Front Panel Front Panel Buttons Do-Not- This button turns on or turns off the lights on the front panel Disturb of the CVR100W. Turning this button on or off will not affect Mode the normal operation of the CVR100W. Button •...
The numbered lights correspond to the LAN ports on the back panel of the CVR100W. (1-4) • Solid blue when the CVR100W is connected to a device through the corresponding LAN port (1, 2, 3, or 4). • Flashes blue when the CVR100W is sending or receiving data over the LAN port.
• Mechanical Loading—Be sure that the CVR100W is level and stable to avoid any hazardous conditions. Place the CVR100W on a flat surface so that it sits on its four rubber feet. Cisco CVR100W Wireless-N VPN Router Quick Start Guide...
Connect the other end to an Ethernet port on the PC that you will use to run web-based Configuration Utility. Skip this step if you want to connect the PC to the CVR100W through a wireless connection.
Setup Wizard: Connect a PC to an available LAN port on the back panel and power on the PC. Your PC will become a DHCP client of the CVR100W. Start a web browser. In the address bar, enter the default IP address of the CVR100W: 192.168.1.1.
Settings pages to configure other advanced features. You are required to log in to the utility again with the new password. See the help pages or the Cisco CVR100W Wireless-N VPN Router Administration Guide for more information on configuring the advanced features.
Page 8
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.