Table Of Contents - Makita EH5000W Technical Information

Petrol hedge trimmers

Hide thumbs Also See for EH5000W:

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -5. Shear Blade (cont.)

ASSEMBLING

(4) Mount Shear blade assembly in the Gear case while fitting Shear blade' boss into the hole of Connecting rod.

Fix the Shear blade assembly to Gear case by driving Hex socket head bolt through the Holder and

each Sleeve 5.

Note: *Do not forget to mount Seal (Fig. 14).

*Apply Makita grease N. No.2 to the portion designated with black triangle (Fig. 15).

Fig. 14

Boss

ADJUSTMENT

(1) Loosen Hex lock nut.

(2) After tightening Hex socket button head bolt, turn it back by 1/4 to 3/8 counterclockwise.

(3) Tighten Hex lock nut fully while locking Hex socket button head bolt with Hex wrench (Fig. 16).

Fig. 16

Tighten Hex lock nut

(4) Check the clearance by inserting 1R366 into the gaps of all Hex socket button head bolts (Fig. 17).

Fig. 17

Holder

Seal

Lock Hex socket button

head bolt.

* If 0.4 gauge can be inserted, the clearance is too big.

It causes poor cutting performance

* If 0.2 gauge can not be inserted, the clearance is too tight.

It causes over consumption of fuel due to high friction load

and heavy load on gears.

Fig. 15

Cam portion

Apply the both of Cam portions

which accept Connecting rods.

Connecting rod

P 8/ 26

Eh7500w Eh6000w