Page 1 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference Cisco MDS SAN-OS Release 3.0(1) Through 3.2(1) August 2007 Americas Headquarters Cisco Systems, Inc.
Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.;...
Page 3 Cisco.com Product Documentation DVD Ordering Documentation Documentation Feedback Cisco Product Security Overview Reporting Security Problems in Cisco Products Product Alerts and Field Notices Obtaining Technical Assistance Cisco Technical Support & Documentation Website Submitting a Service Request lvii Definitions of Service Request Severity...
Page 4: Table Of Contents
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m EXEC Mode Commands for the Cisco MDS 9000 Family EXEC Mode Commands for the Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco Fabric Switch for IBM BladeCenter...
Page 5 Limiting Messages to a Syslog Server 1-45 A Commands C H A P T E R aaa accounting logsize aaa accounting default aaa authentication dhchap default aaa authentication iscsi default aaa authentication login Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 6 4-10 cfs ipv4 mcast-address 4-12 cfs ipv6 distribute 4-14 cfs ipv6 mcast-address 4-16 cfs region 4-18 channel mode active 4-20 channel-group 4-21 cimserver 4-22 class 4-24 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 7 4-54 clear ivr fcdomain database 4-55 clear ivr service-group database 4-56 clear ivr zone database 4-57 clear license 4-58 clear line 4-59 clear logging 4-60 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 8 (configuration) 4-89 clock 4-90 clock set 4-92 cloud discover 4-93 cloud discovery 4-94 cloud-discovery enable 4-96 code-page 4-97 commit 4-98 contract-id 4-99 configure terminal 4-100 copy 4-101 Cisco MDS 9000 Family Command Reference viii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 9 (IPv6-ACL configuration) 5-11 destination interface 5-14 destination-profile 5-16 device-alias (IVR fcdomain database configuration submode) 5-18 device-alias (SDV virtual device configuration submode) 5-19 device-alias abort 5-20 device-alias commit 5-21 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 10 6-11 debug cfs 6-13 debug cimserver 6-15 debug cloud 6-16 debug core 6-18 debug device-alias 6-19 debug dpvm 6-21 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 11 6-66 debug ipsec 6-68 debug isns 6-70 debug ivr 6-72 debug klm 6-74 debug license 6-76 debug logfile 6-77 debug mcast 6-79 debug mip 6-81 debug module 6-82 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 12 6-120 debug tlport 6-121 debug ttyd 6-122 debug vni 6-123 debug vrrp 6-124 debug vsan 6-126 debug wr-reg 6-128 debug wwn 6-129 debug xbar 6-131 debug xbar_driver 6-132 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 13 8-21 fcdomain rcf-reject 8-22 fcdroplatency 8-23 fcflow stats 8-25 fcid-allocation 8-27 fcid-last-byte 8-29 fcinterop fcid-allocation 8-30 fcinterop loop-monitor 8-31 fcip enable 8-32 fcip profile 8-33 Cisco MDS 9000 Family Command Reference xiii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 14 (configuration mode) 8-70 file 8-71 find 8-72 format 8-73 fspf config vsan 8-74 fspf cost 8-76 fspf dead-interval 8-77 fspf enable vsan 8-78 fspf hello-interval 8-79 fspf passive 8-80 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 15 11-30 interface iscsi 11-32 interface mgmt 11-34 interface port-channel 11-35 interface vsan 11-37 ip access-group 11-38 ip access-list 11-40 ip address (FCIP profile configuration submode) 11-43 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 16 11-78 iscsi duplicate-wwn-check 11-80 iscsi dynamic initiator 11-82 iscsi enable 11-84 iscsi enable module 11-85 iscsi import target fc 11-86 iscsi initiator idle-timeout 11-87 iscsi initiator ip-address 11-88 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 17 11-127 ivr refresh 11-128 ivr service-group activate 11-129 ivr service-group name 11-131 ivr virtual-fcdomain-add 11-133 ivr vsan-topology 11-134 ivr vsan-topology database 11-136 ivr withdraw domain 11-138 Cisco MDS 9000 Family Command Reference xvii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 18 14-20 logging timestamp 14-22 M Commands 15-1 C H A P T E R match 15-2 match address 15-4 mcast root 15-5 member (fcalias configuration submode) 15-6 Cisco MDS 9000 Family Command Reference xviii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 19 P Commands 17-1 C H A P T E R passive-mode 17-2 peer-info ipaddr 17-3 periodic-inventory notification 17-5 permit (IPv6-ACL configuration) 17-6 phone-contact 17-9 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 20 C H A P T E R qos class-map 18-2 qos control priority 18-3 qos dwrr-q 18-4 qos enable 18-5 qos policy-map 18-6 qos priority 18-7 qos service 18-8 quiesce 18-9 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 21 19-36 rscn commit vsan 19-37 rscn distribute 19-38 rscn event-tov 19-39 run-script 19-41 rspan-tunnel 19-43 S Commands 20-1 C H A P T E R san-ext-tuner enable 20-2 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 22 20-45 special-frame 20-46 20-47 ssh key 20-48 ssh server enable 20-50 ssm enable feature 20-51 static (iSCSI initiator configuration and iSLB initiator configuration) 20-54 stop 20-56 Cisco MDS 9000 Family Command Reference xxii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 23 20-99 system memlog 20-100 system startup-config 20-101 system statistics reset 20-102 system switchover (EXEC mode) 20-103 system switchover (configuration mode) 20-104 system trace 20-105 system watchdog 20-106 Cisco MDS 9000 Family Command Reference xxiii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 24 21-44 show crypto sad domain ipsec 21-46 show crypto spd domain ipsec 21-48 show crypto transform-set domain ipsec 21-49 show debug 21-50 show debug npv 21-53 Cisco MDS 9000 Family Command Reference xxiv OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 25 21-118 show hosts 21-121 show incompatibility system 21-122 show install all failure-reason 21-123 show install all impact 21-124 show install all status 21-126 show in-order-guarantee 21-128 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 26 21-177 show islb initiator 21-178 show islb merge status 21-180 show islb pending 21-181 show islb pending-diff 21-182 show islb session 21-183 show islb status 21-185 Cisco MDS 9000 Family Command Reference xxvi OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 27 21-274 show rmon 21-278 show role 21-280 show rscn 21-282 show running-config 21-284 show san-ext-tuner 21-287 show santap module 21-288 show santap module dvt brief 21-294 Cisco MDS 9000 Family Command Reference xxvii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 28 21-364 show zone analysis 21-369 show zone-attribute-group 21-375 show zoneset 21-376 T Commands 22-1 C H A P T E R tacacs+ abort 22-2 tacacs+ commit 22-3 Cisco MDS 9000 Family Command Reference xxviii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 29 22-38 telnet 22-39 telnet server enable 22-40 terminal 22-41 time 22-43 time-stamp 22-45 tlport alpa-cache 22-46 traceroute 22-47 transfer-ready-size 22-48 transport email 22-49 trunk protocol enable 22-51 Cisco MDS 9000 Family Command Reference xxix OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 30 26-11 zone mode enhanced vsan 26-12 zone name (configuration mode) 26-13 zone name (zone set configuration submode) 26-16 zone rename 26-17 zone-attribute-group clone 26-18 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 31 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m zone-attribute-group name 26-19 zone-attribute-group rename 26-20 zonename (iSLB initiator configuration) 26-21 zoneset (configuration mode) 26-23 zoneset (EXEC mode) 26-25 Cisco MDS 9000 Family Command Reference xxxi OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 32 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference xxxii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 33: New And Changed Information
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m New and Changed Information Table 1 summarizes the new and changed commands for Cisco MDS SAN-OS Release 3.x, and tells you where they are documented in the Cisco MDS 9000 Family Command Reference. Table 1...
Page 34 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 35 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 36 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 37 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 38 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 39 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 40 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 41 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 42 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 43 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 44 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 45 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 46 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 47 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1 New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued) Feature...
Page 48 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference xlviii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 49 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Preface This preface describes the audience, organization, and conventions of the Cisco MDS 9000 Family Command Reference. It also provides information on how to obtain related documentation.
Page 50: Document Conventions
Default responses to system prompts are in square brackets. !, # An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 51 Means reader take note. Notes contain helpful suggestions or references to material not covered in the Note manual. Means reader be careful. In this situation, you might do something that could result in equipment Caution damage or loss of data. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 52: Related Documentation
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Documentation The documentation set for the Cisco MDS 9000 Family includes the following documents. To find a document online, use the Cisco MDS SAN-OS Documentation Locator at: http://www.cisco.com/en/US/products/ps5989/products_documentation_roadmap09186a00804500c1.html...
Page 53: Cisco Fabric Manager
• • Cisco 10-Gigabit Fibre Channel X2 Transceiver Module Installation Note Obtaining Documentation Cisco documentation and additional literature are available on Cisco.com. This section explains the product documentation resources that Cisco offers. Cisco MDS 9000 Family Command Reference liii OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 54: Product Documentation Dvd
The Product Documentation DVD is a library of technical product documentation on a portable medium. The DVD enables you to access installation, configuration, and command guides for Cisco hardware and software products. With the DVD, you have access to the HTML documentation and some of the PDF files found on the Cisco website at this URL: http://www.cisco.com/univercd/home/home.htm...
Page 55: Reporting Security Problems In Cisco Products
We encourage you to use Pretty Good Privacy (PGP) or a compatible product (for example, GnuPG) to encrypt any sensitive information that you send to Cisco. PSIRT can work with information that has been encrypted with PGP versions 2.x through 9.x.
Page 56: Obtaining Technical Assistance
Modifications to or updates about Cisco products are announced in Cisco Product Alerts and Cisco Field Notices. You can receive Cisco Product Alerts and Cisco Field Notices by using the Product Alert Tool on Cisco.com. This tool enables you to create a profile and choose those products for which you want to receive information.
Page 57: Submitting A Service Request
Cisco engineer. The TAC Service Request Tool is located at this URL: http://www.cisco.com/techsupport/servicerequest For S1 or S2 service requests, or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
Page 58: Obtaining Additional Publications And Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources. The Cisco Online Subscription Center is the website where you can sign up for a variety of • Cisco e-mail newsletters and other communications. Create a profile and then select the subscriptions that you would like to receive.
Page 59: Cli Overview
Formatting Flash Disks and File Systems, page 1-32 • Using the File System, page 1-33 • Role-Based CLI, page 1-39 • • Using Valid Formats and Ranges, page 1-40 • Using Debug Commands, page 1-41 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 60: About The Switch Prompt
If you are connected to the console port when the switch boots up, you see the output shown in Example 1-1. Refer to the Cisco MDS 9100 Series Hardware Installation Guide, the Cisco MDS 9200 Series Hardware Note Installation Guide, the Cisco MDS 9216 Hardware Installation Guide, or the Cisco MDS 9500 Series Hardware Installation Guide for installation and connection instructions.
Page 61 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m About the CLI Command Modes Switches in the Cisco MDS 9000 Family have two main command modes—user EXEC mode and configuration mode. The commands available to you depend on the mode you are in. To obtain a list of available commands in either mode, type a question mark (?) at the system prompt.
Page 62 Exit from this submode fcdomain Enter the interface submode fspf To configure FSPF related parameters Negate a command or set its defaults shutdown Enable/disable an interface switchport Configure switchport parameters Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 63: Exec Mode Options
The next two sections list the EXEC mode commands for the Cisco MDS 9000 Family, the Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter. Not all EXEC mode commands that are supported on the Cisco MDS 9000 Family switches are available on the Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco Fabric Switch for IBM BladeCenter.
Page 64: Fabric Switch For Ibm Bladecenter
Write current configuration zone Execute Zone Server commands zoneset Execute zoneset commands EXEC Mode Commands for the Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco Fabric Switch for IBM BladeCenter switch# ? Exec commands: attach Connect to a specific linecard...
Page 65: Configuration Mode Options
Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter. Not all configuration mode commands that are supported on the Cisco MDS 9000 Family switches are available on the Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco Fabric Switch for IBM BladeCenter.
Page 66 Enter the vsan configuration mode Set secondary base MAC addr and range for additional WWNs zone Zone configuration commands zone-attribute-group Zone attribute group commands zoneset Zoneset configuration commands Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 67: Cisco Fabric Switch For Ibm Bladecenter
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Configuration Mode Commands for the Cisco Fabric Switch for HP c-Class BladeSystem and the...
Page 68 The do command applies to all EXEC mode commands other than the end and exit commands. You can also use the help (?) and command completion (tab) features for EXEC commands when issuing a do command along with the EXEC command. Cisco MDS 9000 Family Command Reference 1-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 69 Exit Ctrl-Z Ctrl-L Clear screen Table 1-3 displays the commonly used configuration submodes for the Cisco MDS 9000 Family. Table 1-3 Submodes Within the Configuration Mode for the Cisco MDS 9000 Family Submode Name From Configuration Mode Enter Submode Prompt...
Page 70 Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco Fabric Switch for IBM BladeCenter. Table 1-4 Submodes Within the Configuration Mode for the Cisco Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco Fabric Switch for IBM BladeCenter Submode Name...
Page 71: Navigating Through Cli Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Table 1-4 Submodes Within the Configuration Mode for the Cisco Cisco Fabric Switch for HP c-Class BladeSystem and the Cisco Fabric Switch for IBM BladeCenter (continued)
Page 72: Command Completion
1 switch(config)# You cannot delete a zone facility called test while residing in it. You must first exit the zone submode and return to configuration mode. Cisco MDS 9000 Family Command Reference 1-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 73: Port Names And Port Mapping
The Cisco Fabric Switch for HP c-Class BladeSystem has a different port naming convention from the Cisco MDS 9000 Family. It has eight external ports and they are labeled ext1 through ext8. It has 16 internal ports and they are labeled bay1 through bay16.
Page 74 When you enter commands that require port names for the Cisco Fabric Switch for HP c-Class BladeSystem or the Cisco Fabric Switch for IBM BladeCenter, use the appropriate naming convention from either Table 1-5 Table 1-6.
Page 75: Entering Cli Commands
You can create an ASCII file containing a switch configuration and then load this file on the required • system. You can then use the CLI to edit and activate the file. (Refer to the Cisco MDS 9000 Family CLI Configuration Guide for further information.) Viewing Switch Configurations You can view the ASCII form of the configuration file when required.
Page 76 *** Startup-config --- Running-config ****************** 1,16 **** fcip enable ip default-gateway 172.22.91.1 iscsi authentication none iscsi enable ! iscsi import target fc iscsi virtual-target name vt pWWN 21:00:00:04:cf:4c:52:c1 Cisco MDS 9000 Family Command Reference 1-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 77: Saving A Configuration
Once this command is issued, the running and the startup copies of the configuration are identical. Refer to the Cisco MDS 9000 Family CLI Configuration Guide for further information. Cisco MDS 9000 Family Command Reference 1-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 78: Clearing A Configuration
The show command is always entered in EXEC mode. Note When output continues beyond what is displayed on your screen, the Cisco MDS SAN-OS CLI displays a --More-- prompt. Pressing Return displays the next line; pressing the Spacebar displays the next screen of output.
Page 79: Multiple Filter Commands
1-21. Multiple Filter Commands Cisco MDS SAN-OS Release 2.1(1a) supports using multiple filters in the same show command output. This means you can use a combination of the available filters to format the output of any show command. The maximum number of commands allowed is four. For example, you can enter a maximum of three Note filter commands or two filter commands and a redirection.
Page 80 1 boot ssi bootflash:/laslc1.bin module 2 boot ssi bootflash:/laslc1.bin module 3 boot ssi bootflash:/laslc1.bin module 4 boot ssi bootflash:/laslc1.bin module 7 Cisco MDS 9000 Family Command Reference 1-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 81 The following output of the show interface brief EXEC command. It displays the interfaces where the administration mode is switch# show interface brief | include FX fc4/1 sfpAbsent fc4/2 sfpAbsent fc4/3 sfpAbsent fc4/4 sfpAbsent fc4/5 fc4/6 sfpAbsent fc4/7 sfpAbsent Cisco MDS 9000 Family Command Reference 1-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 82: Displaying Users
The show users command displays all users currently accessing the switch. switch# show users admin pts/7 Jan 12 20:56 (10.77.202.149) admin pts/9 Jan 12 23:29 (modena.cisco.com) admin pts/11 Jan 13 01:53 (dhcp-171-71-49-49.cisco.com) Cisco MDS 9000 Family Command Reference 1-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 83: Sending Messages To Users
The traceroute command prints the routes taken by a specified host or IP address. The syntax for this command is traceroute <host or ip address> switch# traceroute www.cisco.com traceroute to www.cisco.com (171.71.181.19), 30 hops max, 38 byte packets kingfisher1-92.cisco.com (172.22.92.2) 0.598 ms 0.470 ms...
Page 84: Setting The Switch's Shell Timeout
: ATE0Q1&D2&C1S0=1\015 Hardware Flowcontrol: ON Statistics: tx:35 rx:0 Register Bits:RTS|DTR Clearing VTY Sessions Use the clear line command to close a specified VTY session: switch# clear line Aux Cisco MDS 9000 Family Command Reference 1-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 85: Setting The Switch's Terminal Timeout
The syntax for this command is terminal width columns switch# terminal width 86 Sets the screen length for the current session to 86 columns for the current terminal session. The default is 80 columns. Cisco MDS 9000 Family Command Reference 1-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 86: Displaying Terminal Settings
5 minutes input rate 256 bits/sec, 32 bytes/sec, 1 frames/sec 5 minutes output rate 256 bits/sec, 32 bytes/sec, 1 frames/sec 232692 frames input, 7447280 bytes 0 discards, 0 errors 0 CRC, 0 unknown class Cisco MDS 9000 Family Command Reference 1-28 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 87: User-Defined Cli Persistent Variables
Use the show cli var command to display user-defined CLI persistent variable. The following example displays user-defined CLI persistent variables. switch# show cli variables VSH Variable List ----------------- TIMESTAMP="2005-10-24-21.37.13" mgmtport="mgmt 0" Cisco MDS 9000 Family Command Reference 1-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 88: System Defined Variables
System Defined Variables Cisco MDS SAN-OS supports one predefined variable: TIMESTAMP. This variable refers to the time of execution of the command in the format YYYY-MM-DD-HH.MM.SS. The TIMESTAMP variable name is case sensitive. All letters must be uppercase.
Page 89: Defining Command Aliases
:show interface brief shfcintup :shintbr | include up | include fc About Flash Devices Every switch in the Cisco MDS 9000 Family contains one internal bootflash (see Figure 1-2). The Cisco MDS 9500 Series additionally contains one external CompactFlash called slot0 (see...
Page 90: Internal Bootflash
CompactFlash 1 Internal bootflash: All switches in the Cisco MDS 9000 Family have one internal bootflash: that resides in the supervisor or switching module.You have access to two directories within the internal bootflash: file system. The volatile: directory which provides temporary storage, and is also the default. Files in temporary •...
Page 91: Formatting Slot0
The Cisco MDS SAN-OS software only supports Cisco-certified CompactFlash devices that are Caution formatted using Cisco MDS switches. Using uncertified CompactFlash devices may result in unpredictable consequences; formatting CompactFlash devices using other platforms may result in errors.
Page 92: Setting The Current Directory
Creating a New Directory The mkdir command creates a directory at the current directory level or at a specified directory level. The syntax for this command is mkdir directory name Cisco MDS 9000 Family Command Reference 1-34 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 93: Deleting An Existing Directory
This example copies the file called samplefile from the external CompactFlash (slot0) directory to the mystorage directory. switch# copy slot0:samplefile slot0:mystorage/samplefile This example copies a file from the current directory level. switch# copy samplefile mystorage/samplefile Cisco MDS 9000 Family Command Reference 1-35 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 94: Deleting Files
You can also use the copy command to upload and download files from the slot0: or bootflash: file system to or from a FTP, TFTP, SFTP, or SCP server. Refer to the Cisco MDS 9000 Family CLI Configuration Guide for further information. Deleting Files The delete command deletes a specified file or the specified directory and all its contents.
Page 95: Directing Show Command Output To A File
This example unzips the file that was compressed in the previous example: switch# gunzip samplefile /volatile/samplefile.gz: No such file or directory switch# gunzip Samplefile switch# dir 1525859 Jul 04 00:51:03 2003 Samplefile Usage for volatile:// Cisco MDS 9000 Family Command Reference 1-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 96: Displaying The Last Line In A File
0 frames input, 0 bytes, 0 discards 0 runts, 0 jabber, 0 too long, 0 too short 0 input errors, 0 CRC, 0 invalid transmission words 0 address id, 0 delimiter Cisco MDS 9000 Family Command Reference 1-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 97: Setting The Delay Time
When you execute a command, perform command completion, or obtain context sensitive help, the switch software allows the operation to progress if you have the correct permission as specified in the description of the command. Cisco MDS 9000 Family Command Reference 1-39 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 98: Using Valid Formats And Ranges
Do not enter ellipsis ( ... ), vertical bar ( | ), less or great ( < > ), bracket ( [ ] ), or braces ( { } ) in Note command lines. These characters have special meaning in Cisco MDS SAN-OS text strings. Some commands require a MAC address, IP address, or IDs that must be designated in a standard format or given a range.
Page 99: Using Debug Commands
Not all debugging commands listed in the debug ? output are described in this document. Commands are included here based on their usefulness in assisting you to diagnose network problems. Commands not included are typically used internally by Cisco engineers during the development process and are not intended for use outside the Cisco environment.
Page 100: Generating Debug Command Output
Possible destinations include the console, virtual terminals, internal buffer, and UNIX hosts running a syslog server. The syslog format is compatible with 4.3 Berkeley Standard Distribution (BSD) UNIX and its derivatives. Cisco MDS 9000 Family Command Reference 1-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 101: Enabling Message Logging
Critical conditions exist. LOG_CRIT errors Error conditions exist. LOG_ERR warnings Warning conditions exist. LOG_WARNING notification Normal, but significant, conditions LOG_NOTICE exist. informational Informational messages. LOG_INFO debugging Debugging messages. LOG_DEBUG Cisco MDS 9000 Family Command Reference 1-43 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 102: Limiting The Types Of Logging Messages Sent To The Console
(virtual console), use the terminal monitor privileged EXEC command. The no logging monitor command disables logging to terminal lines other than the console line. Cisco MDS 9000 Family Command Reference 1-44 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 103: Logging Messages To A Unix Syslog Server
Output from the debug commands, displayed at the debugging level. The show logging privileged EXEC command displays the addresses and levels associated with the current logging setup. The command output also includes ancillary statistics. Cisco MDS 9000 Family Command Reference 1-45 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 104 /usr/adm/logs/tiplog. The file must already exist, and the syslog daemon must have permission to write to it. For the System V UNIX systems, the line should read as follows: local7.debug /usr/admin/logs/cisco.log Cisco MDS 9000 Family Command Reference 1-46 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 105: A Commands
C H A P T E R A Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 106: Aaa Accounting Logsize
29000 Related Commands Command Description show accounting logsize Displays the configured log size. show accounting log Displays the entire log file. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 107: Aaa Accounting Default
The following example reverts to the local accounting (default). switch(config)# no aaa accounting default group TacServer Related Commands Command Description show aaa accounting Displays the configured accounting methods. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 108: Aaa Authentication Dhchap Default
The following example reverts to the local authentication method (default). switch(config)# no aaa authentication dhcahp default group TacServer Related Commands Command Description show aaa authentication Displays the configured authentication methods. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 109: Aaa Authentication Iscsi Default
The following example reverts to the local authentication method (default). switch(config)# no aaa authentication iscsi default group TacServer Related Commands Command Description show aaa authentication Displays the configured authentication methods. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 110: Aaa Authentication Login
TacServer The following example enables console authentication to use the group called TacServer, followed by the local login method. switch(config)# aaa authentication login console group TacServer Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 111 The following example reverts to the default authentication method for login, which is the Password Authentication Protocol (PAP). switch(config)# no aaa authentication login mschap enable Related Commands Command Description show aaa authentication Displays the configured authentication methods. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 112: Aaa Authentication Login Password-Aging Enable
The following example reverts to the Password Authentication Password (PAP) authentication method (default) switch(config)# no aaa authentication login password-aging enable Related Commands Command Description show aaa Displays the status of the password aging notification (enabled/disabled). authentication login password-aging Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 113: Aaa Group Server
AAA service using the aaa authentication or the aaa accounting commands. switch# config terminal switch(config)# aaa group server tacacs+ TacacsServer1 switch(config-tacacs+)# server ServerA switch(config-tacacs+)# exit switch(config)# aaa group server radius RadiusServer19 switch(config-radius)# server ServerB switch(config-radius)# no server ServerZ Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 114 Related Commands Command Description show aaa groups Displays all configured server groups. show radius-server groups Displays configured RADIUS server groups show tacacs-server groups Displays configured TACACS server groups Cisco MDS 9000 Family Command Reference 2-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 115: Abort
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 2-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 116: Active Equals Saved
FICON-enabled VSANs, and one of these VSANs has active equals saved enabled, changes made to the non-FICON configuration causes all FICON-enabled configurations to be saved to the IPL file. Refer to the Cisco MDS 9000 Family CLI Configuration Guide for further information. Note Examples The following example enables the automatic save feature for a VSAN.
Page 117: Alert-Group
Five commands can be specified per alert group. Invalid commands are rejected. Note Make sure the destination profiles for the non-Cisco-TAC alert group, with a predefined show command, and the Cisco-TAC alert group are not the same.
Page 118 Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 2-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 119: Arp
10.1.1.1 switch(config)# Related Commands Command Description show arp Displays the ARP table. clear arp Deletes a specific entry or all entries from the ARP table. Cisco MDS 9000 Family Command Reference 2-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 120: Attach
You can use the attach module command to view the standby supervisor module information, but you cannot configure the standby supervisor module using this command. You can also use the attach module command on the switching module portion of the Cisco MDS 9216 supervisor module, which resides in slot 1 of this two-slot switch.
Page 121: Attachpriv
To exit type 'exit', to abort type '$.' module-1# exit Related Commands Command Description exit Disconnects from the module. show module Displays the status of a module. Cisco MDS 9000 Family Command Reference 2-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 122: Attribute Qos
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# ivr zone name IvrZone switch(config-ivr-zone)# attribute qos priority low Related Commands Command Description show ivr zone Displays IVR zone configuration. Cisco MDS 9000 Family Command Reference 2-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 123: Authentication
The following example shows how to configure the authentication method using the RSA signatures. switch(config-ike-ipsec-policy)# authentication rsa-sig The following example shows how to revert to the default authentication method (preshared key). switch(config-ike-ipsec-policy)# no authentication rsa-sig Cisco MDS 9000 Family Command Reference 2-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 124 Enables the IKE protocol. identity hostname Configures the identity for the IKE protocol. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 2-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 125: Autonomous-Fabric-Id (Ivr Topology Database Configuration)
• AFIDs do not share a switch. You can have up to 64 VSANs (or 128 VSANs for Cisco MDS SAN-OS Release 2.1(1a) or later) in an IVR topology. Specify the IVR topology using the following information: The switch WWNs of the IVR-enabled switches.
Page 126 The autonomous fabric ID (AFID), which distinguishes two VSANs that are logically and physically separate, but have the same VSAN number. Cisco MDS SAN-OS Release 1.3(1) and later supports only one default AFID (AFID 1) and thus does not support non-unique VSAN IDs in the network.
Page 127: Autonomous-Fabric-Id (Ivr Service Group Configuration)
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# ivr enable switch(config)# ivr distribute switch(config)# ivr vsan-topology auto switch(config)# ivr service-group name serviceGroup1 switch(config-ivr-sg)# autonomous-fabric-id 10 vsan 1-4 Cisco MDS 9000 Family Command Reference 2-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 128 Configures an IVR service group and changes to IVR service group configuration submode. show autonomous-fabric-id database Displays the contents of the AFID database. show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 2-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 129: Autonomous-Fabric-Id Database
Configures a switch WWN in the autonomous fabric ID (AFID) database show autonomous-fabric-id database Displays the contents of the AFID database. show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 2-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 130 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 2-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 131: Chapter 3 B Commands
C H A P T E R B Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 132: Banner Motd
Usage Guidelines The configured MOTD banner is displayed before the login prompt on the terminal whenever a user logs in to a Cisco MDS 9000 Family switch. Follow these guidelines when choosing your delimiting character: Do not use the delimiting-character in the message string.
Page 133 Enter TEXT message. End with the character '#'. Welcome to switch $(hostname). You tty line is $(line). Related Commands Command Description show banner motd Displays the configured banner message. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 134: Boot
This command was introduced 3.0(1) Changed the default state for auto-copy to enabled. Usage Guidelines The boot kickstart slot0:image command is currently not allowed. For kickstart, only bootflash: is allowed. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 135 The following example disables the automatic copy feature (default). switch(config)# no boot auto-copy Related Commands Command Description show boot Displays the configured boot variable information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 136: Bport
1 switch(config-if)# bport Related Commands Command Description show interface fcip Displays an interface configuration for a specified FCIP interface. bport-keepalive Configures B port keepalive responses. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 137: Bport-Keepalive
1 switch(config-if)# bport-keepalives Related Commands Command Description show interface fcip Displays an interface configuration for a specified FCIP interface. bport Configures a B port FCIP interface. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 138: Broadcast
Displays zone attribute group information. zone mode enhanced vsan Enables enhanced zoning for a VSAN. zone name Configures zone attributes. zone-attribute-group name Configures zone attribute groups. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 139: Chapter 4 C Commands
C H A P T E R C Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “About the CLI Command Modes”...
Page 140: Callhome
When an alert is sent, Call Home associates the alert group with an alert type and attaches the output of the show commands to the alert message. Make sure the destination profiles for the non-Cisco-TAC alert group, with a predefined show command, Note and the Cisco-TAC alert group are not the same.
Page 141 Customizes a CallHome alert group with user-defined show commands. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 142: Callhome Test
Related Commands Command Description callhome Configures Call Home functions. show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 143 Lists available file systems and their alias prefix names. undelete Recovers a file marked deleted on a Class A or Class B Flash file system. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 144: Cdp
Use the no form of this command to disable this feature. When the interface link is established, CDP is enabled by default CDP version 1 (v1) and version 2 (v2) are supported in Cisco MDS 9000 Family switches. CDP packets with any other version number are silently discarded when received.
Page 145 Related Commands Command Description clear cdp Clears global or interface-specific CDP configurations. show cdp Displays configured CDP settings and parameters. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 146: Cfs Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m cfs distribute To enable or disable Cisco Fabric Services (CFS) distribution on the switch, use the cfs distribute command in configuration mode. To disable this feature, use the no form of the command.
Page 147 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show cfs status Displays whether CFS distribution is enabled or disabled. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 148: Cfs Ipv4 Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m cfs ipv4 distribute To enable Cisco Fabric Services (CFS) distribution over IPv4 for applications that want to use this feature, use the cfs ipv4 command in configuration mode. To disable this feature, use the no form of the command.
Page 149 Related Commands Command Description cfs ipv4 mcast-address Configures an IPv4 multicast address for Cisco Fabric Services (CFS) distribution over IPv4. show cfs status Displays whether CFS distribution is enabled or disabled. Cisco MDS 9000 Family Command Reference 4-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 150: Cfs Ipv4 Mcast-Address
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m cfs ipv4 mcast-address To configure an IPv4 multicast address for Cisco Fabric Services (CFS) distribution over IPv4, use the cfs ipv4 mcast-address command in configuration mode. To disable this feature, use the no form of the command.
Page 151 Are you sure? (y/n) [n] y Related Commands Command Description cfs ipv4 distribute Enables or disables Cisco Fabric Services (CFS) distribution over IPv4. show cfs status Displays whether CFS distribution is enabled or disabled. Cisco MDS 9000 Family Command Reference 4-13...
Page 152: Cfs Ipv6 Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m cfs ipv6 distribute To enable Cisco Fabric Services (CFS) distribution over IPv6 for applications that want to use this feature, use the cfs ipv6 distribute command in configuration mode. To disable this feature, use the no form of the command.
Page 153 Related Commands Command Description cfs ipv6 mcast-address Configures an IPv6 multicast address for Cisco Fabric Services (CFS) distribution over IPv6. show cfs status Displays whether CFS distribution is enabled or disabled. Cisco MDS 9000 Family Command Reference 4-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 154: Cfs Ipv6 Mcast-Address
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m cfs ipv6 mcast-address To configure an IPv6 multicast address for Cisco Fabric Services (CFS) distribution over IPv6, use the cfs ipv6 mcast-address command in configuration mode. To disable this feature, use the no form of the command.
Page 155 Are you sure? (y/n) [n] y Related Commands Command Description cfs ipv6 distribute Enables or disables Cisco Fabric Services (CFS) distribution over IPv6. show cfs status Displays whether CFS distribution is enabled or disabled. Cisco MDS 9000 Family Command Reference 4-17...
Page 156: Cfs Region
Cisco Fabric Services (CFS) regions provide the ability to create distribution islands within the application scope. Currently, the regions are supported only for physical scope applications. In the absence of any region configuration, the application will be a part of the default region.
Page 157 WARNING: All applications in the region wiil be moved to default region. Are you sure? (y/n) [n] y Related Commands Command Description show cfs regions Displays all configured applications with peers. Cisco MDS 9000 Family Command Reference 4-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 158: Channel Mode Active
The following example shows how to disable channel mode on a PortChannel interface. switch# config terminal switch(config)# interface port-channel 10 switch(config-if)# no channel mode active Related Commands Command Description show interface port-channel Displays PortChannel interface information. Cisco MDS 9000 Family Command Reference 4-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 159: Channel-Group
The following example shows how to enable auto creation of a PortChannel. switch# config terminal switch(config)# interface fc3/9 switch(config-if)# channel-group auto Related Commands Command Description show interface port-channel Displays PortChannel interface information. Cisco MDS 9000 Family Command Reference 4-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 160: Cimserver
Modification 1.3(1) This command was introduced. Usage Guidelines A CIM client is required to access the CIM server. The client can be any client that supports CIM. Cisco MDS 9000 Family Command Reference 4-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 161 The following example disables HTTP and reverts to the switch default. switch(config)# no cimserver enablehttp Related Commands Command Description show csimserver Displays configured CIM settings and parameters. Cisco MDS 9000 Family Command Reference 4-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 162: Class
Enables the QoS data traffic feature on the switch. qos class-map Configures a QoS class map. qos policy-map Configures a QoS policy map. dscp Configures the DSCP in the QoS policy map class. Cisco MDS 9000 Family Command Reference 4-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 163 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Command Description priority Configures the priority in the QoS policy map class. show qos Displays the current QoS settings. Cisco MDS 9000 Family Command Reference 4-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 164: Clear Accounting Log
Usage Guidelines None. Examples The following example clears the accounting log. switch# clear accounting session Related Commands Command Description show accounting log Displays the accounting log contents. Cisco MDS 9000 Family Command Reference 4-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 165: Clear Arp-Cache
Examples The following example shows how to clear the arp-cache table entries. switch# clear arp-cache Related Commands Command Description show arp Displays Address Resolution Protocol (ARP) entries. Cisco MDS 9000 Family Command Reference 4-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 166: Clear Callhome Session
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m clear callhome session To clear Call Home Cisco Fabric Services (CFS) session configuration and locks, use the clear callhome session command.
Page 167: Clear Cdp
4/1 switch# Related Commands Command Description Configures global or interface-specific CDP settings and parameters. show cdp Displays configured CDP settings and parameters. Cisco MDS 9000 Family Command Reference 4-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 168: Clear Cores
The following example shows how to clear all core dumps for the switch. switch# clear cores Related Commands Command Description show cores Displays core dumps that have been made. Cisco MDS 9000 Family Command Reference 4-30 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 169: Clear Counters (Exec Mode)
The following example shows how to clear counters for a VSAN interface. switch# clear counters interface vsan 13 Related Commands Command Description Displays interface information. show interface Cisco MDS 9000 Family Command Reference 4-31 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 170: Clear Counters (San Extension N Port Configuration Mode)
10:00:00:00:00:00:00:00 switch(san-ext)# nport pwwn 12:00:00:00:00:00:00:56 vsan 13 interface gigabitethernet switch(san-ext-nport)# clear counters Related Commands Command Description show san-ext-tuner Displays SAN extension tuner information. Cisco MDS 9000 Family Command Reference 4-32 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 171: Clear Crypto Ike Domain Ipsec Sa
Description crypto ike domain ipsec Configures IKE information. crypto ike enable Enables the IKE protocol. show crypto ike domain Displays IKE information for the IPsec domain. ipsec Cisco MDS 9000 Family Command Reference 4-33 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 172: Clear Crypto Sa Domain Ipsec
1/2 inbound sa 1 Related Commands Command Description show crypto sad Displays IPsec security association database information. domain ipsec Cisco MDS 9000 Family Command Reference 4-34 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 173: Clear Debug-Logfile
This command was introduced. Examples The following example shows how to clear the debug logfile. switch# clear debug-logfile debuglog Related Commands Command Description show debug logfilw Displays the logfile contents. Cisco MDS 9000 Family Command Reference 4-35 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 174: Clear Device-Alias
Examples The following example shows how to clear the device alias session. switch# clear device-alias session Related Commands Command Description show device-alias Displays device alias database information. Cisco MDS 9000 Family Command Reference 4-36 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 175: Clear Dpvm
The following example shows how to clear a session. switch# clear dpvm session Related Commands Command Description dpvm enable Enables DPVM. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 4-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 176: Clear Fabric-Binding Statistics
The following example clears existing fabric binding statistics in VSAN 1. switch# clear fabric-binding statistics vsan 1 Related Commands Command Description show fabric-binding efmd statistics Displays existing fabric binding statistics information. Cisco MDS 9000 Family Command Reference 4-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 177: Clear Fcanalyzer
The following example shows how to clear the entire list of configured hosts for remote capture. switch# clear fcanalyzer Related Commands Command Description show fcanalyzer Displays the list of hosts configured for a remote capture. Cisco MDS 9000 Family Command Reference 4-39 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 178: Clear Fcflow Stats
The following example shows how to clear aggregated Fibre Channel flow statistics for flow index 1 of module 2. switch(config)# # clear fcflow stats aggregated module 2 index 1 Related Commands Command Description show fcflow Displays the fcflow statistics. Cisco MDS 9000 Family Command Reference 4-40 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 179: Clear Fcns Statistics
= 0 reject responses sent = 0 RSCNs received = 0 RSCNs sent = 0 switch# Related Commands Command Description show fcns statistics Displays the name server statistics. Cisco MDS 9000 Family Command Reference 4-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 180: Clear Fcs Statistics
The following example shows how to clear the fabric configuration server statistics for VSAN 10. switch# clear fcs statistics vsan 10 Related Commands Command Description show fcs statistics Displays the fabric configuration server statistics information. Cisco MDS 9000 Family Command Reference 4-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 181: Clear Fctimer Session
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m clear fctimer session To clear fctimer Cisco Fabric Services (CFS) session configuration and locks, use the clear fctimer session command.
Page 182: Clear Fc-Redirect Config Vt
Deleting a configuration MAY result in DATA CORRUPTION. Do you want to continue? (y/n) [n] y Related Commands Command Description show fc-redirect Displays all active configurations on the switch. active-configs Cisco MDS 9000 Family Command Reference 4-44 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 183: Clear Ficon
1 allegiance The following example clears the VSAN clock for VSAN 20. switch# clear ficon vsan 20 timestamp Related Commands Command Description show ficon Displays configured FICON details. Cisco MDS 9000 Family Command Reference 4-45 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 184: Clear Fspf Counters
The following example clears FSPF statistics specific to the Fibre Channel interface in VSAN 1, Slot 9 Port 32. switch# clear fspf counters vsan 1 interface fc 9/32 Related Commands Command Description show fspf Displays global FSPF information for a specific VSAN. Cisco MDS 9000 Family Command Reference 4-46 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 185: Clear Install Failure-Reason
This command was introduced. Usage Guidelines This command is supported only on the Cisco MDS 9124 Fabric Switch. Examples The following example removes all upgrade failure reason logs on a Cisco MDS 9124 Fabric Switch. switch# clear install failure-reason Related Commands Command...
Page 186: Clear Ip Access-List Counters
The following example clears the counters for an IP access list. switch# clear ip access-list counters adminlist Related Commands Command Description show ip access-list Displays IP access list information. Cisco MDS 9000 Family Command Reference 4-48 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 187: Clear Ips Arp
10.2.2.2 interface gigabitethernet 8/7 arp clear successful The following example clears all ARP cache entries switch# clear ips arp interface gigabitethernet 8/7 arp clear successful Cisco MDS 9000 Family Command Reference 4-49 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 188: Clear Ips Stats
Release Modification 3.0(1) This command was introduced. Examples The following example clears all IPS statistics on the specified interface. switch# clear ips all interface gigabitethernet 8/7 switch# Cisco MDS 9000 Family Command Reference 4-50 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 189: Clear Ips Stats Fabric Interface
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m clear ips stats fabric interface To clear the statistics for a given iSCSI or FCIP interface on a Cisco MDS 9000 18/4-Port Multi Service Module IPS linecard, use the clear ips stats fabric interface command.
Page 190: Clear Ipv6 Access-List
The following example displays information about an IPv6-ACL. switch# clear ipv6 access-list testlist switch# Related Commands Command Description ipv6 access-list Configures an IPv6-ACL. show ipv6 Displays IPv6 configuration information. Cisco MDS 9000 Family Command Reference 4-52 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 191: Clear Ipv6 Neighbors
The following example flushes the IPv6 neighbor cache table. switch# clear ipv6 neighbors switch# Related Commands Command Description ipv6 nd Configures IPv6 neighbor discovery commands. show ipv6 neighbors Displays IPv6 neighbors configuration information. Cisco MDS 9000 Family Command Reference 4-53 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 192: Clear Islb Session
Displays iSLB pending configuration differences. show islb session Displays iSLB session information. show islb status Displays iSLB CFS status. show islb vrrp Displays iSBL VRRP load balancing information. Cisco MDS 9000 Family Command Reference 4-54 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 193: Clear Ivr Fcdomain Database
The following example clears all IVR fcdomain database information. switch# clear ivr fcdomain database Related Commands Command Description show ivr fcdomain database Displays IVR fcdomain database entry information. Cisco MDS 9000 Family Command Reference 4-55 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 194: Clear Ivr Service-Group Database
The following example clears the ivr service-group database. switch# clear ivr service-group database Related Commands Command Description show ivr service-group Displays an IVR service group database. database Cisco MDS 9000 Family Command Reference 4-56 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 195: Clear Ivr Zone Database
None. Command Modes EXEC. Command History Release Modification 1.3(1) This command was introduced. Examples The following example clears all configured IVZ information. switch# clear ivr zone database Cisco MDS 9000 Family Command Reference 4-57 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 196: Clear License
The following example clears a specific license. switch# clear license Ficon.lic Clearing license Ficon.lic: SERVER this_host ANY VENDOR cisco # An example fcports license INCREMENT SAN_EXTN_OVER_IP cisco 1.000 permanent 1 HOSTID=VDH=ABCD \ NOTICE=<LicFileID>san_extn2.lic</LicFileID><LicLineID>1</LicLineID> \ SIGN=67CB2A8CCAC2 Do you want to continue? (y/n) y Clearing license ..done switch#...
Page 197: Clear Line
This command was introduced. Examples The following example clears one ARP cache entry: switch# clear line Aux arp clear successful Related Commands Command Description show line Displays line information. Cisco MDS 9000 Family Command Reference 4-59 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 198: Clear Logging
!!!WARNING! This will clear the selected logging buffer!! Do you want to continue? (y/n) Related Commands Command Description show logging Displays logging information. Cisco MDS 9000 Family Command Reference 4-60 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 199: Clear Ntp
The following example shows how to clear NTP statistics for memory. switch# clear ntp statistics memory Related Commands Command Description show ntp Displays the configured server and peer associations. Cisco MDS 9000 Family Command Reference 4-61 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 200: Clear Port-Security
1 The following example clears learnt entries in the active database up to for the entire VSAN. switch# clear port-security database auto-learn vsan 1 Cisco MDS 9000 Family Command Reference 4-62 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 201 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show port-security Displays the configured port security information. Cisco MDS 9000 Family Command Reference 4-63 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 202: Clear Processes Log
The following examples show how to clear all of the log files on the switch. switch# clear processes log all Related Commands Command Description show processes Displays the detailed running or log information of processes or high availability applications. Cisco MDS 9000 Family Command Reference 4-64 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 203: Clear Qos Statistics
The following examples shows how to clear the quality of service counters. switch# clear qos statistics Related Commands Command Description show qos statistics Displays the current QoS settings, along with a number of frames marked high priority. Cisco MDS 9000 Family Command Reference 4-65 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 204: Clear Radius Session
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m clear radius session To clear RADIUS Cisco Fabric Services (CFS) session configuration and locks, use the clear radius session command.
Page 205: Clear Rlir
To clear the Registered Link Incident Report (RLIR), use the clear rlir command in EXEC mode. clear rlir {history | recent {interface fc slot/port | portnumber port-number} | statistics vsan vsan-id} On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM Note BladeCenter, the syntax differs as follows:...
Page 206 The following example clears recent RLIR information for a specified port number. switch# clear rlir recent portnumber 16 Related Commands Command Description show rscn Displays RSCN information. Cisco MDS 9000 Family Command Reference 4-68 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 207: Clear Role Session
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m clear role session To clear authentication role Cisco Fabric Services (CFS) session configuration and locks, use the clear role session command.
Page 208: Clear Rscn Session Vsan
The following example clears an RSCN session on VSAN 1. switch# clear rscn session vsan 1 Related Commands Command Description rscn Configures an RSCN. show rscn Displays RSCN information. Cisco MDS 9000 Family Command Reference 4-70 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 209: Clear Rscn Statistics
Examples The following example shows how to clear rcsn statistics for VSAN 1. switch# clear rscn statistics 1 Related Commands Command Description show rscn Displays RSCN information. Cisco MDS 9000 Family Command Reference 4-71 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 210: Clear Santap Module
Configures the mapping between the Storage Services Module (SSM) and the VSAN where the appliance is configured. show santap module Displays the configuration and statistics of the SANTap feature. Cisco MDS 9000 Family Command Reference 4-72 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 211: Clear Ssm-Nvram Santap Module
The following example shows how to clear the SANTap configuration for a slot 2. switch# clear ssm-nvram santap module 2 Related Commandss Command Description ssm enable feature Enables the SANTap feature on the SSM. Cisco MDS 9000 Family Command Reference 4-73 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 212: Clear Scheduler Logfile
None. Examples The following example shows how to clear the command scheduler logfile. switch# clear scheduler logfile Related Commands Command Description show scheduler Displays command scheduler information. Cisco MDS 9000 Family Command Reference 4-74 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 213: Clear Screen
EXEC mode. Command History Release Modification 1.0(2) This command was introduced. Usage Guidelines None. Examples The following example shows how to clear the terminal screen. switch# clear screen Cisco MDS 9000 Family Command Reference 4-75 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 214: Clear Scsi-Flow Statistics
The following example shows how to clear the SCSI flow statistics counters for SCSI flow ID 3. switch# clear scsi-flow statistics flow-id 3 Related Commands Command Description scsi-flow flow-id Configures the SCSI flow services. show scsi-flow Displays SCSI flow configuration and status. Cisco MDS 9000 Family Command Reference 4-76 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 215: Clear Sdv
The following example shows how to clear SDV statistics. switch# clear sdv statistics vsan 2 Related Commands Command Description sdv enable Enables or disables SAN device virtualization. show sdv statistics Displays SAN device virtualization statistics. Cisco MDS 9000 Family Command Reference 4-77 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 216: Clear Ssh Hosts
The following example shows how to clear reset-reason information from NVRAM and volatile storage. switch# clear ssh hosts Related Commands Command Description show ssh hosts Displays SSH host information. Cisco MDS 9000 Family Command Reference 4-78 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 217: Clear System Reset-Reason
This command was introduced. Usage Guidelines Use this command as listed below: In a Cisco MDS 9500 Series switch, this command clears the reset-reason information stored in • NVRAM and volatile persistent storage in the active and standby supervisor modules.
Page 218: Clear Tacacs+ Session
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m clear tacacs+ session To clear TACACS+ Cisco Fabric Services (CFS) session configuration and locks, use the clear tacacs+ session command.
Page 219: Clear Tlport Alpa-Cache
The following example shows how to clear a TL port ALPA cache. switch# clear tlport alpa-cache Related Commands Command Description show tlport alpa-cache Displays TL port alpa-cache information. Cisco MDS 9000 Family Command Reference 4-81 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 220: Clear User
Usage Guidelines None. Examples The following example shows how to log out a specified user. switch# clear user vsam Related Commands Command Description show users Displays user information. Cisco MDS 9000 Family Command Reference 4-82 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 221: Clear Vrrp
The following example shows how to clear all the software counters for virtual router 7 on VSAN 2. switch# clear vrrp vr 7 interface vsan2 Related Commands Command Description show vrrp Displays VRRP configuration information. vrrp Enables VRRP. Cisco MDS 9000 Family Command Reference 4-83 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 222: Clear Zone
The following examples shows how to clear all configured information in the zone server for VSAN 1. switch# clear zone database vsan 1 Related Commands Command Description show zone Displays zone information for any configured interface. Cisco MDS 9000 Family Command Reference 4-84 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 223: Cli Alias Name
"shintbr| include up | include fc" Cisco MDS 9000 Family Command Reference 4-85 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 224 :shintbr | include up | include fc Related Commands Command Description alias Displays the default alias command for show cli alias. show cli alias Displays all configured aliases. Cisco MDS 9000 Family Command Reference 4-86 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 225: Cli Var Name (Exec)
The following example creates a user-defined CLI variable for a session. switch# cli var name testinterface 3/4 The following example removes a user-defined CLI variable for a session. switch# cli no var name testinterface 3/4 Cisco MDS 9000 Family Command Reference 4-87 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 226 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description cli no var name Removes a user-defined session CLI variable. show cli variables Displays all CLI variables (persistent, session and system). Cisco MDS 9000 Family Command Reference 4-88 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 227: Cli Var Name (Configuration)
The following example creates a persistent user-defined CLI variable. switch# config t switch(config)# cli var name mgmtport mgmt 0 Related Commands Command Description show cli variables Displays all CLI variables (persistent, session and system). Cisco MDS 9000 Family Command Reference 4-89 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 228: Clock
Coordinated Universal Time (UTC) is the same as Greenwich Mean Time (GMT). Command Modes Configuration mode. Command History Release Modification 1.0(2) This command was introduced. 3.1(1) Added a new set of arguments for timezone. Cisco MDS 9000 Family Command Reference 4-90 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 229 Changes the time on the switch. show clock Displays the current date and time. show run Displays changes made to the time zone configuration along with other configuration information. Cisco MDS 9000 Family Command Reference 4-91 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 230: Clock Set
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m clock set To change the system time on a Cisco MDS 9000 Family switch, use the clock set command in EXEC mode.
Page 231: Cloud Discover
3.0(1) This command was introduced. Usage Guidelines This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter. Examples The following example initiates manual, on-demand cloud discovery.
Page 232: Cloud Discovery
If auto discovery is disabled, interface changes result in new members becoming part of an undiscovered Note cloud. No new clouds are formed. This command is not supported on the Cisco MDS 9124 switch. Note Examples The following example enables auto cloud discovery.
Page 233 Initiates manual, on-demand cloud discovery. cloud-discovery enable Enables discovery of cloud memberships. show cloud discovery Displays cloud discovery information. show cloud membership Displays information about members of the cloud. Cisco MDS 9000 Family Command Reference 4-95 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 234: Cloud-Discovery Enable
Modification 3.0(1) This command was introduced. Usage Guidelines This command is not supported on the Cisco MDS 9124 switch. Examples The following example enables discovery of cloud memberships. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z.
Page 235: Code-Page
The following example reverts to the factory default of using the us-canada EBCDIC format. switch(config-ficon)# no code-page Related Commands Command Description show ficon Displays configured FICON details. ficon vsan vsan-id Enables FICON on the specified VSAN. Cisco MDS 9000 Family Command Reference 4-97 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 236: Commit
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 4-98 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 237: Contract-Id
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 4-99 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 238: Configure Terminal
The following example enters the configuration mode: switch# configure terminal switch(config)# The following example enters the configuration mode using an abbreviated format of the command: switch# config terminal switch(config)# Cisco MDS 9000 Family Command Reference 4-100 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 239: Copy
Specifies the location for system memory, which includes the running configuration. fabric Specifies a fabric wide startup configuration update using Cisco Fabric Services (CFS) where all the remote switches in the fabric copy their running configuration (source) file into their startup configuration (destination) file.
Page 240 The following example saves your configuration to the startup configuration. switch# copy system:running-config nvram:startup-config The following example copies the file called samplefile from the slot0 directory to the mystorage directory. switch# copy slot0:samplefile slot0:mystorage/samplefile Cisco MDS 9000 Family Command Reference 4-102 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 241 Changes the default directory or file system. Displays a list of files on a file system. reload Reloads the operating system. show version Displays the version of the running configuration file. Cisco MDS 9000 Family Command Reference 4-103 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 242: Copy Licenses
Backing up license done Related Commands Command Description Changes the default directory or file system. Displays a list of files on a file system. install license Installs a license file. Cisco MDS 9000 Family Command Reference 4-104 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 243: Copy Ssm-Nvram Standby-Sup
The following example copies the contents of the SSM NVRAM to the standby Supervisor 2 module. switch# copy ssm-nvram standby-sup Related Commands Command Description copy Saves a backup of the system software. Cisco MDS 9000 Family Command Reference 4-105 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 244: Crypto Ca Authenticate
Conversely, if the trust point was not saved in the startup configuration, the certificates and CRL associated to it are not made persistent automatically because they do not exist without the corresponding trust point after the switch reboots. Cisco MDS 9000 Family Command Reference 4-106 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 245 Related Commands Command Description crypto ca trustpoint Configures the trust point. show crypto ca Displays configured trust point certificates. certificates show crypto ca Displays trust point configurations. trustpoints Cisco MDS 9000 Family Command Reference 4-107 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 246: Crypto Ca Crl Request
This command was introduced. Usage Guidelines Cisco MDS SAN-OS allows you to pre-download CRLs for the trust points and cache the CRLs in the cert store using the crypto ca crl request command. During the verification of a peer certificate by IPsec/IKE or SSH, the issuer CA’s CRL will be consulted only if it had already been configured locally,...
Page 247 Related Commands Command Description revocation-check Configures trust point revocation check methods. show crypto ca crl Displays configured certificate revocation lists (CRL). Cisco MDS 9000 Family Command Reference 4-109 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 248: Crypto Ca Enroll
CA Administrator in order to revoke your certificate. For security reasons your password will not be saved in the configuration. Please make a note of it. Password:nbv123 Cisco MDS 9000 Family Command Reference 4-110 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 249 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m The subject name in the certificate will be: Vegas-1.cisco.com...
Page 250: Crypto Ca Export
Imports the identity certificate and associated RSA key pair and CA trustpoint-label pkcs12 certificate (chain) to a trust point. crypto key generate Generates an RSA key pair. Cisco MDS 9000 Family Command Reference 4-112 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 251 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Command Description rsakeypair Configures and associates the RSA key pair details to a trust point. show crypto key Displays any RSA public key configurations. mypubkey rsa Cisco MDS 9000 Family Command Reference 4-113 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 252: Crypto Ca Import
To ensure the that the configured certificates, CRLs and key pairs are made persistent, always save the running configuration to the startup configuration Cisco MDS 9000 Family Command Reference 4-114 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 253 Configures trust point RSA key pair details. show crypto ca Displays the identity and CA certificate details. certificates show crypto key Displays any RSA public key configurations. mypubkey rsa Cisco MDS 9000 Family Command Reference 4-115 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 254: Crypto Ca Test Verify
Related Commands Command Description show crypto ca Displays configured trust point certificates. certificates Cisco MDS 9000 Family Command Reference 4-116 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 255: Crypto Ca Trustpoint
CA certificate (or certificate chain) and then disassociated the RSA key pair from the trust point. The switch enforces this behavior to prevent the accidental removal of the trust point along with Cisco MDS 9000 Family Command Reference 4-117...
Page 256 Generates a certificate signing request for a trust point. show crypto ca Displays the identity and CA certificate details. certificates show crypto ca Displays trust point configurations. trustpoints Cisco MDS 9000 Family Command Reference 4-118 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 257: Crypto Global Domain Ipsec Security-Association Lifetime
Enables IPsec. set (IPsec crypto map Configures IPsec crypto map entry parameters. configuration submode) show crypto global domain ipsec Displays the global attributes for IPsec. Cisco MDS 9000 Family Command Reference 4-119 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 258: Crypto Ike Domain Ipsec
Usage Guidelines To configure IKE protocol attributes, IKE must be enabled using the crypto ike enable command. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 259: Crypto Ike Domain Ipsec Rekey Sa
This command was introduced. Usage Guidelines To use this command, IKE must be enabled using the crypto ike enable command. This command is not supported on the Cisco MDS 9124 switch. Note Examples The following example rekeys an IKE crypto SA.
Page 260: Crypto Ike Enable
The configuration and verification commands for the IKE protocol are only available when the IKE protocol is enabled on the switch. When you disable this feature, all related configurations are automatically discarded. This command is not supported on the Cisco MDS 9124 switch. Note Examples The following example shows how to enable the IKE protocol.
Page 261: Crypto Ipsec Enable
The configuration and verification commands for IPsec are only available when IPsec is enabled on the switch. When you disable this feature, all related configurations are automatically discarded. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 262: Crypto Key Generate Rsa
CA, which consists of one key pair and one identity certificate. Cisco MDS SAN-OS allows you to generate RSA key pairs with a configurable key size (or modulus). The default key size is 512. Valid modulus values are 512, 768, 1024, 1536, and 2048.
Page 263 Deletes RSA key pair configurations. rsakeypair Configures trust point RSA key pair details. show crypto key Displays information about configured RSA key pairs. mypubkey rsa Cisco MDS 9000 Family Command Reference 4-125 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 264: Crypto Key Zeroize Rsa
Use the copy running-config startup-config command to make the certificate and key pair deletions persistent. Examples The following example shows how to delete an RSA key pair called testkey. switch# config terminal switch(config)# crypto key zeroize rsa testkey Cisco MDS 9000 Family Command Reference 4-126 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 265 Configures an RSA key pair. rsakeypair Configures trust point RSA key pair details. show crypto key Displays information about configured RSA key pairs. mypubkey rsa Cisco MDS 9000 Family Command Reference 4-127 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 266: Crypto Map Domain Ipsec (Configuration Mode)
IPsecMap 1 The following example deletes the entire IPsec crypto map. switch# config terminal switch(config)# no crypto map domain ipsec IPsecMap Cisco MDS 9000 Family Command Reference 4-128 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 267 Configures the transform set for an IPsec crypto map. ipsec set (IPsec crypto map Configures IPsec crypto map entry parameters. configuration submode) show crypto map domain ipsec Displays IPsec crypto map information. Cisco MDS 9000 Family Command Reference 4-129 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 268: Crypto Map Domain Ipsec (Interface Configuration Submode)
IPsecMap Related Commands Command Description crypto ipsec enable Enables IPsec. show crypto map domain ipsec Displays IPsec crypto map information. show interface Displays interface information. Cisco MDS 9000 Family Command Reference 4-130 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 269: Crypto Transform-Set Domain Ipsec
If you want the new settings to take effect sooner, you can clear all or part of the security association database using the clear crypto sa domain ipsec command. Cisco MDS 9000 Family Command Reference 4-131 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 270 Related Commands Command Description clear crypto sa domain ipsec Clears security associations. crypto ipsec enable Enables IPsec. show crypto transform-set Displays IPsec crypto transform set information. domain ipsec Cisco MDS 9000 Family Command Reference 4-132 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 271: Customer-Id
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 4-133 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 272 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 4-134 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 273: D Commands
C H A P T E R D Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 274: Data-Pattern-File
Related Commands Command Description nport pwwn Configures SAN extension tuner N port pWWNs. san-ext-tuner Enters SAN extension tuner configuration mode. show san-ext-tuner Displays SAN extension tuner information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 275: Deadtime (Radius Group Configuration)
10 Related Commands Command Description radius-server Sets a time interval for monitoring a nonresponsive RADIUS server. deadtime show radius-server Displays RADIUS server information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 276: Deadtime (Tacacs+ Group Configuration)
5 Related Commands Command Description tacacs-server Sets a time interval for monitoring a nonresponsive TACACS+ server. deadtime show tacacs-server Displays TACACS+ server information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 277: Delete
If you specify a directory, the delete command deletes the entire directory and all its contents. Caution Examples The following example deletes the file named test from the Flash card inserted in slot 0. switch# delete slot0:test Delete slot0:test? [confirm] Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 278 Displays the contents of the BOOT environment variable, the name of the configuration file pointed to by the CONFIG_FILE environment variable, the contents of the BOOTLDR environment variable, and the configuration register setting. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 279: Delete Ca-Certificate
Related Commands Command Description delete certificate Deletes the identity certificate. delete crl Deletes the crl from the trustpoint. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 280: Delete Certificate
The following example shows how to force the deletion of the identity certificate. switch(config-trustpoint)# delete certificate force Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 281 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description delete ca-certificate Deletes the certificate authority certificate. delete crl Deletes the crl from the trustpoint. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 282: Delete Crl
Related Commands Command Description delete ca-certificate Deletes the certificate authority certificate. delete certificate Deletes the identity certificate. Cisco MDS 9000 Family Command Reference 5-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 283: Deny (Ipv6-Acl Configuration)
Applies the ACL to the specified destination IPv6 host address. The format is X:X:X::X. log-deny For packets that are dropped, creates an informational log message about the packet that matches the entry. The message includes the input interface. Cisco MDS 9000 Family Command Reference 5-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 284 This command was introduced. Usage Guidelines The following guidelines can assist you in configuring an IPv6-ACL. For complete information, refer to the Cisco MDS 9000 Family CLI Configuration Guide. You can apply IPv6-ACLs to VSAN interfaces, the management interface, Gigabit Ethernet •...
Page 285 List1 Related Commands Command Description ipv6 access-list Configures an IPv6 ACL and enters IPv6-ACL configuration submode. permit Configures permit conditions for an IPv6 ACL. Cisco MDS 9000 Family Command Reference 5-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 286: Destination Interface
1 Session 1 (inactive as destination is down) Destination is fc3/13 No session filters configured No ingress (rx) sources No egress (tx) sources switch(config-span)# Cisco MDS 9000 Family Command Reference 5-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 287 Selects or configures the SPAN session and changes to SPAN configuration submode. source Configures a SPAN source. suspend Suspends a SPAN session. show span session Displays specific information about a SPAN session Cisco MDS 9000 Family Command Reference 5-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 288: Destination-Profile
| rmon | supervisor-hardware | syslog-group-port | system | test} no destination-profile {profile-name | full-txt-destination | short-txt-destination | xml-destination} {alert-group {all | avanti | cisco-tac | environmental | inventory | license | linecard-hardware | rmon | supervisor-hardware | syslog-group-port | system | test}...
Page 289 Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 5-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 290: Device-Alias (Ivr Fcdomain Database Configuration Submode)
Creates IVR persistent FC IDs. autonomous-fabric-num native-autonomous-fabric-num Creates an IVR persistent FC ID database entry. show ivr fcdomain database Displays IVR fcdomain database entry information. Cisco MDS 9000 Family Command Reference 5-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 291: Device-Alias (Sdv Virtual Device Configuration Submode)
1 switch(config-sdv-virt-dev)# device-alias group1 primary Related Commands Command Description sdv enable Enables or disables SAN device virtualization. show sdv statistics Displays SAN device virtualization statistics. Cisco MDS 9000 Family Command Reference 5-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 292: Device-Alias Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m device-alias abort To discard a Distributed Device Alias Services (device alias) Cisco Fabric Services (CFS) distribution session in progress, use the device-alias abort command in configuration mode.
Page 293: Device-Alias Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m device-alias commit To apply the pending configuration pertaining to the Distributed Device Alias Services (device alias) Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the device-alias commit command in configuration mode. device-alias commit Syntax Description This command has no other arguments or keywords.
Page 294: Device-Alias Database
Related Commands Command Description device-alias commit Commits changes to the temporary device alias database to the active device alias database. show device-alias Displays device alias database information. Cisco MDS 9000 Family Command Reference 5-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 295: Device-Alias Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m device-alias distribute To enable Cisco Fabric Services (CFS) distribution for Distributed Device Alias Services (device alias), use the device-alias distribute command. To disable this feature, use the no form of the command.
Page 296: Device-Alias Import Fcalias
Command Description device-alias database Configures and activates the device alias database. device-alias distribute Distributes fcalias database changes to the fabric. show device-alias Displays device alias database information. Cisco MDS 9000 Family Command Reference 5-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 297: Device-Alias Name
Device1 pwwn 21:00:00:20:37:6f:db:bb Related Commands Command Description device-alias database Enters device alias database configuration submode. show device-alias Displays device alias database information. Cisco MDS 9000 Family Command Reference 5-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 298: Dir
The default file system is specified by the cd command. Command Modes EXEC mode. Command History Release Modification 1.2(1) This command was introduced. 2.1(1a) Added debug, log, and modflash keywords. Usage Guidelines None. Cisco MDS 9000 Family Command Reference 5-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 299 174518272 bytes free 209715200 bytes total switch# Related Commands Command Description Changes the default directory or file system. delete Deletes a file on a Flash memory device. Cisco MDS 9000 Family Command Reference 5-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 300: Disable
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 5-28 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 301: Discover Custom-List
1 fcid 0X123456 The following example deletes the specified VSAN and FCID from the customized list. switch# discover custom-list delete vsan 1 fcid 0X123456 Cisco MDS 9000 Family Command Reference 5-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 302: Discover Scsi-Target
FC4 Type = SCSI_FCP. Examples The following example shows how to discover local targets assigned to all OSs. switch# discover scsi-target local os all discovery started Cisco MDS 9000 Family Command Reference 5-30 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 303 PRLI RSP: 0x01 SPARM: 0x0012... The following example begins discovering targets from a customized list assigned to the Linux operating system. switch# discover scsi-target custom-list os linux discovery started Cisco MDS 9000 Family Command Reference 5-31 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 304: Distribute
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 5-32 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 305 Examples The following example disables the terminal session-timeout command using the do command in configuration mode. switch(config)# do terminal session-timeout 0 switch(config)# Cisco MDS 9000 Family Command Reference 5-33 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 306 69458 frames output, 3086812 bytes 0 discards, 0 errors 2 input OLS, 1 LRR, 0 NOS, 2 loop inits 1 output OLS, 1 LRR, 1 NOS, 1 loop inits Cisco MDS 9000 Family Command Reference 5-34 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 307: Dpvm Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m dpvm abort To discard a dynamic port VSAN membership (DPVM) Cisco Fabric Services (CFS) distribution session in progress, use the dpvm abort command in configuration mode.
Page 308: Dpvm Activate
Related Commands Command Description dpvm database Configures the DPVM database. dpvm enable Enables DPVM. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 5-36 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 309: Dpvm Auto-Learn
Autolearn entries do not override previously configured activate entries. • Examples The following example shows how to enable autolearning for the DPVM database. switch# config terminal switch(config)# dpvm auto-learn Cisco MDS 9000 Family Command Reference 5-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 310 The following example shows how to disable autolearning for the DPVM database. switch# config terminal switch(config)# no dpvm auto-learn Related Commands Command Description dpvm enable Enables DPVM. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 5-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 311: Dpvm Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m dpvm commit To apply the pending configuration pertaining to the dynamic port VSAN membership (DPVM) Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the dpvm commit command.
Page 312: Dpvm Database
Adds entries to the DPVM database using the nWWN. configuration submode) pwwn (DPVM database Adds entries to the DPVM database using the pWWN. configuration submode) show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 5-40 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 313: Dpvm Database Copy Active
The following example shows how to copy the active DPVM database to the config DPVM database. switch# dpvm database copy active Related Commands Command Description dpvm enable Enables DPVM. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 5-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 314: Dpvm Database Diff
Legend: “+” New Entry, “-” Missing Entry, “*” Possible Conflict Entry --------------------------------------------------------------------- - pwwn 44:22:33:44:55:66:77:88 vsan 44 * pwwn 11:22:33:44:55:66:77:88 vsan 11 Cisco MDS 9000 Family Command Reference 5-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 315 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description dpvm enable Enables DPVM. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 5-43 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 316: Dpvm Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m dpvm distribute To enable Cisco Fabric Services (CFS) distribution for dynamic port VSAN membership (DPVM), use the dpvm distribute command. To disable this feature, use the no form of the command.
Page 317: Dpvm Enable
Related Commands Command Description dpvm activate Activates the DPVM database. dpvm database Configures the DPVM database. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 5-45 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 318: Dscp
Configures a QoS class map. qos policy-map Configure a QoS policy map. class Configure a QoS policy map class. show qos Displays the current QoS settings. Cisco MDS 9000 Family Command Reference 5-46 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 319: Duplicate-Message Throttle
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 5-47 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 320 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 5-48 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 321: Chapter 6 Debug Commands
C H A P T E R Debug Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All debug commands are issued in EXEC mode and are shown here in alphabetical order. For more information, refer to the Cisco MDS 9000 Family Troubleshooting Guide and the Cisco MDS 9000 Family System Messages Guide.
Page 322: Debug Aaa
Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Nov 20 06:29:58 aaa: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 323 Related Commands Command Description aaa authentication Configures the authentication mode for a login. login no debug all Disables all debugging. show aaa Displays the configured authentication methods. authentication Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 324: Debug All
The following example displays the system output when the debug all command is issued: switch# debug all Related Commands Command Description show debug Displays the debug commands configured on the switch. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 325: Debug Biosd
Examples The following example displays the system output when the debug biosd command is issued: switch# debug biosd Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 326: Debug Bootvar
The following example displays the system output when the debug bootvar all command is issued: bootvar switch# debug Related Commands Command Description debug all Enables debugging for all features on the switch. show boot Displays the boot variables or modules. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 327: Debug Callhome
Call Home event traces and a dump of the messaging and transaction service (MTS) messages that the Call Home function receives. Note The debug Call Home function displays event traces for both successful and unsuccessful Call Home e-mail transmissions. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 328 Entering function do_event_correlation 2005 Mar 9 05:37:21 callhome: getting dest profiles for alert group test 2005 Mar 9 05:37:21 callhome: getting dest profiles for alert group cisco-tac 2005 Mar 9 05:37:21 callhome: Applying the event rule for destination profile full_txt 2005 Mar...
Page 329: Debug Cert-Enroll
Enables debugging for the certification enroll request. request-lowlevel Enables low-level debugging for the certification enroll request. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 3.0(1) This command was introduced. Usage Guidelines None. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 330 2006 Jan 21 00:44:52.876991 cert_enroll: cert_en_enable_info_config: exiting for Cert-enroll Daemon debug... Related Commands Command Description no debug all Disables all debugging. show crypto ca Displays configured trust point certificates. certificates Cisco MDS 9000 Family Command Reference 6-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 331: Debug Cdp
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m debug cdp To enable debugging for the Cisco Discovery Protocol (CDP) function, use the debug cdp command in EXEC mode. To disable a debug command use the no form of the command or use the no debug all command to turn off all debugging.
Page 332 8 21:23:35 cdp: Sent CDP packet, interface 0x2382000 Related Commands Command Description no debug all Disables all debugging. show cdp Displays CDP parameters configured globally or for a specific interface. Cisco MDS 9000 Family Command Reference 6-12 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 333: Debug Cfs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m debug cfs To enable debugging for Cisco Fabric Services (CFS), use the debug cfs command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging.
Page 334: Debug Cfs
The following example displays the system output when the debug cfs all command is issued. switch# debug cfs all Related Commands Command Description no debug all Disables all debugging. show cfs Displays CFS information. Cisco MDS 9000 Family Command Reference 6-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 335: Debug Cimserver
2004 Mar 29 20:05:22 cimsrvprov: cim_mts_dispatch(): Opcode is 182 Related Commands Command Description no debug all Disables all debugging. show cimserver Displays the CIM configurations and settings. Cisco MDS 9000 Family Command Reference 6-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 336: Debug Cloud
Enables debugging of the cloud detailed trace. warning Enables debugging of cloud warnings. xipc Enables debugging of XIPC messages. xipc Enables debugging of cloud data serialization. Defaults None. Command Modes EXEC mode. Cisco MDS 9000 Family Command Reference 6-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 337 Related Commands Command Description no debug all Disables all debugging. show cloud discovery Displays cloud discovery information. show cloud membership Displays information about members of the cloud. Cisco MDS 9000 Family Command Reference 6-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 338: Debug Core
Related Commands Command Description no debug all Disables all debugging. show cores Displays all the cores presently available for upload from active sup. Cisco MDS 9000 Family Command Reference 6-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 339: Debug Device-Alias
This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug device-alias all command is issued. switch# debug device-alias all Cisco MDS 9000 Family Command Reference 6-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 340 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show device-alias Displays device alias information. Cisco MDS 9000 Family Command Reference 6-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 341: Debug Dpvm
{all | cfs-events | change-events | db-events | errors | ftrace | merge-event | mts-events | pss-events | session-events | snmp-events | sys-events} Syntax Description Enables debugging for all DPVM. cfs-events Enables debugging for Cisco Fabric Services (CFS). change-events Enables debugging for change events. db-events Enables debugging for database events.
Page 342 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 6-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 343: Debug Dstats
The following example displays the system output when the debug dstats flow command is issued: switch# debug dstats flow Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 344: Debug Ethport
1981 May 5 07:28:59 ethport: fu_fsm_execute_all: match_msg_id(0), log_already_open(0) 1981 May 5 07:28:59 ethport: fu_fsm_execute_all: null fsm_event_list 1981 May 5 07:28:59 ethport: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 52343) dropped Cisco MDS 9000 Family Command Reference 6-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 345: Debug Ethport
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 346: Debug Exceptionlog
The following example displays the system output when the debug exceptionlog command is issued: switch# debug exceptionlog 7), credit(3), empty Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 347: Debug Fabric-Binding
This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug fabric-binding all command is issued: switch# debug fabric-binding all Cisco MDS 9000 Family Command Reference 6-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 348 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show fabric-binding Displays configured fabric binding information. Cisco MDS 9000 Family Command Reference 6-28 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 349: Debug Fc-Tunnel
Specifies the opcode for the packets in the receive direction. Specifies the sap for the packets in the receive direction. range Specifies the integer range from 1 to 4096. Defaults Disabled. Command Modes EXEC mode. Cisco MDS 9000 Family Command Reference 6-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 350 The following example displays the system output when the debug fc-tunnel all command is issued: switch# debug fc-tunnel all Related Commands Command Description no debug all Disables all debugging. show fc-tunnel Display configured FC tunnel information. Cisco MDS 9000 Family Command Reference 6-30 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 351: Debug Fc2
[fcid fcid [interface {fc slot/port | fcip port} | vsan vsan-id [interface {fc slot/port | fcip port}]] | interface {fc slot/port | fcip port} | vsan vsan-id [interface {fc slot/port | fcip port}]]} Cisco MDS 9000 Family Command Reference 6-31 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 352 If FSPF receives a bad FC2 packet analyze the output of the debug fc2 pkt command. Examples The following example displays the system output when the debug fc2 error vsan 1 command is issued: switch1# debug fc2 error vsan 1 Cisco MDS 9000 Family Command Reference 6-32 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 353 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show fc2 Displays FC2 information. Cisco MDS 9000 Family Command Reference 6-33 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 354: Debug Fc2D
2004 Mar 29 22:57:25 fc2d: fu_fsm_execute_all: match_msg_id(0), log_already_open (0) 2004 Mar 29 22:57:25 fc2d: fu_fsm_execute_all: null fsm_event_list 2004 Mar 29 22:57:25 fc2d: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_ DEBUG_WRAP_MSG(msg_id 6894921) dropped Cisco MDS 9000 Family Command Reference 6-34 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 355: Debug Fc2D
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description debug all Enables debugging for the FC2 feature. no debug all Disables all debugging. show fc2 Displays FC2 information. Cisco MDS 9000 Family Command Reference 6-35 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 356: Debug Fcc
Specifies the integer range from 1 to 4096. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 1.0(2) This command was introduced. Usage Guidelines None. Cisco MDS 9000 Family Command Reference 6-36 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 357 The following example displays the system output when the debug fcc all command is issued: switch# debug fcc all Related Commands Command Description no debug all Disables all debugging. show fcc Displays FCC settings. Cisco MDS 9000 Family Command Reference 6-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 358: Debug Fcdomain
Enables debugging of memory operations. notify Enables debugging of notifications phase Enables debugging of global phases Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 1.0(2) This command was introduced. Cisco MDS 9000 Family Command Reference 6-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 359 8 20:44:38 fcdomain: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Related Commands Command Description show fcdomain domain-list Displays current domains in the fabric. fcdomain Enables fcdomain features. Cisco MDS 9000 Family Command Reference 6-39 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 360: Debug Fcfwd
This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug fcfwd error command is issued: switch# debug fcfwd error Cisco MDS 9000 Family Command Reference 6-40 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 361 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show fcfwd Displays the configured fcfwd tables and statistics. Cisco MDS 9000 Family Command Reference 6-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 362: Debug Fcns
Feb 17 04:42:54 fcns: vsan 99: Got Entry for port-id 27800 Feb 17 04:42:54 fcns: vsan 99: Registered port-name 36a4078be0000021 for port-id 780200 Feb 17 04:42:54 fcns: vsan 99: Registered node-name 36a4078be0000020 for port-id 780200 Cisco MDS 9000 Family Command Reference 6-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 363: Debug Fcns
Displays the results of the discovery or the name server database for a specified VSAN or for all VSANs. show fcns statistics Displays the statistical information for a specified VSAN or for all VSANs. Cisco MDS 9000 Family Command Reference 6-43 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 364: Debug Fcs
This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug fcs all command is issued: switch# debug fcs all Cisco MDS 9000 Family Command Reference 6-44 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 365 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show fcs Displays the status of the fabric configuration. Cisco MDS 9000 Family Command Reference 6-45 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 366: Debug Fcsp-Mgr
Sets debug level to notify. trace Enables debugging of FC-SP function enter/exit. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 1.3(2) This command was introduced. Cisco MDS 9000 Family Command Reference 6-46 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 367 2004 Mar 29 23:33:56 fcsp-mgr: fu_fsm_engine_post_event_processing: mts msg MTS_ OPC_DEBUG_WRAP_MSG(msg_id 7061762) dropped Related Commands Command Description no debug all Disables all debugging. show fcsp Displays the status of the FC-SP configuration Cisco MDS 9000 Family Command Reference 6-47 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 368: Debug Fdmi
Enables debugging for FDMI PSSs. trace Restricts debugging for FDMI traces. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 1.3(2) This command was introduced. Usage Guidelines None. Cisco MDS 9000 Family Command Reference 6-48 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 369 140 [REQ] Opc: 7804 (MTS_OPC_FDMI_SNMP) RR: 0x0069E217 HA_SEQNO: 0x00000000 0x25218CC5A40E3 REJ:0 SYNC:0 Related Commands Command Description no debug all Disables all debugging. show fdmi Displays the FDMI database information. Cisco MDS 9000 Family Command Reference 6-49 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 370: Debug Ficon
Configure debugging of SB3 library. trace Configure debugging of FICON control device trace. warning Configure debugging of FICON control device warning. error Enables debugging for FICON errors. Cisco MDS 9000 Family Command Reference 6-50 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 371 2005 Mar 10 02:38:58 ficon: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 6943776) dropped switch# undebug all Related Commands Command Description no debug all Disables all debugging. show ficon Displays configured FICON information. Cisco MDS 9000 Family Command Reference 6-51 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 372: Debug Flogi
Enables debugging for FLOGI traces. warning Enables debugging for FLOGI warnings. interface type number Restricts debugging to the specified interface. vsan vsan-id Restricts debugging to the specified VSAN. Cisco MDS 9000 Family Command Reference 6-52 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 373: Debug Flogi
Apr 10 00:42:36 flogi: fs_clear_all_outstanding_responses_for_flogi: FLOGI FREE( a07e00300500252b) refcnt:3 Related Commands Command Description no debug all Disables all debugging. show flogi database Displays all the FLOGI sessions through all interfaces across all VSANs. Cisco MDS 9000 Family Command Reference 6-53 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 374: Debug Fm
2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Get feature (1) op request 2005 Mar 10 02:40:19 feature-mgr: fm_handle_cmi_get_feature_op: Reply to get feature ivr op request: op 2, op_state 0, result 0x0 (success) Cisco MDS 9000 Family Command Reference 6-54 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 375 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-55 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 376: Debug Fspf
Enables debugging of PortChannel packets and headers. sup-fc Enables debugging of inband Interface. Enables debugging for FCC tx/rx FCC packets. both Specifies debugging in both the transmit and receive directions. Cisco MDS 9000 Family Command Reference 6-56 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 377: Debug Fspf
If you receive an error in processing due to a wrong MTS message, use the debug fspf mts pkt and debug fspf error commands. If you receive an error when interacting with RIB, use the debug fspf route command along with the RIB debug traces. Cisco MDS 9000 Family Command Reference 6-57 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 378 Apr 5 11:50:04 fspf: Error in processing hello packet , error code = 4 Related Commands Command Description no debug all Disables all debugging. show fspf Displays global FSPF information. Cisco MDS 9000 Family Command Reference 6-58 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 379: Debug Hardware Arbiter
1 Related Commands Command Description no debug all Disables all debugging. show hardware Displays switch hardware inventory details. Cisco MDS 9000 Family Command Reference 6-59 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 380: Debug Idehsd
The following example displays the system output when the debug idehsd cmd dbglevel command is issued: switch# debug idehsd cmd dbglevel 5 set debug level to 5 succeeded Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-60 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 381: Debug Ike
The following example displays the system output when the debug ike all command is issued. switch# debug ike all Related Commands Command Description no debug all Disables all debugging. show crypto ike Displays IKE protocol information. domain ipsec Cisco MDS 9000 Family Command Reference 6-61 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 382: Debug Ilc_Helper
The following example displays the system output when the debug ilc_helper all command is issued: switch# debug ilc_helper all For Application :125, sdwrap:mts_send : Broken pipe Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-62 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 383: Debug Ipacl
Related Commands Command Description no debug all Disables all debugging. show ip access-list Displays the IP access control lists that are currently active. Cisco MDS 9000 Family Command Reference 6-63 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 384: Debug Ipconf
2005 Mar 10 02:45:30 ipconf: MTS message received opcode 862 source 0x00000601/27 2005 Mar 10 02:45:30 ipconf: Getting ip addresses on interface 5000000 Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-64 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 385: Debug Ipfc
The following example displays the system output when the debug ipfc kernel errors command is issued: switch# debug ipfc kernel errors Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-65 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 386: Debug Ips
Enables debugging of the iSLB configuration. config-detail Enables detailed debugging of the iSLB configuration. flow Enables debugging for the iSLB flow. flow-detail Enables detailed debugging for the iSLB flow. Cisco MDS 9000 Family Command Reference 6-66 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 387 Trace Detail debugging is on Related Commands Command Description no debug all Disables all debugging. show ips stats Displays IP storage statistics. show ips status Displays the IP storage status. Cisco MDS 9000 Family Command Reference 6-67 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 388: Debug Ipsec
To use this command, IPsec must be enabled using the crypto ipsec enable command. Examples The following example displays the system output when the debug ipsec config command is issued. switch# debug ipsec config Cisco MDS 9000 Family Command Reference 6-68 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 389 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description crypto ipsec enable Enables IPsec. no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-69 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 390: Debug Isns
To use this command, iSNS must be enabled using the isns-server enable command. Examples The following example displays the system output when the debug isns error command is issued. switch# debug isns error Cisco MDS 9000 Family Command Reference 6-70 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 391: Debug Isns
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description isns-server enable Enables the iSNS server. no debug all Disables all debugging. show isns Displays iSNS information. Cisco MDS 9000 Family Command Reference 6-71 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 392: Debug Ivr
Enables debugging of IVR TU FSM. tu-fsm-detail Enables debugging of IVR TU FSM detail. zone-distrib-errors Enables debugging of IVR zone distribution errors. zone-distrib-events Enables debugging of IVR zone distribution events. Cisco MDS 9000 Family Command Reference 6-72 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 393 2005 Mar 10 01:27:27 ivr: fu_fsm_execute_all: null fsm_event_list 2005 Mar 10 01:27:27 ivr: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 6774251) dropped Related Commands Command Description no debug all Disables all debugging. show ivr Displays IVR configurations. Cisco MDS 9000 Family Command Reference 6-73 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 394: Debug Klm
Enables debugging for driver flow. warning Enables debugging for driver warnings. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 1.0(2) This command was introduced. Usage Guidelines None. Cisco MDS 9000 Family Command Reference 6-74 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 395: Debug Klm
The following example displays the system output when the debug klm scsi-target driver command is issued: switch# debug klm scsi-target driver Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-75 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 396: Debug License
The following example displays the system output when the debug license all command is issued: switch# debug license all Related Commands Command Description no debug all Disables all debugging. show license Displays license information. Cisco MDS 9000 Family Command Reference 6-76 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 397: Debug Logfile
The following example redirects the output of the debug commands to the file named sample. switch# debug logfile sample The following example assigns the log file size for the file named sample. switch# debug logfile sample size 410000 Cisco MDS 9000 Family Command Reference 6-77 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 398: Debug Logfile
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show logging Displays the current message logging configuration. Cisco MDS 9000 Family Command Reference 6-78 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 399: Debug Mcast
Specifies the integer range from 1 to 4096. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 1.0(2) This command was introduced. Usage Guidelines None. Cisco MDS 9000 Family Command Reference 6-79 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 400: Debug Mcast
The following example displays the system output when the debug mcast all command is issued: switch# debug mcast all Related Commands Command Description no debug all Disables all debugging. show mcast Displays multicast information. Cisco MDS 9000 Family Command Reference 6-80 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 401: Debug Mip
The following example displays the system output when the debug mip errors command is issued: switch# debug mip errors Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-81 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 402: Debug Module
2005 Mar 10 02:51:01 module: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 6986564) dropped Related Commands Command Description no debug all Disables all debugging. show module Displays the status of a module. Cisco MDS 9000 Family Command Reference 6-82 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 403: Debug Ntp
2005 Mar 10 03:00:42 ntp: Dropping msg_ref with rr_token [7002722] Related Commands Command Description no debug all Disables all debugging. show ntp Displays the configured NTP server and peer associations. Cisco MDS 9000 Family Command Reference 6-83 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 404: Debug Npv
External Interface FSM Trace debugging is on FLOGI FSM Events debugging is on FLOGI FSM Errors debugging is on FLOGI FSM Trace debugging is on Server Interface FSM Events debugging is on Cisco MDS 9000 Family Command Reference 6-84 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 405 Server Interface FSM Trace debugging is on Events debugging is on Related Commands Command Description show debug npv Displays the NPV debug commands configured on the switch. Cisco MDS 9000 Family Command Reference 6-85 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 406: Debug Obfl
2006 Jan 23 21:30:59.573503 obfl: obfl_process_mts_msgs(): OBFL received mts mes sage: opc:182 Related Commands Command Description no debug all Disables all debugging. show logging onboard Displays OBFL information. Cisco MDS 9000 Family Command Reference 6-86 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 407: Debug Platform
Enables debugging in the transmit direction, Enables debugging in the receive direction. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 1.0(2) This command was introduced. Usage Guidelines None. Cisco MDS 9000 Family Command Reference 6-87 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 408: Debug Platform
2005 Mar 10 03:01:59 platform: fu_priority_select: returning FU_PSEL_Q_CAT_FD queue, fd(7), usr_q_info(1) 2005 Mar 10 03:01:59 platform: fu_fsm_engine: line[2139] Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-88 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 409: Debug Plog
The following example displays the system output when the debug plog command is issued: switch# debug plog Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-89 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 410: Debug Port
Bypasses XBAR manager execution. zone_mgr Bypasses zone manager execution. interface type number Restricts debugging to the specified interface. module slot Restricts debugging to the specified module. Defaults Disabled. Cisco MDS 9000 Family Command Reference 6-90 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 411: Debug Port
- FU_PSEL_Q_CAT_FD, usr_q_info(32), fd(5), priority(3), credit(2), empty Apr 10 15:30:35 port: fu_priority_select: returning FU_PSEL_Q_CAT_MTS queue, fd(3), usr_q_info(8) Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-91 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 412: Debug Port-Channel
2005 Mar 10 03:03:26 port_channel: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 7005958) dropped Related Commands Command Description no debug all Disables all debugging. show port-channel Displays information about existing PortChannel configurations. Cisco MDS 9000 Family Command Reference 6-92 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 413: Debug Port-Resources
_info(2), priority(7), credit(6), empty 2006 Jan 19 22:10:59.245051 port-resources: fu_priority_select: returning FU_PSE L_Q_CAT_MTS queue, fd(5), usr_q_info(1) 2006 Jan 19 22:10:59.245168 port-resources: prm_get_data_from_queue(664): dequeued mts msg (128136), MTS_OPC_DEBUG_WRAP_MSG Cisco MDS 9000 Family Command Reference 6-93 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 414 MTS_OPC_DEBUG_WRAP_MSG(msg_id 128136) dropped Related Commands Command Description no debug all Disables all debugging. show port-resources Displays information about port resources in a Generation 2 module. module Cisco MDS 9000 Family Command Reference 6-94 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 415: Debug Qos
Related Commands Command Description no debug all Disables all debugging. show qos Displays the current QoS settings along with a the number of frames marked high priority. Cisco MDS 9000 Family Command Reference 6-95 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 416: Debug Radius
Nov 20 06:36:42 radius: radius_new_debug_conf_open: exiting Nov 20 06:36:42 radius: radius_new_enable_info_config: SET_REQ for Radius Daemon debug with 1 Nov 20 06:36:42 radius: radius_new_enable_info_config: SET_REQ done for Radius Daemon debug with 1 Cisco MDS 9000 Family Command Reference 6-96 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 417: Debug Radius
Nov 20 06:36:42 radius: radius_new_enable_info_config: exiting for Radius Daemon debug Related Commands Command Description no debug all Disables all debugging. show radius Displays the RADIUS Cisco Fabric Services (CFS) distribution status and other details. Cisco MDS 9000 Family Command Reference 6-97 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 418: Debug Rd-Reg
The following example displays the system output when the debug rd-reg abc command is issued: switch# debug rd-reg abc Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-98 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 419: Debug Rdl Errors
The following example displays the system output when the debug rdl errors command is issued: switch# debug rdl errors Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-99 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 420: Debug Rib
If a RIB operation is ignored or not supported, then issue the debug rib all command to find out more details. Examples The following example shows the debug rib error command. switch# debug rib error Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-100 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 421: Debug Rlir
Command Description no debug all Disables all debugging. show rlir Displays information about RLIR, Link Incident Record Registration (LIRR), and Distribute Registered Link Incident Record (DRLIR) frames. Cisco MDS 9000 Family Command Reference 6-101 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 422: Debug Rscn
The following example displays the system output when the debug rscn errors command is issued: switch# debug rscn errors Related Commands Command Description no debug all Disables all debugging. show rscn Displays RSCN information. Cisco MDS 9000 Family Command Reference 6-102 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 423: Debug San-Ext-Tuner
This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug san-ext-tuner error command is issued. switch# debug san-ext-tuner error Cisco MDS 9000 Family Command Reference 6-103 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 424 Related Commands Command Description isns-server enable Enables the iSNS server. no debug all Disables all debugging. show isns Displays iSNS information. show san-ext-tuner Displays SAN extension tuner information. Cisco MDS 9000 Family Command Reference 6-104 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 425: Debug Scsi-Flow
2004 Nov 29 17:24:49 sfm: fu_fsm_execute_all: match_msg_id(0), log_already_open(0) 2004 Nov 29 17:24:49 sfm: fu_fsm_execute_all: null fsm_event_list 2004 Nov 29 17:24:49 sfm: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 536440) dropped switch# Cisco MDS 9000 Family Command Reference 6-105 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 426 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show scsi-flow Displays SCSI flow information. Cisco MDS 9000 Family Command Reference 6-106 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 427: Debug Scsi-Target
Apr 28 21:11:54 vhbad: vhbad_handle_timeout: timer:1 context:(nil) Apr 28 21:12:06 vhbad: vhba_mts_handler: sysmgr_dispatch: retval:-1 Related Commands Command Description no debug all Disables all debugging. show scsi-target Displays information about existing SCSI target configurations. Cisco MDS 9000 Family Command Reference 6-107 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 428: Debug Sdv
Enables the Virtual Domain debugs. zone-activation Enables the ZS-ACTV debugs. Defaults Disabled. Command Modes EXEC mode. Command History Release Modification 3.1(2) This command was introduced. Usage Guidelines None. Cisco MDS 9000 Family Command Reference 6-108 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 429 2007 Jan 26 22:17:25.232233 sdv: fu_fsm_engine_post_event_processing: mts msg MTS_OPC_DEBUG_WRAP_MSG(msg_id 83409) dropped Related Commands Command Description sdv enable Enables or disables SAN device virtualization. show sdv statistics Displays SAN device virtualization statistics. Cisco MDS 9000 Family Command Reference 6-109 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 430: Debug Security
5 00:51:13 securityd: got back the return value of global radius configuration operation:success 5 00:51:13 securityd: closing RADIUS pss configuration 5 00:51:13 securityd: opening radius configuration for group:default Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-110 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 431: Debug Sensor
The following example displays the system output when the debug sensor info command is issued: switch# debug sensor info Related Commands Command Description no debug all Disables all debugging. show environment temperature Displays current temperature threshold settings and state. Cisco MDS 9000 Family Command Reference 6-111 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 432: Debug Snmp
Specifies the integer range from 1 to 4095. trace-entryexit Specifies trace-level entry or exit debug output. trace-stub Specifies trace-level stub debug output. Defaults Disabled. Command Modes EXEC mode. Cisco MDS 9000 Family Command Reference 6-112 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 433 Displays SNMP status and setting information. snmp-server Configures the SNMP server information, switch location, and switch name. snmp-server enable Enables SNMP server notifications (informs and traps). traps Cisco MDS 9000 Family Command Reference 6-113 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 434: Debug Span
- FU_PSEL_Q_CAT_CQ, usr_q_info(4), priority(7), credit(6), empty Apr 29 16:06:48 span: fu_priority_select: returning FU_PSEL_Q_CAT_MTS queue, fd(3), usr_q_info(2) Apr 29 16:06:48 span: span_get_data_from_mts_q dequeued mts msg (26e525), MTS_OPC_DEBUG_WRAP_MSG Cisco MDS 9000 Family Command Reference 6-114 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 435: Debug Span
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show span session Displays specific information about a Switched Port Analyzer (SPAN) session. Cisco MDS 9000 Family Command Reference 6-115 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 436: Debug System Health
Enables debugging of system health SerDes tests. special Enables debugging of system health special. trace Enables debugging of health monitoring trace flags. xipc Enables debugging of system health XIPC. Defaults Disabled. Cisco MDS 9000 Family Command Reference 6-116 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 437 2005 Mar 10 01:49:28 SystemHealth: fu_fsm_execute_all: match_msg_id(0), log_already_open(0) Related Commands Command Description no debug all Disables all debugging. show system health Displays configured Online Health Management System (OHMS) information. Cisco MDS 9000 Family Command Reference 6-117 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 438: Debug Tacacs
Nov 20 06:39:44 tacacs: tacacs_debug_conf_open: exiting Nov 20 06:39:44 tacacs: tacacs_enable_info_config: SET_REQ for TACACS+ Daemon debug with 1 Nov 20 06:39:44 tacacs: tacacs_enable_info_config: SET_REQ done for TACACS+ Daemon debug with 1 Cisco MDS 9000 Family Command Reference 6-118 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 439 Nov 20 06:39:44 tacacs: tacacs_enable_info_config: exiting for TACACS+ Daemon debug Related Commands Command Description no debug all Disables all debugging. show tacacs+ Displays the TACACS+ Cisco Fabric Services (CFS) distribution status and other details. Cisco MDS 9000 Family Command Reference 6-119 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 440: Debug Tcap
The following example displays the system output when the debug tcap demux command is issued: switch# debug tcap demux Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-120 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 441: Debug Tlport
The following example displays the system output when the debug tlport events pss command is issued: switch# debug tlport events pss Related Commands Command Description no debug all Disables all debugging. show tlport Displays configured TL port information. Cisco MDS 9000 Family Command Reference 6-121 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 442: Debug Ttyd
The following example displays the system output when the debug ttyd events command is issued: switch# debug ttyd events Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-122 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 443: Debug Vni
Apr 29 17:00:59 vni: Received MTS message Apr 29 17:00:59 vni: message not processed by system mgr library , so process it normal Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-123 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 444: Debug Vrrp
Apr 29 17:35:58 vrrp_eng: fu_priority_select: returning FU_PSEL_Q_CAT_FD queue, fd(7), usr_q_info(3) Apr 29 17:35:58 vrrp_eng: heartbeat sent Apr 29 17:35:58 vrrp_eng: message not processed by system mgr library , so process it normal way Cisco MDS 9000 Family Command Reference 6-124 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 445: Debug Vrrp
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show vrrp Displays VRRP configuration information. Cisco MDS 9000 Family Command Reference 6-125 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 446: Debug Vsan
2005 Mar 10 01:44:35 vsan: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 2005 Mar 10 01:44:35 vsan: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF Cisco MDS 9000 Family Command Reference 6-126...
Page 447: Debug Vsan
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description no debug all Disables all debugging. show vsan Displays information about configured VSANs. Cisco MDS 9000 Family Command Reference 6-127 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 448: Debug Wr-Reg
The following example displays the system output when the debug wr-reg command is issued: switch# debug wr-reg Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-128 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 449: Debug Wwn
Apr 29 19:24:17 wwn: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Apr 29 19:24:17 wwn: 00 00 00 00 00 00 00 00 2E 00 00 00 Cisco MDS 9000 Family Command Reference 6-129...
Page 450 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Apr 29 19:24:17 wwn: 53601-wwnm_unmask_sigalrm:1261 TRACE: FILE=_manager/wwnm/wwnm_utilities.c Related Commands Command Description no debug all Disables all debugging. show wwn Displays the status of the WWN configuration. Cisco MDS 9000 Family Command Reference 6-130 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 451: Debug Xbar
Apr 29 19:48:34 xbar: fu_fsm_engine: (Error) SYSERR_FU_xx: 0x10, err_num (16) in demux Apr 29 19:48:34 xbar: fu_fsm_execute_all: match_msg_id(0), log_already_open(0) Apr 29 19:48:34 xbar: fu_fsm_execute_all: null fsm_event_list Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-131 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 452: Debug Xbar_Driver
2006 Jan 23 22:06:41.780356 xbar_driver: sc_stats_timer_hdlr called 2006 Jan 23 22:07:41.780359 xbar_driver: sc_stats_timer_hdlr called 2006 Jan 23 22:08:41.790341 xbar_driver: sc_stats_timer_hdlr called... Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-132 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 453: Debug Xbc
The following example displays the system output when the debug xbc init command is issued: switch# debug xbc init Related Commands Command Description no debug all Disables all debugging. Cisco MDS 9000 Family Command Reference 6-133 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 454: Debug Zone
Enables debugging for MTS notification messages. Enables debugging for PSS debug messages read-only-zoning Enables debugging for read-only Zoning messages. tcam Enables debugging for TCAM messages. transit Enables debugging for transit frame messages. Cisco MDS 9000 Family Command Reference 6-134 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 455 2005 Mar 10 01:46:36 zone: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Related Commands Command Description no debug all Disables all debugging. show zone Displays zone information. Cisco MDS 9000 Family Command Reference 6-135 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 456 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 6-136 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 457: E Commands
C H A P T E R E Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 458: Email-Contact
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 459: Enable
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 460: Encryption
Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. policy Configures IKE policy parameters. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 461: End
EXEC mode. switch(config)# hostname george george(config)# end switch# Related Commands Command Description exit Exits configuration mode, or any of the configuration modes. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 462: Enrollment Terminal
The following example shows how to discard a trust point enrollment through the switch console. switch(config)# crypto ca trustpoint admin-ca switch(config-trustpoint)# no enrollment terminal Related Commands Command Description crypto ca authenticate Authenticates the certificate of the certificate authority. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 463: Exit
The following example displays an exit from the interface configuration mode to return to the configuration mode. switch(config-if)# exit switch(config)# The following example shows how to exit an active session (log-out). switch# exit Related Commands Command Description Returns you to EXEC mode. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 464 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference...
Page 465: F Commands
C H A P T E R F Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 466: Fabric-Binding Activate
3 force The following example reverts to the previously-configured state or to the factory default (if no state is configured) switch(config)# no fabric-binding activate vsan 1 force Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 467 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description fabric-binding database Configures a fabric-binding database. fabric-binding enable Enables fabric-binding. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 468: Fabric-Binding Database Copy
The following example copies from the active database to the config database in VSAN 1. switch# fabric-binding database copy vsan 1 Related Commands Command Description fabric-binding diff Provides the differences between the fabric-binding databases. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 469: Fabric-Binding Database Diff
The following example displays information on the differences between the configuration database and the active database. switch# fabric-binding database diff config vsan 1 Related Commands Command Description fabric-binding copy Copies from the active to the config fabric binding database. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 470: Fabric-Binding Database Vsan
FICON VSANs where the domains are statically configured and the end devices reject a domain ID change in all switches in the fabric. All switches in a non-FICON VSAN must be running Cisco MDS SAN-OS Release 3.x or later. Note Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 471 The following example deletes the sWWN and domain ID of a switch from the configured database list. switch# config terminal switch(config)# fabric-binding database vsan 5 switch(config-fabric-binding)# no swwn 21:00:15:30:23:1a:11:03 domain 101 Related Commands Command Description fabric-binding activate Activates fabric-binding. fabric-binding enable Enables fabric-binding. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 472: Fabric-Binding Enable
The following example disables fabric binding on that switch. switch# config t switch(config)# no fabric-binding enable Related Commands Command Description fabric-binding activate Activates fabric-binding. fabric-binding database Configures a fabric-binding database. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 473: Fcalias Clone
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# fcalias clone origAlias cloneAlias vsan 45 Related Commands Command Description show fcalias Displays the member name information in a Fibre Channel alias (fcalias). Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 474: Fcalias Name
The following examples show how to configure an fcalias called AliasSample on VSAN 3. switch# config terminal switch(config)# fcalias name AliasSample vsan 3 switch(config-fcalias)# Related Commands Command Description member (fcalias Configures alias member for a specified zone. configuration mode) Cisco MDS 9000 Family Command Reference 8-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 475: Fcalias Rename
The following example shows how to rename an fcalias. switch# config terminal switch(config)# fcalias rename oldalias newalias vsan 10 Related Commands Command Description fcalias name Configures fcalias names. show fcalias Displays fcalias information. Cisco MDS 9000 Family Command Reference 8-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 476: Fcanalyzer
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m fcanalyzer To configure the Cisco Fabric Analyzer use the fcanalyzer command in configuration mode. fcanalyzer {local [brief] [display-filter expression] [limit-captured-frames number]...
Page 477 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Examples The following examples shows how to configure the Cisco Fabric Analyzer. switch# config terminal...
Page 478: Fcc Enable
1.0(2) This command was introduced. Usage Guidelines This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter. Examples The following example shows how to enable FCC.
Page 479: Fcc Priority
Usage Guidelines FCC reduces the congestion in the traffic without interfering with standard Fibre Channel protocol. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 480: Fcdomain
Enables a domain manager fast restart on a specified VSAN. priority value Specifies the FC domain priority. The range is 1 to 254. restart Starts a disruptive or nondisruptive reconfiguration. disruptive Forces the disruptive fabric reconfiguration. Cisco MDS 9000 Family Command Reference 8-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 481 1030 switch(config)# fcdomain fabric-name 20:1:ac:16:5e:0:21:01 vsan 3 switch(config)# no fcdomain fabric-name 20:1:ac:16:5e:0:21:01 vsan 3010 switch(config)# fcdomain allowed 50-110 vsan 4 switch(config)# no fcdomain allowed 50-110 vsan 5 Cisco MDS 9000 Family Command Reference 8-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 482 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show fcdomain Displays global information about the FC domain configurations. Cisco MDS 9000 Family Command Reference 8-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 483: Fcdomain Abort Vsan
Description fcdomain Configures Fibre Channel domain features. fcdomain commit vsan Commits cached data and releases the lock. show fcdomain Displays global information about the FC domain configurations. Cisco MDS 9000 Family Command Reference 8-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 484: Fcdomain Commit Vsan
Configures Fibre Channel domain features. fcdomain abort vsan Flushes cached data without committing and releases the lock. show fcdomain Displays global information about the FC domain configurations. Cisco MDS 9000 Family Command Reference 8-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 485: Fcdomain Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m fcdomain distribute To enable fabric distribution using Cisco Fabric Services (CFS), use the fcdomain distribute command. To disable fabric distribution using CFS, us the no form of the command.
Page 486: Fcdomain Rcf-Reject
1 Related Commands Command Description show fcdomain Displays global information about the FC domain configurations. show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 8-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 487: Fcdroplatency
The following example shows how to configure the switch latency to 4000 milliseconds. switch(config)# fcdroplatency switch 4000 switch(config)# The following example shows how to revert to the default switch latency. switch(config)# no fcdroplatency switch 4000 switch(config)# Cisco MDS 9000 Family Command Reference 8-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 488 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show fcdroplatency Displays the configured FC drop latency parameters. Cisco MDS 9000 Family Command Reference 8-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 489: Fcflow Stats
The number space for flow index is shared between the aggregate flow statistics and the flow statistics. Examples The following example shows how to configure aggregated fcflow statistics for module 1. switch-config# fcflow stats aggregated module 1 switch-config# Cisco MDS 9000 Family Command Reference 8-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 490 The following example disables the flow counter for module 1. switch(config)# no fcflow stats module 2 index 1001 Related Commands Command Description show fcflow stats Displays the configured FC drop latency parameters. Cisco MDS 9000 Family Command Reference 8-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 491: Fcid-Allocation
To conserve the number of FCIDs used, Cisco MDS 9000 Family switches use a special allocation scheme. Some HBAs do not discover targets that have FCIDs with the same domain and area. Prior to Cisco MDS SAN-OS Release 2.0, the Cisco MDS SAN-OS software maintained a list of tested company ID (also know as Organizational Unit Identifier, or OUI) which do not exhibit this behavior.
Page 492 The following example adds a new company ID to the default area company ID list. switch# config terminal switch(config)# fcid-allocation area company-id 0x003223 Related Commands Command Description show fcid-allocation Displays the configured company IDs. Cisco MDS 9000 Family Command Reference 8-28 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 493: Fcid-Last-Byte
2 switch(config-ficon)# no fcid-last-byte 3 Related Commands Command Description show ficon Displays configured FICON details. ficon vsan vsan-id Enables FICON on the specified VSAN. Cisco MDS 9000 Family Command Reference 8-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 494: Fcinterop Fcid-Allocation
Related Commands Command Description show flogi database Displays the fabric login (FLOGI) table. Cisco MDS 9000 Family Command Reference 8-30 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 495: Fcinterop Loop-Monitor
Related Commands Command Description show flogi database Verify if a storage device is displayed in the Fabric login (FLOGI) table. Cisco MDS 9000 Family Command Reference 8-31 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 496: Fcip Enable
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m fcip enable To enable the FCIP feature in any switch in the Cisco MDS Family, issue the fcip enable command. fcip enable...
Page 497: Fcip Profile
Usage Guidelines When you perform this command, the CLI enters FCIP profile configuration mode. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 498: Fcns Proxy-Port
One name server can be configured to proxy another name server and name server information can be displayed using the CLI. The name server can be viewed using the CLI or the Cisco Fabric Manager. All name server registration requests come from the same port whose parameter is registered or changed.
Page 499: Fcns Reject-Duplicate-Pwwn Vsan
2 Related Commands Command Description show fcns Displays the name server database and statistical information for a specified VSAN or for all VSANs. Cisco MDS 9000 Family Command Reference 8-35 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 500: Fcping
= 165 usec 28 bytes from 0xd70000 time = 262 usec 28 bytes from 0xd70000 time = 219 usec 28 bytes from 0xd70000 time = 228 usec Cisco MDS 9000 Family Command Reference 8-36 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 501 1 28 bytes from 21:01:00:e0:8b:2e:80:93 time = 358 usec 28 bytes from 21:01:00:e0:8b:2e:80:93 time = 226 usec 28 bytes from 21:01:00:e0:8b:2e:80:93 time = 372 usec Cisco MDS 9000 Family Command Reference 8-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 502: Fcroute
Examples The following example specifies the Fibre Channel interface and the route for the domain of the next hop switch for VSAN 2. switch# config terminal Cisco MDS 9000 Family Command Reference 8-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 503 Specifies a preferred path Fibre Channel route map. show fcroute-map Displays the preferred path route map configuration and status. fcroute policy Activates the preferred path Fibre Channel route map. fcroute-map Cisco MDS 9000 Family Command Reference 8-39 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 504: Fcrxbbcredit Extended Enable
Performing the fcrxbbcredit extended enable command enables the switchport fcrxbbcredit extended command. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 505: Fcs Plat-Check-Global Vsan
This command was introduced. Usage Guidelines None. Examples switch# config terminal switch(config)# fcs plat-check-global vsan 2 Related Commands Command Description show fcs Displays fabric configuration server information. Cisco MDS 9000 Family Command Reference 8-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 506: Fcs Register
The following example shows how to register FCS attributes. switch# config terminal switch(config)# fcs register switch(config-fcs-register)# platform Platform1 vsan 10 Related Commands Command Description show fcs Displays fabric configuration server information. Cisco MDS 9000 Family Command Reference 8-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 507: Fcs Virtual-Device-Add
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# fcs virtual-device-add vsan-ranges 2-4,5-8 Related Commands Command Description show fcs Displays fabric configuration server information. Cisco MDS 9000 Family Command Reference 8-43 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 508: Fcsp
The following example reverts to the factory default of auto-passive for these three interfaces. switch(config-if)# no fcsp The following example changes these three interfaces to initiate FC-SP authentication, but does not permit reaunthentication. switch(config-if)# fcsp auto-active 0 Cisco MDS 9000 Family Command Reference 8-44 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 509 (120 minutes) of the initial authentication attempt. switch(config-if)# fcsp auto-active 120 Related Commands Command Description fcsp enable Enable FC-SP. show interface Displays an interface configuration for a specified interface. Cisco MDS 9000 Family Command Reference 8-45 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 510: Fcsp Dhchap
Using SHA-1 as the hash algorithm may prevent RADIUS or TACACS+ usage. If you change the DH group configuration, ensure to change it globally for all switches in the fabric. Cisco MDS 9000 Family Command Reference 8-46 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 511 7 sfsfdf 29:11:bb:cc:dd:33:11:22 The following example configures a clear text password for the local switch to be used with any connecting device. switch(config)# fcsp dhchap password mypassword1 Cisco MDS 9000 Family Command Reference 8-47 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 512 Switch WWN device name. switch(config)# fcsp dhchap devicename 00:11:22:33:55:aa:bb:cc password 7 asdflkjh Related Commands Command Description fcsp enable Enable FC-SP. show fcsp Displays configured FC-SP information. Cisco MDS 9000 Family Command Reference 8-48 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 513: Fcsp Enable
This command was introduced. Usage Guidelines None. Examples The following example enables FC-SP. switch# config terminal switch(config)# fcsp enable switch(config)# Related Commands Command Description show fcsp Displays configured FC-SP information. Cisco MDS 9000 Family Command Reference 8-49 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 514: Fcsp Timeout
The following example configures the FCSP timeout value. switch# config terminal switch(config)# fcsp enable switch(config)# fcsp timeout 60 Related Commands Command Description fcsp enable Enable FC-SP. show fcsp Displays configured FC-SP information. Cisco MDS 9000 Family Command Reference 8-50 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 515: Fctimer
This command was introduced. Usage Guidelines The Cisco MDS 9000, Brocade, and McData FC Error Detect (ED_TOV) and Resource Allocation (RA_TOV) timers default to the same values. They can be changed if needed. In accordance with the FC-SW2 standard, these values must be the same on each switch within in the fabric.
Page 516: Fctimer Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m fctimer abort To discard a Fibre Channel timer (fctimer) Cisco Fabric Services (CFS) distribution session in progress, use the fctimer abort command in configuration mode.
Page 517: Fctimer Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m fctimer commit To apply the pending configuration pertaining to the Fibre Channel timer (fctimer) Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the fctimer commit command in configuration mode.
Page 518: Fctimer Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m fctimer distribute To enable Cisco Fabric Services (CFS) distribution for Fibre Channel timer (fctimer), use the fctimer distribute command. To disable this feature, use the no form of the command.
Page 519: Fctrace
20:00:00:05:30:00:61:5e(0xfffc66) The following example traces a route to the specified device alias in VSAN 1. switch# fctrace device-alias x vsan 1 Route present for : 21:01:00:e0:8b:2e:80:93 20:00:00:05:30:00:4a:e2(0xfffc67) Cisco MDS 9000 Family Command Reference 8-55 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 520: Fc-Tunnel
The Fibre Channel tunnel feature must be enabled (the interface fc-tunnel command) on each switch in the end-to-end path of the Fibre Channel fabric in which RSPAN is to be implemented. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 521 100 switchS(config)# explicit-path Path1 Related Commands Command Description show span session Displays all SPAN session information. show fc-tunnel tunnel-id-map Displays FC tunnel egress mapping information Cisco MDS 9000 Family Command Reference 8-57 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 522: Ficon Enable
VSAN, it remains globally enabled. You must explicitly disable FICON to disable it throughout the fabric. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 523 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Command Description show ficon Displays configured FICON details. Cisco MDS 9000 Family Command Reference 8-59 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 524: Ficon Logical-Port Assign Port-Numbers
You cannot change or release port numbers for interfaces that are active. You must disable the interfaces using the shutdown command. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 525: Ficon Port Default-State Prohibit-All
Note This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter. Examples The following example enables port prohibiting as the default for all implemented interfaces on the switch.
Page 526: Ficon Slot Assign Port-Numbers
9000 Family CLI Configuration Guide or the Cisco MDS 9000 Family Fabric Manager Configuration Guide. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 527 1 assign port-numbers 0-14, 0 WARNING: fc1/16 and fc1/1 have duplicated port-number 0 in port VSAN 99 Related Commands Command Description show ficon Displays configured FICON details. Cisco MDS 9000 Family Command Reference 8-63 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 528: Ficon Swap
Refer to the Cisco MDS 9000 Family CLI Configuration Guide for additional information. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 529 3 15 The following example swaps port 1 with port 6. switch# ficon swap interface fc1/1 fc1/6 Related Commands Command Description show ficon Displays configured FICON details. Cisco MDS 9000 Family Command Reference 8-65 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 530: Ficon-Tape-Accelerator Vsan
FICON write acceleration and tape acceleration can be enabled at the same time on the FCIP interface. Note This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 531 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description write-accelerator Enables write acceleration and tape acceleration for the FCIP interface. show fcip Displays FCIP profile information. Cisco MDS 9000 Family Command Reference 8-67 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 532: Ficon Vsan (Exec Mode)
FICON configuration file. You can see the list of existing configuration files by issuing the show ficon vsan vsan-id command. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 533 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show ficon Displays configured FICON details. Cisco MDS 9000 Family Command Reference 8-69 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 534: Ficon Vsan (Configuration Mode)
When you disable FICON, the FICON configuration file is also deleted. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 535: File
The following example deletes a previously-created FICON configuration file. switch(config-ficon)# no file IplFileA Related Commands Command Description ficon vsan Enable FICON for a VSAN. show ficon Displays configured FICON details. Cisco MDS 9000 Family Command Reference 8-71 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 536: Find
The following example is sample output of all files that begin with the letter a: switch# find a ./accountingd ./acl ./ascii_cfg_server ./arping Related Commands Command Description Changes the default directory or file system. Displays all files in a given file system. Cisco MDS 9000 Family Command Reference 8-72 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 537: Format
This command was introduced. Usage Guidelines The SAN-OS software only supports Cisco-certified CompactFlash devices that are formatted using Cisco MDS switches. Using uncertified CompactFlash devices may result in unpredictable consequences; formatting CompactFlash devices using other platforms may result in errors.
Page 538: Fspf Config Vsan
If configuring spf hold-time, the default value for FSPF is 0. If configuring min-ls-arrival, the default value for FSPF is 1000 msecs. If configuring min-ls-interval, the default value for FSPF is 5000 msecs. Command Modes Configuration mode. Cisco MDS 9000 Family Command Reference 8-74 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 539 Disables the FSPF protocol for the specified interface in the specified VSAN (from the prompt). switch(config-if)# fspf retrasmit Specifies the retransmit time interval for unacknowledged link state updates in specified VSAN (from the prompt). switch(config-if)# Cisco MDS 9000 Family Command Reference 8-75 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 540: Fspf Cost
5000 vsan 1 Related Commands Command Description show fspf interface Displays information for each selected interface. show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 8-76 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 541: Fspf Dead-Interval
4000 vsan 1 Related Commands Command Description show fspf interface Displays information for each selected interface. show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 8-77 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 542: Fspf Enable Vsan
7 Related Commands Command Description fspf config vsan Configures FSPF features for a VSAN. show fspf interface Displays information for each selected interface. Cisco MDS 9000 Family Command Reference 8-78 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 543: Fspf Hello-Interval
3 vsan 1 Related Commands Command Description show fspf interface Displays information for each selected interface. show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 8-79 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 544: Fspf Passive
1 Related Commands Command Description show fspf interface Displays information for each selected interface. show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 8-80 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 545: Fspf Retransmit-Interval
6 vsan 1 Related Commands Command Description show fspf interface Displays information for each selected interface. show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 8-81 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 546 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 8-82 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 547: G Commands
C H A P T E R G Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “About the CLI Command Modes”...
Page 548: Group
Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. policy Configures IKE policy parameters. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 549: Gzip
19443712 bytes free 20971520 bytes total switch# gzip volatile:Samplefile switch# dir 266069 Jul 04 00:51:03 2003 Samplefile.gz Usage for volatile:// 266240 bytes used 20705280 bytes free 20971520 bytes total Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 550 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description gunzip Uncompresses LZ77 coded files. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 551: Gunzip
Jul 04 00:51:03 2003 Samplefile Usage for volatile:// 1527808 bytes used 19443712 bytes free 20971520 bytes total Related Commands Command Description gzip Compresses a specified file using LZ77 coding. Cisco MDS 9000 Family Command Reference OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 552 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference...
Page 553: H Commands
C H A P T E R H Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “About the CLI Command Modes”...
Page 554: Hash
Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. policy Configures IKE policy parameters. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 10-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 555: Host
The following example allows the host to move the switch to an offline state and shut down the ports. switch(config-ficon)# host control switch offline The following example prohibits mainframe users to configure FICON parameters in the Cisco MDS switch (default).
Page 556 The following example allows the host to set the clock on this switch (default). switch(config-ficon)# host set-timestamp Related Commands Command Description show ficon Displays configured FICON details. ficon vsan vsan-id Enables FICON on the specified VSAN. Cisco MDS 9000 Family Command Reference 10-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 557: Hw-Module Logging Onboard
The following example configures on-board failure logging of memory leak events on module 2. switch# config terminal switch(config)# hw-module logging onboard module 2 mem-leak Related Commands Command Description clear logging onboard Clears OBFL information. show logging onboard Displays OBFL information. Cisco MDS 9000 Family Command Reference 10-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 558 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 10-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 559: I Commands
C H A P T E R I Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “About the CLI Command Modes”...
Page 560: Identity
The following example shows how to set the IKE identity to the host name. switch(config-ike-ipsec)# identity hostname node1 The following example shows how to delete the IKE identity. switch(config-ike-ipsec)# no identity hostname node1 Cisco MDS 9000 Family Command Reference 11-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 561 Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 11-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 562: In-Order-Guarantee
The following example shows how to disable in-order delivery for a specific VSAN. switch(config)# no in-order-guarantee vsan 101 Related Commands Command Description show in-order-guarantee Displays the in-order-guarantee status. Cisco MDS 9000 Family Command Reference 11-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 563: Initiator
Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 11-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 564: Install All
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m install all To upgrade all modules in any Cisco MDS 9000 family switch, use the install all command. This upgrade can happen nondisruptively or disruptively depending on the current configuration of your switch.
Page 565 The install all command upgrades all modules in any Cisco MDS 9000 Family switch. During a software upgrade to Cisco MDS SAN-OS 3.1(3), all modules that are online are tested and the installation stops if any modules are running with a faulty CompactFlash. When this occurs, the switch can not be upgraded until the situation is corrected.
Page 566 Hacienda(standby)# Auto booting bootflash:/boot-1.3.1 bootflash:/isan-1.3.1... Booting kickstart image: bootflash:/boot-1.3.1.........Image verification OK Starting kernel... INIT: version 2.78 booting Checking all filesystems..r.r.. done. Cisco MDS 9000 Family Command Reference 11-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 567 Install has been successful. MDS Switch Hacienda login: The following example displays the result of the install all command if the system and kickstart files are specified remotely. Cisco MDS 9000 Family Command Reference 11-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 568 Images will be upgraded according to following table: Module Image Running-Version New-Version Upg-Required ------ ---------- -------------------- -------------------- ------------ 1.3(1) 1.3(2a) bios v1.1.0(10/24/03) v1.0.8(08/07/03) 1.3(1) 1.3(2a) bios v1.1.0(10/24/03) v1.0.8(08/07/03) 1.3(1) 1.3(2a) Cisco MDS 9000 Family Command Reference 11-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 569 Upgrades the supervisor or switching module BIOS. install module loader Upgrades the bootloader on the active or standby supervisor or modules. show version Displays software image version information. Cisco MDS 9000 Family Command Reference 11-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 570: Install Clock-Module
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m install clock-module To upgrade the EPLD images of the clock module on a Cisco MDS 9513 Switch Director, use the install clock-module command.
Page 571 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show version clock-module epld Displays the current EPLD versions on the clock module. Cisco MDS 9000 Family Command Reference 11-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 572: Install License
The following example installs a file named license-file which resides in the bootflash: directory.. switch# install license bootflash:license-file Related Commands Command Description show license Displays license information. Cisco MDS 9000 Family Command Reference 11-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 573: Install Module Bios
{system [bootflash: | slot0: | volatile: | system-image]} Syntax Description module-number From slot 1 to 9 in a Cisco MDS 9500 Series switch. From slot 1 to 2 in a Cisco MDS 9200 Series switch. system Specifies the system image to use (optional).
Page 574: Install Module Epld
Warning: Permanently added '10.6.16.22' (RSA1) to the list of known hosts. user@10.6.16.22's password: epld.img 100% |*****************************| 1269 KB 00:00 Module Number EPLD Curr Ver New Ver ---------------------------------------------------- Power Manager 0x06 XBUS IO 0x07 0x08 Cisco MDS 9000 Family Command Reference 11-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 575 Module 2 EPLD upgrade is successful Related Commands Command Description show version module number epld Displays the current EPLD versions. show version epld Displays the available EPLD versions. Cisco MDS 9000 Family Command Reference 11-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 576: Install Module Loader
This example displays the command being issued on the standby supervisor module in slot 6. Related Commands Command Description show version Verify the output before and after the upgrade. Cisco MDS 9000 Family Command Reference 11-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 577: Install Ssi
The SSM must be running EPLD version 2.1(2) to use the install ssi command. You must install the SSM Note on a Cisco MDS 9500 Series switch to update the EPLD. The install ssi command does not support files located on the SSM modflash.
Page 578: Interface
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m interface To configure an interface on the Cisco MDS 9000 Family of switches, use the interface command in configuration mode.
Page 579 The following example selects the mgmt 0 interface and enters interface configuration submode. switch# config terminal switch(config)# interface mgmt 0 Related Commands Command Description show interface Displays an interface configuration for a specified interface. Cisco MDS 9000 Family Command Reference 11-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 580: Interface Bay | Ext
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m interface bay | ext To configure a Fibre Channel interface on a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM BladeCenter, use the interface bay or interface ext command in configuration mode.
Page 581: Interface Fc
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m interface fc To configure a Fibre Channel interface on the Cisco MDS 9000 Family of switches, use the interface fc command in EXEC mode. To revert to defaults, use the no form of the command.
Page 582 You can specify a range of interfaces by issuing a command with the following example format: interfacespacefc1/1space-space5space,spacefc2/5space-space7 Refer to the Cisco MDS 9000 Family CLI Configuration Guide for information on port number allocation. Use the no shutdown command to enable the interface.
Page 583: Interface Fc-Tunnel
100 switch(config-if)# The following example maps the IP address of the source switch (switch S) to the FC tunnel (100). switchS(config-if)# source 10.10.10.1 Cisco MDS 9000 Family Command Reference 11-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 584 Path1 Related Commands Command Description show interface fc-tunnel Displays an FC tunnel interface configuration for a specified interface. fc-tunnel explicit-path Configures a new or existing next-hop path. Cisco MDS 9000 Family Command Reference 11-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 585: Interface Fcip
Configures FSPF parameters. cost link-cost Enters FSPF link cost. The range is 1 to 65535 dead-interval seconds Specifies the dead interval in seconds. The range is 1 to 65535. Cisco MDS 9000 Family Command Reference 11-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 586 You can specify a range of interfaces by issuing a command with the following example format: interface fcip1space-space5space,spacefcip10space-space12space Refer to the Cisco MDS 9000 Family CLI Configuration Guide for information on port number allocation. Cisco MDS 9000 Family Command Reference 11-28 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 587 51 switch(config-if)# ficon portnumber 234 Related Commands Command Description show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 11-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 588: Interface Gigabitethernet
Syntax Description slot/port Specifies a slot number and port number. cdp enable Enables Cisco Discovery Protocol (CDP) configuration parameters. channel-group group-id Adds to or removes from a PortChannel. The range is 1 to 128. force Forcefully adds a port.
Page 589 “no shutdown” at both ends to bring them up Related Commands Command Description show interface Displays an interface configuration for a specified interface. Cisco MDS 9000 Family Command Reference 11-31 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 590: Interface Iscsi
To configure iSCSI interface, enable iSCSI using the iscsi enable command. You can specify a range of interfaces by issuing a command with the following example format: interface iscsi space fc1/1space-space5space,spacefc2/5space-space7 Cisco MDS 9000 Family Command Reference 11-32 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 591 The following example reverts to using the default pass-thru mode for iSCSI interface 9/1. switch(config)# interface iscsi 9/1 switch(config-if)# mode pass-thru Related Commands Command Description iscsi enable Enables iSCSI. show interface Displays an interface configuration for a specified interface. Cisco MDS 9000 Family Command Reference 11-33 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 592: Interface Mgmt
The following example shuts down the interface using the force option: switch# config terminal switch(config)# interface mgmt 0 switch(config-if)# shutdown force switch(config-if)# Related Commands Command Description show interface mgmt Displays interface configuration for specified interface. Cisco MDS 9000 Family Command Reference 11-34 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 593: Interface Port-Channel
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m interface port-channel To configure a PortChannel interface on the Cisco MDS 9000 Family of switches, use the interface port-channel command.
Page 594 This command was introduced. 1.3(1) Added channel mode active subcommand. Usage Guidelines Refer to the Cisco MDS 9000 Family CLI Configuration Guide for information on port number allocation. Examples The following example enters configuration mode and configures a PortChannel interface.
Page 595: Interface Vsan
The following example selects a VSAN interface and enters interface configuration submode. switch# config terminal switch(config)# interface vsan 1 switch(config-if)# Related Commands Command Description show interface Displays interface configuration for specified interface. Cisco MDS 9000 Family Command Reference 11-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 596: Ip Access-Group
Gigabitethernet 3/1 switch(config-if)# ip access-group aclPermit The following example deletes the access group called aclPermit. switch(config-if)# no ip access-group aclPermit Cisco MDS 9000 Family Command Reference 11-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 597 The following example removes the access list called aclPermitUdp for local egress traffic. switch(config-if)# no ip access-group aclPermitUdp out Related Commands Command Description ip access-list Configures IP access control lists. show ip access-list Displays the IP-ACL configuration information. Cisco MDS 9000 Family Command Reference 11-39 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 598: Ip Access-List
A 32-bit quantity in four-part, dotted-decimal format • A keyword any as an abbreviation for a destination and a • destination-wildcard of 0.0.0.0 255.255.255.255 Cisco MDS 9000 Family Command Reference 11-40 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 599 The following example configures the an IP-ACL called aclPermit and permits IP traffic from any source address to any destination address. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# ip access-list aclPermit permit ip any any Cisco MDS 9000 Family Command Reference 11-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 600 End with CNTL/ switch(config)# no ip access-list aclDenyTcpIpPrt5 deny tcp 1.2.3.0 0.0.0.255 eq port 5 Related Commands Command Description show ip access-list Displays the IP-ACL configuration information. Cisco MDS 9000 Family Command Reference 11-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 601: Ip Address (Fcip Profile Configuration Submode)
Configures the interface using an existing profile ID from 1 to 255. interface_number use-profile profile-id show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 11-43 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 602: Ip Address (Interface Configuration)
Configures the interface using an existing profile ID from 1 to 255. interface_number use-profile profile-id show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 11-44 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 603: Ip-Compression
FCIP link if this feature is enabled on that link. By default the FCIP compression is disabled. When enabled, the software defaults to using the auto mode (if a mode is not specified). Cisco SAN-OS Release 2.0(1b) and later, you to configure FCIP compression using one of the following modes: mode1 is a fast compression mode for high bandwidth links (>...
Page 604 MPS-14/2 modules, and software compression in IPS-4 and IPS-8 modules. In Cisco MDS SAN-OS Release 2.1(1a) and later, the auto mode option uses a combination of compression modes to effectively utilize the WAN bandwidth. The compression modes change dynamically to maximize the WAN bandwidth utilization.
Page 605: Ip Default-Gateway
The following examples configures the IP default gateway to 1.1.1.4. switch# config terminal switch(config)# ip default-gateway 1.1.1.4 Related Commands Command Description show ip route Displays the IP address of the default gateway. Cisco MDS 9000 Family Command Reference 11-47 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 606: Ip Default-Network
The following examples configures the IP address of the default network to 1.1.1.4. switch# config terminal switch(config)# ip default-network 1.1.1.4 switch(config)# ip default-gateway 1.1.1.4 Related Commands Command Description show ip route Displays the IP address of the default gateway. Cisco MDS 9000 Family Command Reference 11-48 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 607: Ip Domain-List
The following example configures the IP domain list. switch# config terminal switch(config)# ip domain MyList Related Commands Command Description show ip route Displays the IP address of the default gateway. Cisco MDS 9000 Family Command Reference 11-49 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 608: Ip Domain-Lookup
The following example configures a DNS server lookup feature. switch# config terminal switch(config)# ip domain-lookup Related Commands Command Description show ip route Displays the IP address of the default gateway. Cisco MDS 9000 Family Command Reference 11-50 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 609: Ip Domain-Name
The following example configures a domain name. switch# config terminal switch(config)# ip domain-name MyDomain Related Commands Command Description show ip route Displays the IP address of the default gateway. Cisco MDS 9000 Family Command Reference 11-51 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 610: Ip Name-Server
The following example deletes the configured server(s) and reverts to factory default. switch(config)# no ip name-server Related Commands Command Description show ip route Displays the IP address of the default gateway. Cisco MDS 9000 Family Command Reference 11-52 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 611: Ip Route
IP route 10.0.0.0 255.0.0.0 20.20.20.10 distance 10 interface vsan 1 Related Commands Command Description show ip route Displays the IP address routes configured in the system. Cisco MDS 9000 Family Command Reference 11-53 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 612: Ip Routing
Examples The following example enables the IP forwarding feature. switch# config terminal switch(config)# ip routing Related Commands Command Description show ip routing Displays the IP routing state. Cisco MDS 9000 Family Command Reference 11-54 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 613: Ips Netsim Delay-Ms
Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-55 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 614: Ips Netsim Delay-Us
Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-56 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 615: Ips Netsim Drop Nth
The following example shows how to configure an interface to drop every 100th packet, 2 packets at a time. switch# config terminal switch(config)# switch(config)# san-ext-tuner enable switch(config)# exit switch# switch# ips netsim drop nth 100 burst 2 ingress gigabitethernet 2/3 Cisco MDS 9000 Family Command Reference 11-57 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 616 Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-58 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 617: Ips Netsim Drop Random
The following example shows how to configure an interface to drop one percent of packets. switch# config terminal switch(config)# switch(config)# san-ext-tuner enable switch(config)# exit switch# switch# ips netsim drop random 100 burst 1 ingress gigabitethernet 2/3 Cisco MDS 9000 Family Command Reference 11-59 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 618 Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-60 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 619: Ips Netsim Enable
2/3 gigabitethernet 2/4 Related Commands Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. Cisco MDS 9000 Family Command Reference 11-61 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 620: Ips Netsim Max-Bandwidth-Kbps
Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-62 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 621: Ips Netsim Max-Bandwidth-Mbps
Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-63 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 622: Ips Netsim Qsize
Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-64 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 623: Ips Netsim Reorder
The following example shows reordering at 50 percent with a distance limit of 5. switch# config terminal switch(config)# switch(config)# san-ext-tuner enable switch(config)# exit switch# switch# ips netsim reorder random 50 distance 5 ingress gigabitethernet 2/3 Cisco MDS 9000 Family Command Reference 11-65 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 624 Command Description show ips netsim Displays a summary of the interfaces that are currently operating in network simulation mode. ips netsim enable Enables the IP Network Simulator. Cisco MDS 9000 Family Command Reference 11-66 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 625: Ipv6 Access-List
IPv6 and its extended addressing capabilities. In particular, it is important to understand the different types of IPv6 address formats, the IPv6 address prefix format, and the different IPv6 address types. For detailed information about IPv6, refer to the Cisco MDS 9000 Family CLI Configuration Guide.
Page 626: Ipv6 Address
Enables automatic configuration of IPv6 addresses using stateless autoconfig autoconfiguration on an interface and enables IPv6 processing on the interface. ipv6 enable Enables IPv6 processing on the interface. Cisco MDS 9000 Family Command Reference 11-68 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 627 Configures IPv6 neighbor discovery commands on the interface. ipv6 traffic-filter Configures IPv6 ACLs to filter traffic for packets on the interface. show interface Displays interface configuration information. Cisco MDS 9000 Family Command Reference 11-69 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 628: Ipv6 Address Autoconfig
This command was introduced. Usage Guidelines You can use the ipv6 address autoconfig command to enable IPv6 stateless autoconfiguration on the specified interface. For additional information about autoconfiguration, refer to the Cisco MDS 9000 Family CLI Configuration Guide. Examples The following example assigns enables IPv6 stateless autoconfiguration on the interface.
Page 629: Ipv6 Enable
Configures IPv6 neighbor discovery commands on the interface. ipv6 traffic-filter Configures IPv6 ACLs to filter traffic for packets on the interface. show interface Displays interface configuration information. Cisco MDS 9000 Family Command Reference 11-71 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 630: Ipv6 Nd
A high number of DAD attempts (greater than 2) can delay address assignment. Note For complete information about IPv6 neighbor discovery, refer to the Cisco MDS 9000 Family CLI Configuration Guide. Examples The following example sets the duplicate address detection attempts count to 2.
Page 631 Enables IPv6 processing on the interface. ipv6 traffic-filter Configures IPv6 ACLs to filter traffic for packets on the interface. show interface Displays interface configuration information. Cisco MDS 9000 Family Command Reference 11-73 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 632: Ipv6 Route
IPv6 and its extended addressing capabilities. In particular, it is important to understand the different types of IPv6 address formats, the IPv6 address prefix format, and the different IPv6 address types. For detailed information about IPv6, refer to the Cisco MDS 9000 Family CLI Configuration Guide.
Page 633 Displays a summary of ACLs. show ipv6 route Displays the static IPv6 routes configured on the switch. show ipv6 routing Displays the IPv6 unicast routing configured on the switch. Cisco MDS 9000 Family Command Reference 11-75 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 634: Ipv6 Routing
IPv6 and its extended addressing capabilities. In particular, it is important to understand the different types of IPv6 address formats, the IPv6 address prefix format, and the different IPv6 address types. For detailed information about IPv6, refer to the Cisco MDS 9000 Family CLI Configuration Guide.
Page 635: Ipv6 Traffic-Filter
Enables IPv6 processing on the interface. ipv6 nd Configures IPv6 ACLs to filter traffic for packets on the interface. show interface Displays interface configuration information. Cisco MDS 9000 Family Command Reference 11-77 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 636: Iscsi Authentication
Use the chap-none option to override the global configuration which might have been configured to allow only one option—either CHAP or none—not both. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 637 The following example configures CHAP only for ISCSI authentication. switch# config terminal switch(config)# iscsi authentication chap Related Commands Command Description show iscsi global Displays all iSCSI initiators configured by the user. Cisco MDS 9000 Family Command Reference 11-79 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 638: Iscsi Duplicate-Wwn-Check
As of Cisco MDS SAN-OS Release 2.1(2), you can use the iscsi duplicate-wwn-check command to check for and remove any configured WWNs that belong to the system. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 639 Assigns an iSCSI name and changes to iSCSI initiator configuration submode. static Assigns persistent WWNs to an iSCSI initiator in iSCSI initiator configuration submode. show iscsi initiator Displays information about configured iSCSI initiators. Cisco MDS 9000 Family Command Reference 11-81 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 640: Iscsi Dynamic Initiator
A dynamic iSLB initiator can be converted to a static iSLB initiator and its WWNs can be made persistent. You cannot convert a dynamic iSCSI initiator to a static iSLB initiator, or a dynamic iSLB initiator to a Note static iSCSI initiator. Cisco MDS 9000 Family Command Reference 11-82 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 641 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 642: Iscsi Enable
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m iscsi enable To enable the iSCSI feature in any Cisco MDS switch, issue the iscsi enable command. To disable this feature, use the no form of the command.
Page 643: Iscsi Enable Module
The iSCSI feature must be enabled before executing this command. Note Related Commands Command Description iscsi enable Enables the iSCSI features but does not create the interfaces. Cisco MDS 9000 Family Command Reference 11-85 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 644: Iscsi Import Target Fc
Usage Guidelines This command directs iSCSI to dynamically import all Fibre Channel targets into iSCSI. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 645: Iscsi Initiator Idle-Timeout
When the idle timeout value is set to 0, the initiator information is cleared immediately after the last session from the initiator terminates. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 646: Iscsi Initiator Ip-Address
Also, an iSCSI initiator can be put into multiple VSANs. An iSCSI host can become a member of one or more VSANs. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 647 The following command assigns the user provided WWN as pWWN for the iSCSI initiator. switch(config-(iscsi-init))# pWWN 21:00:00:20:37:73:3b:20 Related Commands Command Description show iscsi initiator Displays information about configured iSCSI initiators. Cisco MDS 9000 Family Command Reference 11-89 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 648: Iscsi Initiator Name
Also, an iSCSI initiator can be put into multiple VSANs. An iSCSI host can become a member of one or more VSANs. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 649: Iscsi Interface Vsan-Membership
For additional information, refer to the “Configuring iSCSI” chapter of the Cisco MDS 9000 Family CLI Configuration Guide. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 650 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show iscsi initiator Displays information about configured iSCSI initiators. Cisco MDS 9000 Family Command Reference 11-92 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 651: Iscsi Save-Initiator
You cannot convert a dynamic iSCSI initiator to a static iSLB initiator or a dynamic iSLB initiator to a static iSCSI initiator. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 652 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description iscsi initiator Configures an iSCSI initiator. show iscsi initiator Displays information about configured iSCSI initiators. Cisco MDS 9000 Family Command Reference 11-94 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 653: Iscsi Virtual-Target Name
Specifies the Fibre Channel Logical Unit Number (LUN). iscsi-lun number Specifies the iSCSI virtual target number. sec-lun number Specifies the secondary Fibre Channel LUN. trespass Moves LUNs forcefully from one port to another. Cisco MDS 9000 Family Command Reference 11-95 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 654 One iSCSI target cannot contain more than one Fibre Channel target. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class Note BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 655 50:00:00:a1:94:cc secondary-pwwn 50:00:00:a1:97:ac switch(config-iscsi-tgt)# trespass Related Commands Command Description show iscsi virtual target Displays information about iSCSI virtual targets. Cisco MDS 9000 Family Command Reference 11-97 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 656: Islb Abort
This action has no effect on the active configuration on any switch in the fabric. The islb abort command can be issued only by the user who started the Cisco Fabric Services (CFS) session and only on the switch that started the CFS session.
Page 657: Islb Commit
This action changes the active configuration on all Cisco MDS switches in the fabric. The islb commit command can be issued only by the user who started the Cisco Fabric Services (CFS) session and only on the switch that started the CFS session.
Page 658: Islb Distribute
You can use the islb distribute command to enable the distribution of iSLB configuration information to other Cisco MDS switches in the fabric using the Cisco Fabric Services (CFS) infrastructure. You can synchronize the iSLB configuration across the fabric from the console of a single MDS switch.
Page 659 Commits the iSLB configuration distribution and releases the fabric lock. clear islb session Clears a pending iSLB configuration. This command can be issued on any switch by a user with admin privileges. Cisco MDS 9000 Family Command Reference 11-101 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 660: Islb Initiator
IPv6 option) for an iSLB initiator. switch# config t switch(config)# islb initiator ipaddress 1111.2222.3333.4::5 switch(config-islb-init)# The following example deletes the configured iSLB initiator. switch(config)# no islb initiator ipaddress 1111.2222.3333.4::5 Cisco MDS 9000 Family Command Reference 11-102 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 661 The following example deletes the configured iSLB initiator: switch(config)# no islb initiator ipaddress name iqn.1987-02.co..cisco.initiator Related Commands Command Description show islb initiator Displays iSLB initiator configuration information.
Page 662: Islb Save-Initiator
The following example saves the nWWNs and pWWNs that have automatically been assigned to the iSLB initiator whose IPv4 address is specified. switch(config)# islb save-initiator ip-address 10.10.100.11 Cisco MDS 9000 Family Command Reference 11-104 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 663 Please execute "copy run start" to keep the WWNs persistent across switch reboots Related Commands Command Description show islb session Displays detailed iSLB session information. Cisco MDS 9000 Family Command Reference 11-105 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 664: Islb Virtual-Target Name
Configuration mode. Command History Release Modification 3.0(1) This command was introduced. Usage Guidelines This command is used to configure a static target for access by iSLB initiators. Cisco MDS 9000 Family Command Reference 11-106 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 665 The following example maps a pWWN to a Fibre Channel target. ips-hac1(config-islb-tgt)# pwwn 26:00:01:02:03:04:05:06 Related Commands Command Description show islb virtual-target Displays information about iSLB virtual targets. Cisco MDS 9000 Family Command Reference 11-107 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 666: Islb Vrrp
The information is synchronized to all switches via Cisco Fabric Services (CFS) if recovery is needed when a master port fails. The initiator gets a temporary redirect iSCSI login response. The host then logs in to the slave port at its physical IP address.
Page 667 Changing the VSAN membership, the forwarding mode, and the authentication of an iSCSI interface that is part of an iSLB VRRP group impacts load balancing on the interface. For additional information, refer to the “Configuring iSCSI” chapter of the Cisco MDS 9000 Family CLI Configuration Guide.
Page 668: Islb Zoneset Activate
Examples The following example activates an iSLB auto zone. switch# config t switch(config)# islb zoneset activate Related Commands Command Description show zoneset active Displays active zone sets. Cisco MDS 9000 Family Command Reference 11-110 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 669: Isns
Description isns-server enable Enables the iSNS server. isns reregister Reregisters the iSNS object. show interface gigabitethernet Displays configuration and status information for a specified Gigabit Ethernet interface. Cisco MDS 9000 Family Command Reference 11-111 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 670 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Command Description show interface port-channel Displays configuration and status information for a specified PortChannel interface. show isns Displays iSNS information. Cisco MDS 9000 Family Command Reference 11-112 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 671: Isns Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m isns distribute To enable Cisco Fabric Services (CFS) distribution for Internet Storage Name Service (iSNS), use the isns distribute command. To disable this feature, use the no form of the command.
Page 672: Isns Esi Retries
The following example shows how change the ESI retries limit to eight. switch# config terminal switch(config)# isns esi retries 8 Related Commands Command Description isns-server enable Enables the iSNS server. show isns Displays iSNS information. Cisco MDS 9000 Family Command Reference 11-114 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 673: Isns Profile Name
UserProfile switch(config-isns-profile)# Related Commands Command Description server Configures a server IP address in an iSNS profile. show isns Displays iSNS information. Cisco MDS 9000 Family Command Reference 11-115 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 674: Isns Reregister
The following command re-registers portal and targets for a tagged interface: switch# isns reregister gigabitethernet 1/4 Related Commands Command Description show isns profile Displays details for configured iSNS profiles. Cisco MDS 9000 Family Command Reference 11-116 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 675: Isns-Server Enable
Enables iSNS distributed support. isns esi retries Configures ESI retry attempts. isns profile name Creates and configures iSNS profiles. server Configures iSNS server attributes. show isns Displays iSNS information. Cisco MDS 9000 Family Command Reference 11-117 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 676: Ivr Abort
Related Commands Command Description ivr distribute Enables CFS distribution for IVR. show ivr Displays IVR CFS distribution status and other details. Cisco MDS 9000 Family Command Reference 11-118 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 677: Ivr Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m ivr commit To apply the pending configuration pertaining to the Inter-VSAN Routing (IVR) Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the ivr commit command in configuration mode.
Page 678: Ivr Copy Active-Service-Group User-Configured-Service-Group
Successfully copied active service group to user-configured service group database Related Commands Command Description clear ivr service-group Clears the IVR service group database. database show ivr service-group Displays IVR service groups. Cisco MDS 9000 Family Command Reference 11-120 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 679: Ivr Copy Active-Topology User-Configured-Topology
Copies the automatically discovered inter-VSAN routing (IVR) VSAN user-configured topology to the user configured topology. topology show ivr vsan topology Displays the IVR VSAN topology configuration. Cisco MDS 9000 Family Command Reference 11-121 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 680: Ivr Copy Active-Zoneset Full-Zoneset
Copies the automatically discovered inter-VSAN routing (IVR) VSAN user-configure topology topology to the user configured topology. show ivr zoneset active Displays the active IVR zone set. Cisco MDS 9000 Family Command Reference 11-122 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 681: Ivr Copy Auto-Topology User-Configured-Topology
After using the ivr copy auto-topology user-configured-topology command to copy the automatically discovered VSAN topology into the user configured topology you must use the ivr commit command to apply the pending configuration changes to the IVR topology using Cisco Fabric Services (CFS) distribution.
Page 682: Ivr Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m ivr distribute To enable Cisco Fabric Services (CFS) distribution for Inter-VSAN Routing (IVR), use the ivr distribute command. To disable this feature, use the no form of the command.
Page 683: Ivr Enable
When you disable this configuration, all related configurations are automatically discarded. Note This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter. Examples The following command enters the configuration mode and enables the IVR feature on this switch.
Page 684: Ivr Fcdomain Database Autonomous-Fabric-Num
VSAN 20. switch# config t switch(config)# no ivr fcdomain database autonomous-fabric-num 10 vsan 20 Related Commands Command Description show ivr fcdomain database Displays IVR fcdomain database entry information. Cisco MDS 9000 Family Command Reference 11-126 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 685: Ivr Nat
The following example shows how to explicitly enable NAT functionality for IVR. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# ivr nat Related Commands Command Description show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 11-127 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 686: Ivr Refresh
Related Commands Command Description ivr enable Enables the Inter-VSAN Routing (IVR) feature. ivr withdraw domain Withdraws an overlapping virtual domain from a specified VSAN. Cisco MDS 9000 Family Command Reference 11-128 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 687: Ivr Service-Group Activate
The following example sets the default IVR service group policy to deny: switch# config terminal switch(config)# ivr service-group activate default-sg-deny The following example disables the default service group: switch# config terminal switch(config)# no ivr service-group activate Cisco MDS 9000 Family Command Reference 11-129 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 688 Enables inter-VSAN routing (IVR). ivr service-group Configures an inter-VSAN routing (IVR) service group. name show ivr service-group Displays an inter-VSAN routing service group database. database Cisco MDS 9000 Family Command Reference 11-130 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 689: Ivr Service-Group Name
Automatic IVR topology discovery using the ivr commit auto command. • Using the autonomous-fabric-id (IVR topology database configuration) command, you can restrict the IVR traffic to the AFIDs and VSANs configured in the service group. Cisco MDS 9000 Family Command Reference 11-131 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 690 Related Commands Command Description ivr enable Enables the Inter-VSAN Routing (IVR) feature ivr vsan-topology auto Enables automatic discovery of the IVR topology. show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 11-132 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 691: Ivr Virtual-Fcdomain-Add
1 Related Commands Command Description show ivr virtual-fcdomain-add-status Displays the configured VSAN topology for a fabric. ivr withdraw domain Removes overlapping domains. Cisco MDS 9000 Family Command Reference 11-133 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 692: Ivr Vsan-Topology
The following command enables VSAN topology database auto mode, which allows the switch to automatically discover the IVR topology. switch(config)# ivr vsan-topology auto Cisco MDS 9000 Family Command Reference 11-134 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 693 Enables the Inter-VSAN Routing (IVR) feature. autonomous-fabric-id (IVR topology Configure an autonomous phobic ID into the IVR database configuration) topology database. show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 11-135 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 694: Ivr Vsan-Topology Database
To use this command you must first enable IVR using the ivr enable command. You can have up to 64 VSANs (or 128 VSANs as of Cisco MDS SAN-OS Release 2.1(1a)) in an IVR topology. Specify the IVR topology using the following information: The switch WWNs of the IVR-enabled switches.
Page 695 Enables the Inter-VSAN Routing (IVR) feature. autonomous0fabric-id (IVR topology Configure an autonomous phobic ID into the IVR database configuration) topology database show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 11-137 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 696: Ivr Withdraw Domain
The following command withdraws overlapping domains. switch# ivr withdraw domain 10 vsan 20 Related Commands Command Description show ivr virtual-fcdomain-add-status Displays the configured VSAN topology for a fabric. Cisco MDS 9000 Family Command Reference 11-138 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 697: Ivr Zone Name
Ivz_vsan2-3 switch(config-ivr-zone)# member pwwn 21:00:00:e0:8b:02:ca:4a vsan 3 Related Commands Command Description show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 11-139 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 698: Ivr Zone Rename
The following example renames the IVR zone from east to west. switch# ivr zone rename east west Related Commands Command Description ivr zone name Creates and configures an IVR zone. show ivr Displays IVR information. Cisco MDS 9000 Family Command Reference 11-140 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 699: Ivr Zoneset
Ivr_zoneset1 switch(config-ivr-zoneset)# member Ivz_vsan2-3 switch(config-ivr-zoneset)# exit switch(config)# ivr zoneset activate name IVR_ZoneSet1 Related Commands Command Description show ivr Displays IVR feature information. Cisco MDS 9000 Family Command Reference 11-141 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 700: Ivr Zoneset Rename
The following example renames the IVR zone set from north to south. switch# ivr zoneset rename north south Related Commands Command Description ivr zoneset name Creates and configures an IVR zone set. show ivr Displays IVR information. Cisco MDS 9000 Family Command Reference 11-142 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 701: Chapter 12 J Commands
C H A P T E R J Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 702: Job Name
MyJob Related Commands Command Description scheduler enable Enables the command scheduler. scheduler schedule name Configures a schedule for the command scheduler. show scheduler Displays scheduler information. Cisco MDS 9000 Family Command Reference 12-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 703: Chapter 13 K Commands
C H A P T E R K Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 704: Keepalive
Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 13-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 705: Kernel Core
The following example limits core generation to two modules. switch(config)# kernel core limit 2 succeeded The following example configures module 5 to generate cores. switch(config)# kernel core module 5 succeeded Cisco MDS 9000 Family Command Reference 13-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 706: Kernel Core
The following example configures the external server. switch(config)# kernel core target 10.50.5.5 succeeded Related Commands Command Description show kernel Displays configured kernel core settings. show running-config Displays all switch configurations saved to PSS. Cisco MDS 9000 Family Command Reference 13-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 707: Key
The following example shows how to set the preshared key for the specified peer. switch(config-ike-ipsec)# key sample hostname node1 The following example shows how to delete the preshared key for the specified peer. switch(config-ike-ipsec)# no key sample hostname node1 Cisco MDS 9000 Family Command Reference 13-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 708 Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 13-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 709: Chapter 14 L Commands
C H A P T E R L Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 710: Lifetime Seconds
Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. policy Configures IKE protocol policy. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 14-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 711: Line Com1
Sets the transmit and receive speeds. The range is 110 to 115, 200 baud. stopbits Sets async line stopbits. Sets one stop bit. Sets two stop bits. Defaults 9600 Baud 8 databits 1 stopbit Parity none Default init string Cisco MDS 9000 Family Command Reference 14-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 712 You must first set the user-input string before initializing the string. For additional information on the user-input initialization string for the Supervisor-1 and Supervisor-2 modules, refer to the Cisco SAN-OS MDS 9000 Family CLI Configuration Guide. Examples The following example configures a line console and sets the options for that terminal line.
Page 713 Related Commands Command Description line console Configure primary terminal line. line vty Configure virtual terminal line. show line com1 Displays COM1 information. Cisco MDS 9000 Family Command Reference 14-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 714: Line Console
9600, 19200, 38400, and 115200. stopbits Sets async line stopbits. Sets one stop bit. Sets two stop bits. Defaults 9600 Baud 8 databits 1 stopbit Cisco MDS 9000 Family Command Reference 14-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 715 The following example assigns the user-specified initialization string to its corresponding profile. switch# config terminal switch(config)# line console switch(config-console)# modem set-string user-input ATE0Q1&D2&C1S0=3\015 Cisco MDS 9000 Family Command Reference 14-7 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 716 Related Commands Command Description line vty Configure virtual terminal line. line com1 Configures the auxiliary COM 1 port show line console Displays console information. Cisco MDS 9000 Family Command Reference 14-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 717: Line Vty
# config terminal switch(config)# line vty switch(config-line)# exec-timeout 60 Related Commands Command Description line console Configure primary terminal line. line com1 Confgiures the auxiliary COM 1 port Cisco MDS 9000 Family Command Reference 14-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 718: Link (Sdv Virtual Device Configuration Submode)
1 switch(config-sdv-virt-dev)# link pwwn 21:00:00:04:cf:cf:45:40 Related Commands Command Description sdv enable Enables or disables SAN device virtualization. show sdv statistics Displays SAN device virtualization statistics. Cisco MDS 9000 Family Command Reference 14-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 719: Link-State-Trap
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# interface bay 2 switch(config-if)# no link-state-trap Related Commands Command Description show interface Displays interface information. Cisco MDS 9000 Family Command Reference 14-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 720: Logging Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m logging abort To discard the logging Cisco Fabric Services (CFS) distribution session in progress, use the logging abort command in configuration mode.
Page 721: Logging Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m logging commit To apply the pending configuration pertaining to the logging Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the logging commit command in configuration mode.
Page 722: Logging Console
Logging messages with a severity level of 2 or above will be displayed on the console. switch# config terminal switch(config)# logging console 2 Related Commands Command Description show logging Displays logging configuration information. Cisco MDS 9000 Family Command Reference 14-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 723: Logging Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m logging distribute To enable Cisco Fabric Services (CFS) distribution for logging, use the logging distribute command. To disable this feature, use the no form of the command.
Page 724: Logging Level
4 or above will be displayed. switch# config terminal switch(config)# logging level kernel 4 Related Commands Command Description show logging Displays logging configuration information. Cisco MDS 9000 Family Command Reference 14-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 725: Logging Logfile
(errors) to be logged in a file named ManagerLogFile. By configuring this limit, the file size is restricted to 3,000,000 bytes. switch# config terminal switch(config)# logging logfile ManagerLogFile 3 size 3000000 Related Commands Command Description show logging Displays logging configuration information. Cisco MDS 9000 Family Command Reference 14-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 726: Logging Module
The following example sets message logging for modules at level 7. switch # config terminal switch(config)# logging module 7 Related Commands Command Description show logging Displays logging configuration information. Cisco MDS 9000 Family Command Reference 14-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 727: Logging Monitor
The following example sets terminal line (monitor) message logging at level 2. switch # config terminal switch(config)# logging monitor 2 Related Commands Command Description show logging Displays logging configuration information. Cisco MDS 9000 Family Command Reference 14-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 728: Logging Server
Use mail facility news Use USENET news facility syslog Use syslog facility user Use user facility uucp Use Unix-to-Unix copy system facility Defaults None. Command Modes Configuration mode. Cisco MDS 9000 Family Command Reference 14-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 729 Enable message logging to the specified remote server for level 7 messages. switch # config terminal switch(config)# logging sever sanjose 7 Related Commands Command Description show logging Displays logging configuration information. Cisco MDS 9000 Family Command Reference 14-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 730: Logging Timestamp
The following example sets the logging time stamp to milliseconds. switch # config terminal switch(config)# logging timestamp milliseconds Related Commands Command Description show logging Displays logging configuration information. Cisco MDS 9000 Family Command Reference 14-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 731: Chapter 15 M Commands
C H A P T E R M Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 732: Match
The following example creates a class map called MyClass1 and places you in the class map configuration submode to match any (default) criteria specified for this class. switch# config terminal Cisco MDS 9000 Family Command Reference 15-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 733 The following example removes a match based on the specified source interface. switch(config-cmap)# no match input-interface fc 3/5 Related Commands Command Description qos enable Enables QoS. show qos Displays QoS information. Cisco MDS 9000 Family Command Reference 15-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 734: Match Address
Command Description crypto ike domain ipsec Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. show crypto map domain ipsec Displays IPsec crypto map information. Cisco MDS 9000 Family Command Reference 15-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 735: Mcast Root
The following example shows how to configure the multicast root VSAN. switch# config terminal switch(config)# mcast root principal vsan 4001 Related Commands Command Description show mcast Displays multicast information. Cisco MDS 9000 Family Command Reference 15-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 736: Member (Fcalias Configuration Submode)
Specifies the member symbolic node name. The maximum length is nodename 255 characters. Defaults None. Command Modes Fcalias configuration submode. Cisco MDS 9000 Family Command Reference 15-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 737 The following example shows how to delete the specified member. switch(config-fcalias)# no member ip-address 2020:dbc0:80::4076 Related Commands Command Description fcalias name Configures an FC alias. show fcalias Displays the member name information in an FC alias. Cisco MDS 9000 Family Command Reference 15-7 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 738: Member (Ivr Zone Configuration)
You can configure an IVR zone member based on the specified pWWN and LUN value or, based on the specified pWWN, LUN value, and AFID. The CLI interprets the LUN identifier value as a hexadecimal value whether or not the 0x prefix is Note included. Cisco MDS 9000 Family Command Reference 15-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 739 End with CNTL/Z. switch(config)# ivr zone name IvrLunZone switch(config-ivr-zone)# member pwwn 29:00:00:05:30:00:06:ea vsan 1 autonomous-fabric-id Related Commands Command Description show ivr zone Displays the IVR zone information. Cisco MDS 9000 Family Command Reference 15-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 740: Member (Zone Configuration And Zoneset-Zone Configuration Submode)
255 characters. Defaults This command can be used in both zone configuration submode and zoneset-zone configuration submode. Command Modes Zone set zone configuration submode and zoneset-zone configuration submode. Cisco MDS 9000 Family Command Reference 15-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 741 Used to specify a name for a zone set. submode) zone name (zone set Configures a zone in a zoneset. configuration submode) show zoneset Displays zone set information. Cisco MDS 9000 Family Command Reference 15-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 742: Member (Zoneset Configuration Submode)
Zoneset1 vsan 10 switch(config-zoneset)# member ZoneA Related Commands Command Description show zone Displays zone information. zoneset name Creates a zone set. Cisco MDS 9000 Family Command Reference 15-12 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 743: Metric (Islb Initiator Configuration)
Displays iSLB initiator information for the specified configured initiator. configured show islb initiator detail Displays detailed iSLB initiator information. show islb initiator Displays iSLB initiator summary information. summary Cisco MDS 9000 Family Command Reference 15-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 744: Mkdir
Related Commands Command Description Displays a list of files on a file system. rmdir Removes an existing directory in the Flash file system. Cisco MDS 9000 Family Command Reference 15-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 745: Modem Connect Line
The following example announces a modem connection from the line console. switch# modem connect line console The following example announces a modem connection from the COM1 port. switch# modem connect line com1 Cisco MDS 9000 Family Command Reference 15-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 746: Move
Displays a list of files on a file system. mkdir Creates a directory in the Flash file system. rmdir Removes an existing directory in the Flash file system. Cisco MDS 9000 Family Command Reference 15-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 747: Mutual-Chap Username (Iscsi Initiator Configuration And Islb Initiator Configuration)
Added iSLB initiator configuration submode. Usage Guidelines The iSLB initiator can authenticate the Cisco MDS switch’s initiator target during the iSCSI login phase. This authentication requires the user to configure a username and password for the switch to present to the iSLB initiator.
Page 748 Displays iSLB initiator information for the configured iSLB initiator. configured show islb initiator detail Displays detailed iSLB initiator information. show islb initiator Displays iSLB initiator summary information. summary Cisco MDS 9000 Family Command Reference 15-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 749: N Commands
C H A P T E R N Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 750: Nasb Module
LUN that is a Storage Array Controller (Peripheral Device Type = 0x0C). switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# nasb module 4 vsan 10 control Cisco MDS 9000 Family Command Reference 16-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 751 Displays the NASB configuration on the SSM. nasb rediscover module Initiates the rediscovery of a target device used for NASB on an SSM where the feature is enabled. Cisco MDS 9000 Family Command Reference 16-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 752: Nasb Rediscover Module
Storage Array Controller and multiple LUNs. show nasb Displays the NASB configuration on the SSM. ssm enable feature Enables the NASB feature on the SSM. Cisco MDS 9000 Family Command Reference 16-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 753: Native-Autonomous-Fabric-Num
20 native-vsan 30 Related Commands Command Description ivr fcdomain database Creates IVR persistent FC IDs. autonomous-fabric-num show ivr fcdomain database Displays IVR fcdomain database entry information. Cisco MDS 9000 Family Command Reference 16-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 754: Npiv Enable
The following example disables NPIV for all VSANs on the switch. switch(config)# no npiv enable Related Commands Command Description show interface Displays interface configurations. Cisco MDS 9000 Family Command Reference 16-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 755: Nport Pwwn
11:22:33:44:55:66:77:88 vsan 1 interface gigabitethernet 1/1 Related Commands Command Description san-ext-tuner Enters SAN extension configuration mode. show san-ext-tuner Shows SAN extension tuner information. Cisco MDS 9000 Family Command Reference 16-7 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 756: Npv Enable
Examples The following example shows how to enable NPV. switch# config switch(config)# npv enable Related Commands Command Description show npv status Displays the NPV current status. Cisco MDS 9000 Family Command Reference 16-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 757: Ntp
This example forms a peer association with a peer. You can specify multiple associations. switch(config)# ntp peer 10.20.10.0 switch(config)# Related Commands Command Description ntp distribute Enables CFS distribution for NTP. show ntp Displays NTP information. Cisco MDS 9000 Family Command Reference 16-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 758: Ntp Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m ntp abort To discard the Network Time Protocol (NTP) Cisco Fabric Services (CFS) distribution session in progress, use the ntp abort command in configuration mode.
Page 759: Ntp Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m ntp commit To apply the pending configuration pertaining to the Network Time Protocol (NTP) Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the ntp commit command in configuration mode.
Page 760: Ntp Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m ntp distribute To enable Cisco Fabric Services (CFS) distribution for Network Time Protocol (NTP), use the ntp distribute command. To disable this feature, use the no form of the command.
Page 761: Ntp Sync-Retry
The following example shows how to synchronize the clock in the switch. switch# ntp sync-retry Related Commands Command Description ntp distribute Enables CFS distribution for NTP. show ntp Displays NTP information. Cisco MDS 9000 Family Command Reference 16-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 762: Nwwn (Dpvm Database Configuration Submode)
The following example shows how to delete an entry from the DPVM database. switch(config-dpvm-db)# no nwwn 11:22:33:44:55:66:77:88 vsan 1 Related Commands Command Description dpvm database Configures the DPVM database. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 16-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 763: Nwwn (San Extension Configuration Mode)
The following example shows how to add an entry to the SAN extension tuner database. switch# san-ext-tuner switch(san-ext)# nwwn 20:42:00:0b:46:79:f1:80 Related Commands Command Description san-ext-tuner Enters SAN extension configuration mode. show san-ext-tuner Shows SAN extension tuner information. Cisco MDS 9000 Family Command Reference 16-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 764 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 16-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 765: O Commands
C H A P T E R O Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. Please see the Command Mode section to determine the appropriate mode for each command.
Page 766: Ocsp Url
The following example shows how to remove the URL for OCSP. switch(config-trustpoint)# no ocsp url http://admin-ca.cisco.com/ocsp Cisco MDS 9000 Family Command Reference 17-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 767 Configures a CRL or overwrites the existing one for the trust point CA. revocation-check Configures trust point revocation check methods. show crypto ca crl Displays configured CRLs. Cisco MDS 9000 Family Command Reference 17-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 768: Out-Of-Service
Putting an interface into out-of-service will cause its shared resource configuration to revert to default Do you wish to continue(y/n)? [n] The following example makes an interface available for service. switch(config-if)# no out-of-service Cisco MDS 9000 Family Command Reference 17-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 769 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description shutdown Disables an interface. show interface Displays the status of an interface. Cisco MDS 9000 Family Command Reference 17-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 770: Out-Of-Service Module
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m out-of-service module To perform a graceful shutdown of an integrated crossbar on the supervisor module of a Cisco MDS 9500 Series Director, use the out-of-service module command in EXEC mode.
Page 771: Out-Of-Service Xbar
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m out-of-service xbar To perform a graceful shutdown of the external crossbar switching module of a Cisco MDS 9513 Director, use the out-of-service xbar command in EXEC mode.
Page 772 Related Commands Command Description out-of-service module Performs a graceful shutdown of an integrated crossbar on the supervisor module of a Cisco MDS 9500 Series Director. show module Displays the status of a module. Cisco MDS 9000 Family Command Reference 17-24...
Page 773: P Commands
C H A P T E R P Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 774: Passive-Mode
The following example enables passive mode on an FCIP interface. switch# config terminal switch(config)# interface fcip 1 switch(config-if)# passive-mode Related Commands Command Description show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 18-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 775: Peer-Info Ipaddr
0 to 65535. switch(config-if)# peer-info ipaddr 10.1.1.1 port 3000 The following command deletes the assigned peer port information. switch(config-if)# no peer-info ipaddr 10.1.1.1 port 2000 Cisco MDS 9000 Family Command Reference 18-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 776 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 18-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 777: Periodic-Inventory Notification
10 Related Commands Command Description callhome Enters Call Home configuration submode. show callhome Displays Call Home configuration information. Cisco MDS 9000 Family Command Reference 18-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 778: Permit (Ipv6-Acl Configuration)
Applies the ACL to the specified destination IPv6 host address. The format is X:X:X::X. log-deny For packets that are dropped, creates an informational log message about the packet that matches the entry. The message includes the input interface. Cisco MDS 9000 Family Command Reference 18-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 779 This command was introduced. Usage Guidelines The following guidelines can assist you in configuring an IPv6-ACL. For complete information, refer to the Cisco MDS 9000 Family CLI Configuration Guide. You can apply IPv6-ACLs to VSAN interfaces, the management interface, Gigabit Ethernet •...
Page 780 List1 Related Commands Command Description ipv6 access-list Configures an IPv6 ACL and enters IPv6-ACL configuration submode. deny Configures deny conditions for an IPv6 ACL. Cisco MDS 9000 Family Command Reference 18-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 781: Phone-Contact
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 18-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 782: Ping
The following example pings the system 192.168.7.27. switch# ping 192.168.7.27 PING 192.168.7.27 (192.168.7.27): 56 data bytes 64 bytes from 192.168.7.27: icmp_seq=0 ttl=255 time=0.4 ms 64 bytes from 192.168.7.27: icmp_seq=1 ttl=255 time=0.2 ms Cisco MDS 9000 Family Command Reference 18-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 783 Timeout in seconds [2]: 1 Extended commands [n]: 3 PING 10.2.2.4 (10.2.2.4) 5(33) bytes of data. --- 10.2.2.4 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3017ms Cisco MDS 9000 Family Command Reference 18-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 784: Policy
Enters IKE configuration mode. crypto ike enable Enables the IKE protocol. show crypto ike domain ipsec Displays IKE information for the IPsec domain. Cisco MDS 9000 Family Command Reference 18-12 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 785: Port
Configures the interface using an existing profile ID from 1 to 255. interface_number use-profile profile-id show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 18-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 786: Port-Channel Persistent
10 persistent Related Commands Command Description port-channel protocol Enables the PortChannel protocol. show interface port-channel Displays PortChannel interface information. show port-channel Displays PortChannel information. Cisco MDS 9000 Family Command Reference 18-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 787: Port-License
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m port-license To make a port eligible or ineligible to acquire a port activation license on a Cisco MDS 9124 switch, use the port-license command.
Page 788: Port-Security
Specifies the VSAN ID. The range is 1 to 4093. force Forces the database activation. no-auto-learn Disables the autolearn feature for the port security database. Defaults Disabled. Command Modes Configuration mode. Cisco MDS 9000 Family Command Reference 18-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 789 The following example configures the specified pWWN to only log in through the specified fWWN. switch(config-port-security)# pwwn 20:11:00:33:11:00:2a:4a fwwn 20:81:00:44:22:00:4a:9e The following example deletes the specified pWWN configured in the previous step. Cisco MDS 9000 Family Command Reference 18-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 790 The following example forces the VSAN 1 port security database to activate despite conflicts. switch(config)# port-security activate vsan 1 force Related Commands Command Description show port-security Displays configured port security information. database Cisco MDS 9000 Family Command Reference 18-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 791: Port-Security Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m port-security abort To discard the port security Cisco Fabric Services (CFS) distribution session in progress, use the port-security abort command in configuration mode.
Page 792: Port-Security Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m port-security commit To apply the pending configuration pertaining to the port security Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the port-security commit command in configuration mode.
Page 793: Port-Security Database
1 The following example provides information on the differences between the configuration database and the active database. switch# port-security database diff config vsan 1 Cisco MDS 9000 Family Command Reference 18-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 794 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description port-security database Copies and provides information on the differences within the port security database. show port-security Displays configured port security information. database Cisco MDS 9000 Family Command Reference 18-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 795: Port-Security Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m port-security distribute To enable Cisco Fabric Services (CFS) distribution for port security, use the port-security distribute command. To disable this feature, use the no form of the command.
Page 796: Port-Security Enable
The following example shows how to disable port security. switch# config terminal switch(config)# no port-security enable Related Commands Command Description show port-security Displays port security information. Cisco MDS 9000 Family Command Reference 18-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 797: Port-Track Enable
Displays configuration and status information for a specified Fibre Channel interface. show interface Displays configuration and status information for a specified PortChannel port-channel interface. Cisco MDS 9000 Family Command Reference 18-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 798: Port-Track Force-Shut
Displays configuration and status information for a specified Fibre Channel interface. show interface Displays configuration and status information for a specified PortChannel port-channel interface. Cisco MDS 9000 Family Command Reference 18-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 799: Port-Track Interface
2 switch(config-if)# port-track interface fcip 5 Related Commands Command Description port-track enable Enables port tracking. port-track force-shut Forcefully shuts an interface for port tracking. Cisco MDS 9000 Family Command Reference 18-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 800 Displays configuration and status information for a specified Fibre Channel interface. show interface port-channel Displays configuration and status information for a specified PortChannel interface. Cisco MDS 9000 Family Command Reference 18-28 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 801: Portaddress
The following example disables a port address and retains it in the operationally down state. switch# config terminal switch(config)# ficon vsan 2 switch(config-ficon)# portaddress 1 switch(config-ficon-portaddr)# block Cisco MDS 9000 Family Command Reference 18-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 802 SampleName The following example deletes a previously configured port address name. switch(config-ficon-portaddr)# no name SampleName Related Commands Command Description show ficon Displays configured FICON details. Cisco MDS 9000 Family Command Reference 18-30 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 803: Power Redundancy-Mode
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m power redundancy-mode To configure the capacity of the power supplies on the Cisco MDS 9500 Family of switches, use the power redundancy-mode command in configuration mode. Use the no form of the command to negate the command or revert to factory defaults.
Page 804 Displays status of power supply modules, power supply redundancy mode, power and power usage summary. copy running-config Copies all running configuration to the startup configuration. startup-config Cisco MDS 9000 Family Command Reference 18-32 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 805: Poweroff Module
1 switch(config)# Related Commands Command Description show module Displays information for a specified module. copy running-config Copies all running configuration to the startup configuration. startup-config Cisco MDS 9000 Family Command Reference 18-33 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 806: Priority
The following example shows how to select the QoS policy class-map1 and configure the frame priority as high. switch(config-pmap)# class class-map1 switch(config-pmap-c)# priority high Operation in progress. Please check class-map parameters switch(config-pmap-c)# Cisco MDS 9000 Family Command Reference 18-34 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 807 Configures a QoS class map. qos policy-map Configure a QoS policy map. class Configure a QoS policy map class. show qos Displays the current QoS settings. Cisco MDS 9000 Family Command Reference 18-35 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 808: Purge Fcdomain Fcid
4 switch# The following example shows how to purge all dynamic, unused FCIDs in VSANs 4, 5, and 6. switch# purge fcdomain fcid vsan 3-5 switch# Cisco MDS 9000 Family Command Reference 18-36 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 809: Purge Module
This command cannot be issued on a supervisor module. Examples The following example displays the output of the purge module command issued on the module in slot 8. switch# purge module 8 running-config switch# Cisco MDS 9000 Family Command Reference 18-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 810: Pwc
The following example shows the present working context. switch# config t switch(config)# islb initiator ip-address 120.10.10.2 switch(config-islb-init)# pwc (config t) -> (islb initiator ip-address 120.10.10.2) Related Commands Command Description Displays the current directory location. Cisco MDS 9000 Family Command Reference 18-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 811: Pwd
The following example changes the directory and displays the current directory. switch# cd bootflash:logs switch# pwd bootflash:/logs Related Commands Command Description Changes the current directory to the specified directory. Displays the contents of a directory. Cisco MDS 9000 Family Command Reference 18-39 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 812: Pwwn (Dpvm Database Configuration Submode)
The following example shows how to delete an entry from the DPVM database. switch(config-dpvm-db)# no pwwn 11:22:33:44:55:66:77:88 vsan 1 Related Commands Command Description dpvm database Configures the DPVM database. show dpvm Displays DPVM database information. Cisco MDS 9000 Family Command Reference 18-40 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 813: Pwwn (Fcdomain Database Configuration Submode)
Creates IVR persistent FC IDs. autonomous-fabric-num native-autonomous-fabric-num Creates an IVR persistent FC ID database entry. show ivr fcdomain database Displays IVR fcdomain database entry information. Cisco MDS 9000 Family Command Reference 18-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 814: Pwwn (Sdv Virtual Device Configuration Submode)
1 switch(config-sdv-virt-dev)# pwwn 21:00:00:04:cf:cf:45:40 Related Commands Command Description sdv enable Enables or disables SAN device virtualization. show sdv statistics Displays SAN device virtualization statistics. Cisco MDS 9000 Family Command Reference 18-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 815: Chapter 19 Q Commands
C H A P T E R Q Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 816: Qos Class-Map
The following example shows how to create a QoS class map and enter class map configuration mode. switch# config terminal switch(config)# qos class-map MyClass1 switch(config-cmap)# Related Commands Command Description show qos Displays configured QoS information. Cisco MDS 9000 Family Command Reference 19-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 817: Qos Control Priority
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m qos control priority To enable the QoS priority assignment for control traffic feature on the Cisco MDS 9000 family of switches, use the qos control command in configuration mode. To revert to the factory default, use the no form of the command.
Page 818: Qos Dwrr-Q
The following example reverts to the default value of 10. switch(config)# no qos dwrr-q high weight 50 Related Commands Command Description show qos Displays configured QoS information. Cisco MDS 9000 Family Command Reference 19-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 819: Qos Enable
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m qos enable To enable the QoS priority assignment for data traffic feature on the Cisco MDS 9000 family of switches, use the qos enable command in configuration mode. To disable the QoS priority assignment for control traffic feature, use the no form of the command.
Page 820: Qos Policy-Map
The following example creates a policy map called MyPolicy and places you in the policy-map submode. switch(config)# qos policy-map MyPolicy switch(config-pmap)# Related Commands Command Description qos enable Enables the QoS data traffic feature on the switch. show qos Displays configured QoS information. Cisco MDS 9000 Family Command Reference 19-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 821: Qos Priority
10 switch(config-attribute-group)# qos priority medium Related Commands Command Description show zone-attribute-group Displays zone attribute group information. zone-attribute-group name Configures zone attribute groups. Cisco MDS 9000 Family Command Reference 19-7 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 822: Qos Service
The following example deletes a configured policy that was applied to VSAN 7. switch(config)# no qos service policy OldPolicy vsan 7 Operation in progress. Please check policy-map parameters Related Commands Command Description show qos Displays configured QoS information. Cisco MDS 9000 Family Command Reference 19-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 823: Quiesce
1. quiesce the interfaces on both switches. 2. shutdown the interfaces administratively. Do you want to continue? (y/n) [n] y Related Commands Command Description show interface Displays interface configuration and status information. Cisco MDS 9000 Family Command Reference 19-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 824 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 19-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 825: R Commands
C H A P T E R R Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 826: Radius Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m radius abort To discard a RADIUS Cisco Fabric Services (CFS) distribution session in progress, use the radius abort command in configuration mode.
Page 827: Radius Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m radius commit To apply the pending configuration pertaining to the RADIUS Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the radius commit command in configuration mode.
Page 828: Radius Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m radius distribute To enable Cisco Fabric Services (CFS) distribution for RADIUS, use the radius distribute command. To disable this feature, use the no form of the command.
Page 829: Radius-Server Deadtime
10 Related Commands Command Description deadtime Sets a time interval for monitoring a nonresponsive RADIUS server. show radius-server Displays all configured RADIUS server parameters. Cisco MDS 9000 Family Command Reference 20-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 830: Radius-Server Directed-Request
Related Commands Command Description show radius-server Displays all configured RADIUS server parameters. show radius-server Displays a directed request RADIUS server configuration. directed request Cisco MDS 9000 Family Command Reference 20-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 831: Radius-Server Host
Specifies the timeout (in seconds) between retransmissions to the RADIUS server. The default is 1 second and the valid range is 1 to 60 seconds. Cisco MDS 9000 Family Command Reference 20-7 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 832 10.10.2.3 test idle-time 10 switch(config)# radius-server host 10.10.2.3 test username tester switch(config)# radius-server host 10.10.2.3 test password 2B9ka5 Related Commands Command Description show radius-server Displays RADIUS server information. Cisco MDS 9000 Family Command Reference 20-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 833: Radius-Server Key
AnyWord switch(config)# radius-server key 0 AnyWord switch(config)# radius-server key 7 public Related Commands Command Description show radius-server Displays RADIUS server information. Cisco MDS 9000 Family Command Reference 20-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 834: Radius-Server Retransmit
The following example configures the number of retransmissions to 3. switch# config terminal switch(config)# radius-server retransmit 3 Related Commands Command Description show radius-server Displays RADIUS server information. Cisco MDS 9000 Family Command Reference 20-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 835: Radius-Server Timeout
The following example configures the timeout value to 30 seconds. switch# config terminal switch(config)# radius-server timeout 30 Related Commands Command Description show radius-server Displays RADIUS server information. Cisco MDS 9000 Family Command Reference 20-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 836: Rate-Mode Bandwidth-Fairness
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# no rate-mode bandwidth-fairness module 1 Related Commands Command Description show module Displays bandwidth fairness status. bandwidth-fairness Cisco MDS 9000 Family Command Reference 20-12 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 837: Rate-Mode Oversubscription-Limit
The following example disables restrictions on oversubscription ratios for a module (there are only dedicated ports, so a shutdown is not necessary). switch# config t switch(config)# no rate-mode oversubscription-limit module 2 Cisco MDS 9000 Family Command Reference 20-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 838 Related Commands Command Description copy running-config startup-config Saves the new oversubscription ratio configuration to the startup configuration. show port-resources module Displays the rate mode status of ports. Cisco MDS 9000 Family Command Reference 20-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 839: Reload
8 ... The following example uses reload to reboot an active supervisor module. switch# reload module 5 This command will cause supervisor switchover. (y/n)? y Cisco MDS 9000 Family Command Reference 20-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 840 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description install Installs a new software image. copy system:running-config nvram:startup-config Copies any file from a source to a destination. Cisco MDS 9000 Family Command Reference 20-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 841: Read Command-Id
100 target 22:22:22:22:22:22:22:22 transfer-size 512000 outstanding-ios 2 continuous Related Commands Command Description nport pwwn Configures a SAN extension tuner N port. san-ext-tuner Enables the SAN extension tuner feature. Cisco MDS 9000 Family Command Reference 20-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 842 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Command Description show san-ext-tuner Displays SAN extension tuner information. stop Cancels a SCSI command in progress on a SAN extension tuner N port. Cisco MDS 9000 Family Command Reference 20-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 843: Read-Only
Displays zone attribute group information. zone mode enhanced vsan Enables enhanced zoning for a VSAN. zone name Configures zone attributes. zone-attribute-group name Configures zone attribute groups. Cisco MDS 9000 Family Command Reference 20-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 844: Revocation-Check
The following example shows how to check for revoked certificates in the locally stored CRL. switch(config-trustpoint)# revocation-check crl Cisco MDS 9000 Family Command Reference 20-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 845 Configures a CRL or overwrites the existing one for the trust point CA. ocsp url Configures details of the trust point OSCP. show crypto ca crl Displays configured CRLs. Cisco MDS 9000 Family Command Reference 20-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 846: Rlir Preferred-Cond Fcid
0x654321 vsan 2 The following example removes FC ID 0x654321 as the RLIR preferred host for VSAN 2. switch# config t switch(config)# no rlir preferred-cond fcid 0x654321 vsan 2 Cisco MDS 9000 Family Command Reference 20-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 847 Displays information about RLIR, Link Incident Record Registration (LIRR), and Distribute Registered Link Incident Record (DRLIR) frames. clear rlir Clears the RLIRs. debug rlir Enables RLIR debugging. Cisco MDS 9000 Family Command Reference 20-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 848: Rmdir
Related Commands Command Description Displays a list of files on a file system. mkir Creates a new directory in the Flash file system. Cisco MDS 9000 Family Command Reference 20-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 849: Rmon Alarm
Command Modes Configuration mode. Command History Release Modification 2.0(x) This command was introduced. Usage Guidelines The events that can be triggered are configured using the rmon event command. Cisco MDS 9000 Family Command Reference 20-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 850 20 1.3.6.1.2.1.2.2.1.14.16777216 900 delta rising-threshold 15 1 falling-threshold 0 owner test Related Commands Command Description rmon event Configures an RMON event. show rmon Displays RMON configuration information. Cisco MDS 9000 Family Command Reference 20-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 851: Rmon Event
2 log trap eventtrap description CriticalErrors owner Test2 Related Commands Command Description rmon alarm Configures an RMON alarm. show rmon Displays RMON configuration information. Cisco MDS 9000 Family Command Reference 20-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 852: Role Abort
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m role abort To discard an authorization role Cisco Fabric Services (CFS) distribution session in progress, use the role abort command in configuration mode.
Page 853: Role Commit
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m role commit To apply the pending configuration pertaining to the authorization role Cisco Fabric Services (CFS) distribution session in progress in the fabric, use the role commit command in configuration mode.
Page 854: Role Distribute
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m role distribute To enable Cisco Fabric Services (CFS) distribution for authorization roles, use the role distribute command. To disable this feature, use the no form of the command.
Page 855: Role Name
Exec commands name Enter the feature name (Max Size - 32) Defaults None. Command Modes Configuration mode. Command History Release Modification 1.0(2) This command was introduced. Cisco MDS 9000 Family Command Reference 20-31 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 856 Access to Show commands and selected Exec commands Related Commands Command Description show role Displays all roles configured on the switch including the rules based on each role. Cisco MDS 9000 Family Command Reference 20-32 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 857: Rsakeypair
The following example shows how to disassociate an RSA key pair from a trust point. switch(config-trustpoint)# no rsakeypair adminid-key Cisco MDS 9000 Family Command Reference 20-33 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 858 Requests certificates for the switch’s RSA key pair created for the trust point CA. crypto key generate Configures RSA key pair information. show crypto key Displays information about configured RSA key pairs. mypubkey rsa Cisco MDS 9000 Family Command Reference 20-34 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 859: Rscn
The following example configures RSCNs in multi-PID format. switch# config terminal switch(config)# rscn multi-pid vsan 1 Related Commands Command Description show rscn src-table Displays state change registration table, show rscn statistics Displays RSCN statistics. Cisco MDS 9000 Family Command Reference 20-35 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 860: Rscn Abort Vsan
Enables the distribution of an RSCN configuration. rscn event-tov Configures an RSCN event timeout. clear rscn session vsan Clears the RSCN session for a specified VSAN. show rscn Displays RSCN configuration information. Cisco MDS 9000 Family Command Reference 20-36 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 861: Rscn Commit Vsan
Enables the distribution of an RSCN configuration. rscn event-tov Configures an RSCN event timeout. clear rscn session vsan Clears the RSCN session for a specified VSAN. show rscn Displays RSCN configuration information. Cisco MDS 9000 Family Command Reference 20-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 862: Rscn Distribute
The RSCN timer configuration must be the same on all switches in the VSAN; otherwise, the link will not come up. Cisco Fabric Service (CFS) automatically distributes the RSCN timer configuration to all switches in a fabric. Only the RSCN timer configuration distributed.
Page 863: Rscn Event-Tov
Before changing the timeout value, you must enable RSCN configuration distribution using the rscn distribute command. The RSCN timer is registered with Cisco Fabric Services (CFS) during initialization and switchover. For high availability, if the RSCN timer distribution crashes and restarts or a switchover occurs, it resumes normal functionality from the state prior to the crash or switchover.
Page 864 Applies a pending RSCN configuration. rscn distribute Enables distribution of an RSCN configuration. clear rscn session vsan Clears the RSCN session for a specified VSAN. show rscn Displays RSCN configuration information. Cisco MDS 9000 Family Command Reference 20-40 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 865: Run-Script
In response to the run-script command, this is the file output: switch# run-script slot0:testfile 'conf t' Enter configuration commands, one per line. End with CNTL/Z. 'interface fc 1/1' 'no shutdown' 'end' Cisco MDS 9000 Family Command Reference 20-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 866 # show interface $(var1) $(var2) ------------------------------------------------------------------------------- Interface Vsan Admin Admin Status SFP Oper Oper Port Mode Trunk Mode Speed Channel Mode (Gbps) ------------------------------------------------------------------------------- fc1/1 1 auto on sfpAbsent -- -- -- Cisco MDS 9000 Family Command Reference 20-42 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 867: Rspan-Tunnel
The following example configures an interface to associate and bind the ST port with the RSPAN tunnel and enables traffic flow trough this interface.. switchS# config t switchS(config)# interface fc2/1 switchS(config-if)# rspan-tunnel interface fc-tunnel 100 switchS(config-if)# no shutdown Cisco MDS 9000 Family Command Reference 20-43 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 868 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Cisco MDS 9000 Family Command Reference 20-44 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 869: S Commands
C H A P T E R S Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 870: San-Ext-Tuner Enable
For example, GE 1/1 and GE 1/2 would be a valid pair, while GE 2/2 and GE 2/3 would not. This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP Note c-Class BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Page 871 Displays the parameters and statistics of interfaces currently operating in netsim ingress network simulation mode for the specified direction of traffic. Cisco MDS 9000 Family Command Reference 21-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 872: Santap Module
Specifies the I/O timeout value. The range is 10 to 200 seconds, with the timeout-value default being 10 seconds. Defaults Disabled. The IO-timeout is 10 seconds. Lun-size-handling is Enabled. Command Modes Configuration mode. Cisco MDS 9000 Family Command Reference 21-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 873 1 appl-vsan 1 Related Commands Command Description ssm enable feature Enables the SANTap feature on the SSM. show santap module Displays the configuration and statistics of the SANTap feature. Cisco MDS 9000 Family Command Reference 21-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 874: Scheduler Aaa-Authentication
7 newpwd2 The following example specifies a remote user’s name and AAA authentication password. switch# config ts switch(config)# scheduler aaa-authentication username admin1 password newpwd3 Cisco MDS 9000 Family Command Reference 21-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 875 Enables and disables the scheduler. show scheduler Shows the scheduler configuration or data. scheduler job Defines a job. scheduler logfile Configures a scheduler log file. scheduler schedule Defines a schedule. Cisco MDS 9000 Family Command Reference 21-7 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 876: Scsi-Flow Distribute
Related Commands Command Description ssm enable feature Enables the SCSI flow feature on the SSM. show santap module Displays SCSI flow configuration and status. Cisco MDS 9000 Family Command Reference 21-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 877: Scsi-Flow Flow-Id
You must enable the SCSI flow feature on the Storage Services Module (SSM) before you can configure a SCSI flow. Use the ssm enable feature module slot-number command to enable the SCSI flow feature on the SSM. Cisco MDS 9000 Family Command Reference 21-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 878 4 write-acceleration Related Commands Command Description ssm enable feature Enables the SCSI flow feature on the SSM. show scsi-flow Displays SCSI flow configuration and status. Cisco MDS 9000 Family Command Reference 21-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 879: Scsi-Target
The following example removes SCSI target auto-polling discovery for VSAN 1. switch# config t switch(config)# no scsi-target auto-poll vsan 1 The following example configures a SCSI target discovery. switch# config t switch(config)# scsi-target discovery Cisco MDS 9000 Family Command Reference 21-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 880 Description discover scsi-target Discovers SCSI targets on local storage to the switch or remote storage across the fabric. show scsi-target Displays information about existing SCSI target configurations. Cisco MDS 9000 Family Command Reference 21-12 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 881: Sdv Abort Vsan
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# sdv abort vsan 2 Related Commands Command Description show sdv database Displays the SDV database. sdv enable Enables SDV. Cisco MDS 9000 Family Command Reference 21-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 882: Sdv Commit Vsan
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# no sdv commit vsan 2 Related Commands Command Description show sdv database Displays the SDV database. sdv enable Enables SDV. Cisco MDS 9000 Family Command Reference 21-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 883: Sdv Enable
Enter configuration commands, one per line. End with CNTL/Z. switch(config)# no sdv enable Related Commands Command Description show sdv database Displays the SDV database. show vritual-device Displays the virtual devices. Cisco MDS 9000 Family Command Reference 21-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 884: Sdv Virtual-Device Name
The following example shows how to remove the virtual device name. switch# config t Enter configuration commands, one per line. End with CNTL/Z. switch(config)# no sdv virtual-device name vdev1 vsan 2 Cisco MDS 9000 Family Command Reference 21-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 885 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show sdv database Displays the SDV database. sdv enable Enables SDV. Cisco MDS 9000 Family Command Reference 21-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 886: Send
Shutting down the system in 2 minutes. Please log off. Broadcast Message from admin@excal-112 (/dev/pts/3) at 16:50 ... Shutting down the system in 2 minutes. Please log off. Cisco MDS 9000 Family Command Reference 21-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 887: Server
AdminProfile switch(config-isns-profile)# no server 10.2.2.2 Related Commands Command Description isns-server enable Enables the iSNS server. isns profile name Creates iSNS profiles. show isns Displays iSNS information. Cisco MDS 9000 Family Command Reference 21-19 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 888: Server (Radius Configuration)
Related Commands Command Description radius-server host Configures RADIUS server parameters. show radius-server Displays RADIUS server configuration parameters. Cisco MDS 9000 Family Command Reference 21-20 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 889: Server (Tacacs+ Configuration)
Related Commands Command Description tacacs-server host Configures TACACS+ server parameters. show tacacs-server Displays TACACS+ server configuration parameters. Cisco MDS 9000 Family Command Reference 21-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 890: Set (Ipsec Crypto Map Configuration Submode)
PFS is disabled by default. When it is enabled without a group parameter, the default is group1. The security association lifetime defaults to global setting configured by the crypto global domain ipsec security-association lifetime command. Command Modes IPsec crypto map configuration submode. Cisco MDS 9000 Family Command Reference 21-22 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 891 Configures the global security association lifetime value. security-association lifetime crypto ipsec enable Enables IPsec. show crypto map domain ipsec Displays IPsec crypto map information. Cisco MDS 9000 Family Command Reference 21-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 892: Setup
This command was introduced. Usage Guidelines Refer to the Cisco MDS 9000 Family CLI Configuration Guide for more information on using the setup command. The setup utility guides you through the basic configuration process. Type Ctrl-c at any prompt to skip the remaining configuration options and proceed with what is configured to that point.
Page 893: Setup Ficon
This command was introduced. Usage Guidelines Refer to the Cisco MDS 9000 Family CLI Configuration Guide for more information on using the setup ficon command. The setup utility guides you through the basic configuration process. Type Ctrl-c at any prompt to skip the remaining configuration options and proceed with what is configured to that point.
Page 894: Shutdown
0 switch(config-if)# shutdown The following example shows how to forcefully disable the mgmt 0 interface. switch# config terminal switch(config)# interface mgmt 0 switch(config-if)# shutdown force Cisco MDS 9000 Family Command Reference 21-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 895 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description interface Specifies an interface and enters interface configuration submode. show interface Displays interface information. Cisco MDS 9000 Family Command Reference 21-27 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 896: Site-Id
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 21-28 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 897: Sleep
10 seconds before executing the show scsi-target disk command. The following example shows how to delay the switch prompt return. switch# sleep 30 You will see the switch prompt return after 30 seconds. Cisco MDS 9000 Family Command Reference 21-29 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 898: Snmp Port
The following example allows SNMP users to configure FICON parameters (default). switch(config-ficon)# snmp port control Related Commands Command Description show ficon Displays configured FICON details. ficon vsan vsan-id Enables FICON on the specified VSAN. Cisco MDS 9000 Family Command Reference 21-30 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 899: Snmp-Server
The following example sets the contact information, switch location, and switch name. switch# config terminal switch(config)# snmp-server contact NewUser switch(config)# no snmp-server contact NewUser switch(config)# snmp-server location SanJose switch(config)# no snmp-server location SanJose Cisco MDS 9000 Family Command Reference 21-31 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 900 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show snmp Displays SNMP information. Cisco MDS 9000 Family Command Reference 21-32 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 901: Snmp-Server Enable Traps
To disable the SNMP server notifications, use the no form of the command. snmp-server enable traps [entity [fru] | fcc | fcdomain | fcns | fdmi | fspf | license | link [cisco | ietf [cisco] | ietf-extended [cisco]] | port-security | rscn [els | ils] | snmp [authentication] |...
Page 902 • ifLinkUpDownTrapEnable (defined in IF-MIB) is enabled for that interface. In addition to the varbinds defined in the trap definition, varbinds defined in the IF-MIB specific to the Cisco Systems implementation are sent. This is the default setting. IETF cisco—Traps (linkUp, linkDown) defined in IF-MIB and traps (cieLinkUp, cieLinkDown) •...
Page 903 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m The following example enables (default) only standard extended linkUp/linkDown notifications. switch# config t switch(config)# snmp-server enable traps link The following example enables only Cisco Systems defined cieLinkUp/cieLinkDown notifications. switch# config terminal switch(config)# snmp-server enable traps link cisco Related Commands...
Page 904: Snmp-Server Globalenforcepriv
The following example enables globally enforced privacy for all SNMP users. switch# config t Enter configuration commands, one per line. End with CNTL/Z. switch(config)# snmp-server globalEnforcePriv Related Commands Command Description show snmp Displays SNMP information. Cisco MDS 9000 Family Command Reference 21-36 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 905: Snmp-Server Host
If you use the version keyword, one of the following must be specified: 1, 2c, or 3. Examples The following example specify the recipient of an SNMP notification. switch# config terminal switch(config)# snmp-server host 10.1.1.1 traps version 2c abcddsfsf udp-port 500 Cisco MDS 9000 Family Command Reference 21-37 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 906 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show snmp Displays SNMP information. snmp-server host Configures SNMP server host information. Cisco MDS 9000 Family Command Reference 21-38 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 907: Snmp-Server Tcp-Session
The following example enables one time authentication for SNMP over a TCP session. switch# config t Enter configuration commands, one per line. End with CNTL/Z. switch(config)# snmp-server tcp-session auth Related Commands Command Description show snmp Displays SNMP information. Cisco MDS 9000 Family Command Reference 21-39 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 908: Snmp-Server User
If a configuration file is copied into the device, the passwords may not be set correctly if the configuration file was generated at a different device. We recommend that passwords be explicitly configured to the desired passwords after copying the configuration into the device. Cisco MDS 9000 Family Command Reference 21-40 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 909 0xab0211gh priv 0x45abf342 localizedkey Related Commands Command Description role name Configures role profiles. show snmp Displays SNMP information. snmp-server host Configures SNMP server host information. Cisco MDS 9000 Family Command Reference 21-41 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 910: Source
| target}] | traffic-type {initiator | mgmt | target}]} | vsan vsan-id} Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM BladeCenter, the syntax differs as follows: interface {bay port | ext port}...
Page 911 9000 Family switch. bay port | ext port (Optional) Configures the Fibre Channel interface on a port on a Cisco Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric Switch for IBM BladeCenter. The range is 0 to 48.
Page 912 Selects or configures the SPAN session and changes to SPAN configuration submode. destination interface Configures a SPAN destination interface. suspend Suspends a SPAN session. show span session Displays specific information about a SPAN session Cisco MDS 9000 Family Command Reference 21-44 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 913: Span Session
Configures a SPAN destination interface. source Configures a SPAN source. suspend Suspends a SPAN session. show span session Displays specific information about a SPAN session Cisco MDS 9000 Family Command Reference 21-45 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 914: Special-Frame
1 switch(config)# special-frame peer-pwwn 11:11:11:11:11:11:11:11 switch(config)# special-frame peer-pwwn 22:22:22:22:22:22:22:22 profile-id 10 Related Commands Command Description show interface fcip Displays an interface configuration for a specified FCIP interface. Cisco MDS 9000 Family Command Reference 21-46 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 915: Ssh
The following example shows how to initiate an SSH session using a user name host name. switch# ssh user1@host1 user1@1host1's password: Related Commands Command Description show ssh key Displays SSH key information. ssh server enable Enables SSH server. Cisco MDS 9000 Family Command Reference 21-47 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 916: Ssh Key
1024 generating rsa key..generated rsa key switch(config)# switch(config)# no ssh key cleared RSA keys switch(config)# Cisco MDS 9000 Family Command Reference 21-48 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 917 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description show ssh key Displays SSH key information. ssh server enable Enables SSH server. Cisco MDS 9000 Family Command Reference 21-49 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 918: Ssh Server Enable
The following example disables the SSH server. switch# config terminal switch(config)# no ssh server enable updated Related Commands Command Description show ssh server Displays SSH server information. ssh key Generates an SSH key. Cisco MDS 9000 Family Command Reference 21-50 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 919: Ssm Enable Feature
Configures the Fibre Channel interface range of ports. See the usage guidelines for this command for a list of interface range restrictions. Defaults Disabled. Command Modes Configuration mode. Cisco MDS 9000 Family Command Reference 21-51 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 920 4/1-4 The following example enables the NSP feature on the SSM in slot 4. switch(config) ssm enable feature nsp module 4 Cisco MDS 9000 Family Command Reference 21-52 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 921 The following example enables the SCSI flow feature on the SSM in slot 4. switch(config) ssm enable feature scsi-flow module 4 Related Commands Command Description scsi-flow distribute Configures the SCSI flow services. show scsi-flow Displays SCSI flow configuration and status. Cisco MDS 9000 Family Command Reference 21-53 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 922: Static (Iscsi Initiator Configuration And Islb Initiator Configuration)
The following example uses the switch WWN pool to allocate the nWWN for this iSCSI initiator and to keep it persistent. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# iscsi initiator name iqn.1987-02.com.cisco.initiator switch(config-iscsi-init)# static nWWN system-assign Cisco MDS 9000 Family Command Reference 21-54 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 923 Displays iSLB initiator information for the specified configured initiator. configured show islb initiator Displays detailed iSLB initiator information. detail show islb initiator Displays iSLB initiator summary information. summary Cisco MDS 9000 Family Command Reference 21-55 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 924: Stop
Enables the SAN extension tuner feature. show san-ext-tuner Displays SAN extension tuner information. write command-id Configures a SCSI write command for a SAN extension tuner N port. Cisco MDS 9000 Family Command Reference 21-56 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 925: Streetaddress
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 21-57 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 926: Suspend
Ingress (rx) sources are fc3/13, Egress (tx) sources are fc3/13, switch(config-span)# The following example shows how to disable the suspension of the SPAN session. switch(config-span)# no suspend Cisco MDS 9000 Family Command Reference 21-58 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 927 Selects or configures the SPAN session and changes to SPAN configuration submode. destination interface Configures a SPAN destination interface. source Configures a SPAN source. show span session Displays specific information about a SPAN session. Cisco MDS 9000 Family Command Reference 21-59 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 928: Switch-Priority
Related Commands Command Description callhome Configures the Call Home function. callhome test Sends a dummy test message to the configured destination(s). show callhome Displays configured Call Home information. Cisco MDS 9000 Family Command Reference 21-60 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 929: Switch-Wwn
28:1d:00:05:30:00:06:ea autonomous-fabric-id 14 vsan-ranges 1-4 The following example adds a switch WWN and the default AFID to the AFID database. switch(config-afid-db)# switch-wwn 28:1d:00:05:30:00:06:ea default-autonomous-fabric-id Cisco MDS 9000 Family Command Reference 21-61 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 930 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description autonomous-fabric-id- Enters AFID database configuration submode. database show Displays the contents of the AFID database. autonomous-fabric-id- database Cisco MDS 9000 Family Command Reference 21-62 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 931: Switchname
The following example changes the name of the switch to the default. myswitch1(config)# no switchname Related Commands Command Description snmp-server Sets the contact information, switch location, and switch name within the limit of 20 characters (without spaces). Cisco MDS 9000 Family Command Reference 21-63 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 932: Switchport
Configures receive BB_credit for E or TE port mode. Configures receive BB_credit for F or FL port mode. default Configures default receive BB_credits depending on the port mode and capabilities. Cisco MDS 9000 Family Command Reference 21-64 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 933 Enables promiscuous mode. duplex Configures the port duplex mode. auto Configures auto negotiate duplex mode. full Specifies full duplex mode half Configures half duplex mode. Configures 10-Mbps port speed. Cisco MDS 9000 Family Command Reference 21-65 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 934 For example, if an interface is configured for autosensing (auto), then 4 Gbps of bandwidth is reserved even though the maximum operating speed Cisco MDS 9000 Family Command Reference 21-66...
Page 935 • When adding a PortChannel to a configuration that uses both Generation-1 and Generation-2 • modules, configure the PortChannel and Generation-2 interface speed to auto max 2000. Cisco MDS 9000 Family Command Reference 21-67 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 936 Related Commands Command Description fcrxbbcredit extended Enables extended BB_credits on the switch. enable show interface Displays an interface configuration for a specified interface. Cisco MDS 9000 Family Command Reference 21-68 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 937: Switchport Auto-Negotiate
The following example disable auto-negotiation on a Gigabit Ethernet interface. switch(config-if)# no switchport auto-negotiate Related Commands Command Description show interface Displays an interface configuration for a specified Gigabit Ethernet gigabitethernet interface. Cisco MDS 9000 Family Command Reference 21-69 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 938: Switchport Ignore Bit-Errors
Regardless of the setting of the switchport ignore bit-errors command, the switch generates a syslog Note message when bit error threshold events are detected. Cisco MDS 9000 Family Command Reference 21-70 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 939 The following example shows how to allow the detection of bit error events from disabling the interface. switch# config t switch(config)# interface fc1/1 switch(config-if)# no switchport ignore bit-errors Related Commands Command Description show interface Displays interface information. Cisco MDS 9000 Family Command Reference 21-71 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 940: Switchport Ingress-Rate
• The QoS feature is enabled using the qos enable command. The command is issued in a Cisco MDS 9100 series switch. • Examples The following example configures the ingress rate limit on a Fibre Channel interface.
Page 941: Switchport Initiator Id
2/5 switch(config-if)# switchport initiator id ip-address switch(config-if)# switchport initiator name Related Commands Command Description show interface iscsi Displays an interface configuration for a specified iSCSI interface. Cisco MDS 9000 Family Command Reference 21-73 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 942: Switchport Promiscuous-Mode
The following example disables promiscuous mode on a Gigabit Ethernet interface. switch(config-if)# no switchport promiscuous-mode Related Commands Command Description show interface Displays an interface configuration for a specified Gigabit Ethernet gigabitethernet interface. Cisco MDS 9000 Family Command Reference 21-74 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 943: Switchport Proxy-Initiator
11:11:11:11:11:11:11:11 pwwn 22:22:22:22:22:22:22:22 The following example configures the iSCSI proxy initiator mode for a iSCSI interface without WWNs. switch# config terminal switch(config)# interface iscsi 2/5 switch(config-if)# switchport proxy-initiator Cisco MDS 9000 Family Command Reference 21-75 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 944 The following example deletes the iSCSI proxy initiator mode for a iSCSI interface. switch(config-if)# switchport proxy-initiator Related Commands Command Description show interface iscsi Displays an interface configuration for a specified iSCSI interface. Cisco MDS 9000 Family Command Reference 21-76 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 945: System Cores
The following example disables periodic copying core and log files. switch(config)# no system cores Related Commands Command Description show system cores Displays the currently configured scheme for copying cores. Cisco MDS 9000 Family Command Reference 21-77 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 946: System Default Switchport
This command does not affect non-F ports that are up; however, if non-F ports are down, this command changes the administrative mode of those ports. Examples The following example shows how to configure port shutdown. switch# config terminal switch(config)# system default switchport shutdown Cisco MDS 9000 Family Command Reference 21-78 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 947 F Related Commands Command Description show system default Displays default values for switch port attributes. switchport show interface brief Displays FC port modes. Cisco MDS 9000 Family Command Reference 21-79 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 948: System Default Zone Default-Zone Permit
Defines whether a default zone (nodes not assigned a created zone) permits permit vsan or denies access to all in the default zone. show system default Displays default values for the default zone. zone Cisco MDS 9000 Family Command Reference 21-80 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 949: System Default Zone Distribute Full
Distributes the operational values for the default zone to all zone sets. vsan show system default Displays default values for the default zone. zone Cisco MDS 9000 Family Command Reference 21-81 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 950: System Default Zone Mode Enhanced
Related Commands Command Description show system default Displays the default value of zone mode as basic and enhanced. zone Cisco MDS 9000 Family Command Reference 21-82 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 951: System Hap-Reset
You can disable the HA policy supervisor reset feature (enabled by default) for debugging and troubleshooting purposes. Examples The following example enables the supervisor reset HA policy. switch# system hap-reset Cisco MDS 9000 Family Command Reference 21-83 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 952: System Health (Configuration Mode)
{frame-length {bytes | auto} | frequency seconds}] no system health [failure-action | interface {fc slot/port | iscsi slot/port}] On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM Note BladeCenter, the syntax differs as follows:...
Page 953 Explicitly runs an internal OHMS loopback test on demand for a specified internal-loopback interface or module. system health Explicitly runs an internal OHMS Serializer/Deserializer (Serdes) loopback serdes-loopback test on demand for a Fibre Channel interface. Cisco MDS 9000 Family Command Reference 21-85 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 954: System Health Cf-Crc-Check
The following example shows how to run the CRC checksum test on demand. switch# system health cf-crc-check module 4 Related Commands Command Description show system health Displays system health information. show system health Displays system health statistics. statistics Cisco MDS 9000 Family Command Reference 21-86 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 955: System Health Cf-Re-Flash
The following example shows how to update firmware on demand. switch# system health cf-re-flash module 4 Related Commands Command Description show system health Displays system health information. show system health Displays system health statistics. statistics Cisco MDS 9000 Family Command Reference 21-87 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 956: System Health Clear-Errors
[battery-charger | bootflash | cache-disk | eobc | inband | loopback | mgmt] On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM Note BladeCenter, the syntax differs as follows:...
Page 957 3 The following example clears the management port test error history for the specified module. switch# system health clear-errors module 2 mgmt Cisco MDS 9000 Family Command Reference 21-89 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 958: System Health External-Loopback
{interface fc slot/port | source interface fc slot/port destination fc slot/port} [frame-length bytes [frame-count number] | frame-count number] [force] On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM Note...
Page 959 Explicitly runs an internal OHMS loopback test on demand for a specified internal-loopback interface or module. system health Explicitly runs an internal OHMS Serializer/Deserializer (Serdes) loopback serdes-loopback test on demand for a Fibre Channel interface. Cisco MDS 9000 Family Command Reference 21-91 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 960: System Health Internal-Loopback
{fc slot/port | iscsi slot/port} [frame-length bytes [frame-count number] | frame-count number] On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM Note BladeCenter, the syntax differs as follows:...
Page 961 Explicitly runs an external OHMS loopback test on demand for a specified external-loopback interface or module. system health Explicitly runs an internal OHMS Serializer/Deserializer (Serdes) loopback serdes-loopback test on demand for a Fibre Channel interface. Cisco MDS 9000 Family Command Reference 21-93 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 962: System Health Module
Configures the inband test on the specified module. loopback Configures the loopback test on the specified module. mgmt Configures the management port test on the specified module. Cisco MDS 9000 Family Command Reference 21-94 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 963 6 bootflash failure-action System health failure action for module 6 Bootflash test is now enabled. The following example enables an already-enabled bootflash test. Cisco MDS 9000 Family Command Reference 21-95 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 964 Enter configuration commands, one per line. End with CNTL/Z. switch(config)# system health module # cf-re-flash failure-action Related Commands Command Description show system health Displays system health information. show system health Displays system health statistics. statistics Cisco MDS 9000 Family Command Reference 21-96 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 965: System Health Serdes-Loopback
[frame-length bytes [frame-count number] | frame-count number] [force] On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM Note BladeCenter, the syntax differs as follows:...
Page 966 Explicitly runs an external OHMS loopback test on demand for a specified external-loopback interface or module. system health To explicitly run an internal OHMS loopback test on demand for a specified internal-loopback interface or module. Cisco MDS 9000 Family Command Reference 21-98 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 967: System Heartbeat
You can disable the heartbeat checking feature (enabled by default) for debugging and troubleshooting purposes like attaching a GDB to a specified process. Examples The following example enables the system heartbeat checks. switch# system heartbeat Cisco MDS 9000 Family Command Reference 21-99 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 968: System Memlog
Modification 1.0(2) This command was introduced. Usage Guidelines Use this command for debugging and troubleshooting purposes. Examples The following example enables system memory logging. switch# system memlog Cisco MDS 9000 Family Command Reference 21-100 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 969: System Startup-Config
Examples The following example releases the system configuration lock with identifier 1. switch# system startup-config unlock 1 Related Commands Command Description show system Displays system information. Cisco MDS 9000 Family Command Reference 21-101 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 970: System Statistics Reset
You can disable the system statistics reset feature (enabled by default) for debugging and troubleshooting purposes. Examples The following example resets the HA statistics. switch# system statistics reset Cisco MDS 9000 Family Command Reference 21-102 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 971: System Switchover (Exec Mode)
Determines version compatibility between switching modules. compatibility show module Displays the HA-standby state for the standby supervisor module. show system Determines whether the system is ready to accept a switchover. redundancy status Cisco MDS 9000 Family Command Reference 21-103 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 972: System Switchover (Configuration Mode)
Usage Guidelines None. Examples The following example enables a HA switchover from an active supervisor module to a standby supervisor module. switch# config terminal switch(config)# system switchover ha Cisco MDS 9000 Family Command Reference 21-104 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 973: System Trace
Usage Guidelines This command is used for debugging purposes. Examples The following example shows how to configure the system trace level. switch# config terminal switch(config)# system trace 0xff Cisco MDS 9000 Family Command Reference 21-105 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 974: System Watchdog
You can disable the watchdog checking feature (enabled by default) for debugging and troubleshooting purposes like attaching a GDB or a kernel GDB (KGDB) to a specified process. Examples The following example enables the system watchdog. switch# system watchdog Cisco MDS 9000 Family Command Reference 21-106 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 975: Chapter 22 Show Commands
C H A P T E R Show Commands The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric switches. All commands are shown here in alphabetical order regardless of command mode. See the “Command Modes”...
Page 976: Show Aaa Accounting
None. Examples The following example displays accounting log configuration. switch# show aaa accounting default: local Related Commands Command Description aaa accounting default Configure the default accounting method Cisco MDS 9000 Family Command Reference 22-2 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 977: Show Aaa Authentication
The following example displays the authentication login error message enable configuration. switch# show aaa authentication login error-enable disabled The following example displays the authentication login MS-CHAP enable configuration. switch# show aaa authentication login mschap disabled Cisco MDS 9000 Family Command Reference 22-3 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 978: Show Aaa Authentication Login Password-Aging
The following example displays the status of the password aging notification. switch(config)# show aaa authentication login password-aging Related Commands Command Description aaa authentication Configures the password aging notification from AAA server. login password-aging enable Cisco MDS 9000 Family Command Reference 22-4 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 979: Show Aaa Groups
Command Modes EXEC mode. Command History Release Modification 1.3(1) This command was introduced. Usage Guidelines None. Examples To display configured server groups. switch# show aaa groups radius TacServer Cisco MDS 9000 Family Command Reference 22-5 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 980: Show Accounting Log
8 22:06:59 1981:start:/dev/pts/2_376697219:admin: Tue Dec 8 22:07:03 1981:stop:/dev/pts/2_376697219:admin:shell terminated Tue Dec 8 22:07:13 1981:start:/dev/pts/2_376697233:admin: Tue Dec 8 22:07:53 1981:stop:/dev/pts/2_376697233:admin:shell terminated Tue Dec 8 22:08:15 1981:update:/dev/ttyS0_376628597:admin:iSCSI Interface Vsan Enabled Cisco MDS 9000 Family Command Reference 22-6 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 981 S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m Related Commands Command Description clear accounting log Clears the accounting log. Cisco MDS 9000 Family Command Reference 22-7 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 982: Show Arp
Age (min) Hardware Addr Type Interface Internet 171.1.1.1 0006.5bec.699c ARPA mgmt0 Internet 172.2.0.1 0000.0c07.ac01 ARPA mgmt0 Related Commands Command Description clear arp-cache Clears the arp-cache table entries. Cisco MDS 9000 Family Command Reference 22-8 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 983: Show Autonomous-Fabric-Id Database
SWITCH WWN Default-AFID -------------------------------------------------------------- 20:00:00:0c:91:90:3e:80 Total: 1 entry in default AFID table SWITCH WWN AFID VSANS -------------------------------------------------------------- 20:00:00:0c:91:90:3e:80 1,2,5-8 Total: 1 entry in AFID table Cisco MDS 9000 Family Command Reference 22-9 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 984 Configures an autonomous fabric ID into the IVR service group. (IVR service group configuration) autonomous-fabric-id- Configures an autonomous fabric ID (AFID) database database Cisco MDS 9000 Family Command Reference 22-10 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 985: Show Banner Motd
The configured message is visible the next time you log in to the switch: Testing the MOTD Feature switch login: Related Commands Command Description banner motd Configures the required banner message. Cisco MDS 9000 Family Command Reference 22-11 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 986: Show Boot
Module 2 asm-sfn variable = bootflash:/asm-image The following example displays a list of all boot variables. switch# show boot variables List of boot variables are: asm-sfn system kickstart Cisco MDS 9000 Family Command Reference 22-12 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 987: Show Boot Auto-Copy
This command only displays files on the active supervisor module. switch# show boot auto-copy list File: /bootflash/ilc1.bin Bootvar: ilce File:/bootflash/lasilc1.bin Bootvar: lasilc Cisco MDS 9000 Family Command Reference 22-13 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 988: Show Boot Auto-Copy
The following example displays a typical message when the auto-copy option is disabled or if no files are copied. switch# show boot auto-copy list No file currently being auto-copied Cisco MDS 9000 Family Command Reference 22-14 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 989: Show Callhome
None. Examples The following example displays configured Call Home information. switch# show callhome callhome enabled Callhome Information: contact person name:who@where contact person's email:person@place.com contact person's phone number:310-408-4000 Cisco MDS 9000 Family Command Reference 22-15 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 990 The following example displays e-mail and SMTP information. switch# show callhome transport-email from email addr:user@company1.com reply to email addr:pointer@company.com return receipt email addr:user@company1.com smtp server:server.company.com smtp server port:25 Cisco MDS 9000 Family Command Reference 22-16 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 991 Description alert-group Customizes a Call Home alert group with user-defined show commands. callhome Configures Call Home. callhome test Sends a dummy test message to the configured destination(s). Cisco MDS 9000 Family Command Reference 22-17 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 992: Show Cdp
Command History Release Modification 1.1(1) This command was introduced. Usage Guidelines This command is allowed only on the active supervisor module in the Cisco MDS 9500 Series. Cisco MDS 9000 Family Command Reference 22-18 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 993 ---------------------------------------- Device ID:Switch System Name: Interface address(es): Platform: cisco WS-C2950T-24, Capabilities: Switch IGMP Filtering Interface: mgmt0, Port ID (outgoing port): FastEthernet0/24 Holdtime: 152 sec Version: Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc2) Copyright (c) 1986-2004 by cisco Systems, Inc.
Page 994 CDP neighbor detail ---------------------------------------- Device ID:Switch System Name: Interface address(es): Platform: cisco WS-C2950T-24, Capabilities: Switch IGMP Filtering Interface: mgmt0, Port ID (outgoing port): FastEthernet0/24 Holdtime: 137 sec Version: Cisco Internetwork Operating System Software IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(19)EA1c, RELEASE SOFTWARE (fc2) Copyright (c) 1986-2004 by cisco Systems, Inc.
Page 995 Invalid CDP Packets: 0 Unsupported Version: 0 Checksum Errors: 0 Malformed Packets: 0 Output Statistics: Total Packets: 674 CDP v1 Packets: 0 CDP v2 Packets: 674 Send Errors: 0 Cisco MDS 9000 Family Command Reference 22-21 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 996: Show Cfs
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m show cfs To display Cisco Fabric Services (CFS) information, use the show cfs command. show cfs {application [name app-name] | lock [name app-name] | merge status name app-name]...
Page 997 20:00:00:05:30:00:61:de 172.22.46.223 20:00:00:05:30:00:cb:56 172.22.46.224 20:00:00:05:30:00:eb:46 172.22.46.222 20:00:00:05:30:00:f1:e2 172.22.46.225 The following example shows whether or not CFS distribution is enabled. switch# show cfs status Fabric distribution Enabled switch# Cisco MDS 9000 Family Command Reference 22-23 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 998: Show Cfs Regions
Total number of entries = 3 Region-ID Application: ntp Scope : Physical-all ------------------------------------------------------------------------- Switch WWN IP Address ------------------------------------------------------------------------- 20:00:00:0d:ec:06:55:c0 10.64.66.47 [Local] switch-1 Total number of entries = 1 Cisco MDS 9000 Family Command Reference 22-24 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 999: Show Cfs Regions
1 Total number of entries = 1 Related Commands Command Description cfs regions Creates a region that restricts the scope of application distribution to a selected switch. Cisco MDS 9000 Family Command Reference 22-25 OL-8413-07, Cisco MDS SAN-OS Release 3.x...
Page 1000: Show Cimserver
The following example displays the CIM server HTTPS status. switch# show cimserver httpsstatus cimserver Https is enabled The following example displays the CIM server HTTP status. switch# show cimserver httpstatus cimserver Http is not enabled Cisco MDS 9000 Family Command Reference 22-26 OL-8413-07, Cisco MDS SAN-OS Release 3.x...

Cisco MDS 9000 series Command Reference Manual

CHAPTER 2 A Commands

Abort

Arp

Attach

Chapter 3 B Commands

Boot

Chapter 4 C Commands

Cdp

Class

Clock

Commit

Copy

D Commands

Chapter 5 D Command

Dir

Dscp

Chapter 6 Debug Commands

Quick Links

Related Manuals for Cisco MDS 9000 series

Summary of Contents for Cisco MDS 9000 series