Table of Contents
Advertisement
Kit Contents
Assembly Components:
(1) Stand Assembly
(1) Dell Monitor Bracket (Attached)
(1) PC Bracket (Attached)
(1) VESA Monitor Bracket
(1) Rear Cover (114-0922 only)
Installation Instructions
Step1
Computer & Cover Installation: Remove the PC Bracket and orient the computer
in the appropriate position on the stand. Remove the 10-32 Truss Head Screw
and attach the cover by hooking it to the top of the computer. Reinstall the Truss
Head Screw to complete the installation of the cover. The computer may need
some adjustment for optimum fit of the cover. Install the PC Bracket with the
Thumb Screw to secure the PC on the stand.
SFF Computer
PC Bracket
Thumb Screw
Step 2a Monitor Attachment: The Stand will attach to most Dell Monitors; the monitor
attaches similar to Dell's monitor stand using the latch and button on back (no
tools required). If your monitor does not attach or you are using a VESA monitor
continue to Step 2b.
Step 2b Dell Monitor Bracket Removal: If you are using the VESA Monitor Bracket, you
will need to remove the Dell Monitor Bracket by loosening the Thumb Screw and
pivot the bracket away from stand.
Thumb Screw
Page 2
Monitor Hardware Package:
(8) Nylon Spacers
(5) M4 x 10mm Pan Head Screws
(5) M4 x 18mm Pan Head Screws
(5) M4 x 25mm Pan Head Screws
Cover
10-32 Truss Head
Dell Monitor Bracket
Advertisement
Table of Contents
