Miele CS 1326 Operating And Installation Instructions
Tepanyaki
Hide thumbs
Also See for CS 1326:
- Operating and installation manual (36 pages) ,
- Operating and installation manual (36 pages)
Related Manuals for Miele CS 1326
Summary of Contents for Miele CS 1326
- Page 1 Operating and Installation Instructions TepanYaki CS 1326 en - CA To prevent accidents and machine damage, read the Operating Manual before installation or use. M.-Nr. 07 374 430...
-
Page 3: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 4 Guide to the Tepan Yaki ..........7 Before using for the first time. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Correct usage WARNING- When using your Only use the Tepan Yaki for appliance follow basic residential cooking, and for the precautions, including the purposes described in this manual. following: Other uses are not permitted and can be dangerous. The manufacturer will Read all instructions before not be held liable for damage caused installation or use to prevent... - Page 5 Install the appliance so that the power cord does not come into contact Installation, repair and maintenance with any portion of the appliance which work should be performed by a Miele may become hot during use. authorized service technician. Work by unqualified persons could be Before servicing, disconnect the dangerous and may void the warranty.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS Safety Never cover the appliance with a cloth. A fire may result. The appliance is hot during use and remains so for some time after being Be aware of loose fitting or hanging switched off. Be careful not to touch the garments when operating the appliance if it may still be hot.
-
Page 7: Guide To The Tepan Yaki
Guide to the Tepan Yaki a Rear cooking zone Display b Front cooking zone c Cooking zone indicators d Display g On/Off indicator e Control knob, rear cooking zone h Temperature control light f Control knob, front cooking zone i "Residual Heat" indicator Standard accessories 2 stainless steel spatulas... -
Page 8: Before Using For The First Time
Before using for the first time Clean the appliance Heat the appliance ^ Before using for the first time, clean Metal components of the appliance the appliance with a damp cloth and have a protective coating which may dry with a soft cloth. give off a slight odor the first time the appliance is heated. -
Page 9: Use
Turning On/Off The Tepan Yaki is divided into two heating areas, which can be used and Do not leave the appliance adjusted separately. For large unattended while in use. quantities, you can use the entire surface for cooking. For smaller To turn the Tepan Yaki on, turn the quantities, you can, for example, cook knob to the clockwise. -
Page 10: Settings
Settings Cooking Setting Range Keep cooked foods warm 1 - 2 Sauté fruit, e. g. diced apples, halved peaches, 2 - 4 sliced bananas, etc. Sauté vegetables, e. g. sliced mushrooms, onions, 5 - 7 peppers, etc. Gently fry fish 7 - 9 Quickly fry meat, firm fish, eggs, pancakes, 9 - 11... -
Page 11: Grilling Tips
Grilling tips Before each use, wipe the griddle with a damp cloth, to remove dust or other residue. – It is best to pre-heat the appliance for 8-10 minutes, at the preferred cooking temperature. For power settings 9 to 12, pre-heat at level 12. –... -
Page 12: Cleaning And Care
– Do not use any sharp or pointed objects which could damage the seal a few drops of stainless steel cleaner between the frame and the (available from Miele) using a damp countertop. cloth. ^ Wipe off the cleaner with water and –... -
Page 13: Frequently Asked Questions
The manufacturer cannot be held responsible for unauthorized work. What if the appliance does not heat up after it is turned on? Possible fault Solution The circuit breaker has tripped. Check whether a fuse is blown. If the problem persists contact Miele. -
Page 14: Technical Service
Technical Service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. -
Page 15: Installation Instructions
Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and machine damage read these instructions before installation or use. -
Page 16: Safety Instructions For Installation
The minimum distances given in installation in these applications. Please these Installation Instructions must contact the Miele Technical Service be observed in order to ensure safe Department with specific requirements. operation. Failure to do so increases The electrical connection should be the risk of fire. - Page 17 SAFETY INSTRUCTIONS FOR INSTALLATION Safety distances above the If there is more than one appliance appliance beneath a hood (e.g. wok burner and electric cooktop), and they have different minimum safety distances always observe the greater distance. The minimum safety distance given by the hood manufacturer must be maintained between the cooktop and the hood above it.
- Page 18 2" (50mm) 2" (50 mm) for CS 1112 CS 1122 CS 1212 CS 1221 CS 1223 CS 1326 CS 1411 not recommended 6" (150 mm) CS 1312 CS 1322 CS 1421 10" (250 mm) for CS 1011...
-
Page 19: Installation
Installation Safety distance when installing the appliance near a wall with trim or a back splash A minimum distance of 2" (50 mm) between the trim or back splash and the countertop cut-out if required. This distance is only necessary if these items are made of combustible materials e.g. - Page 20 Installation Installation dimensions a Spring clips b Appliance front c Installation height d Power supply box with connection cable, L = 78 " (2000 mm)
-
Page 21: Cut Out
Installation Cut out If during installation the seal around ^ Make the worktop cut-out for one or the frame does not sit flush with the more appliances as applicable. countertop in the corners, the corner Remember to maintain a minimum radius, maximum "... -
Page 22: Installation Of Multiple Appliances
Installation Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out Countertop cut-out two appliances three appliances 6 " 6 " For the installation of three appliances For the installation of two appliances the width of the countertop cut-out D is the width of the countertop cut-out D is... - Page 23 Installation Sample calculations for a countertop cut-out for three appliances appliance width appliance width appliance width Countertop minus " (8 mm) minus " (8 mm) cut-out 11" " 11" " (280 mm) (280 mm) (848 mm) (288 mm) 11" 15" "...
- Page 24 Installation " 3 / 1 6 1 " - 1 0 m m ( 2 5 - 3 2 " 2 " ( 5 0 m ( 5 0 m 2 " 2 " " 3 / 1 6 ( 5 0 m ( 5 0 m 6 "...
-
Page 25: Attach The Spring Clips And Support Bars
Installation Attach the spring clips and support bars Wood or solid surface countertops Granite countertop " 3 / 1 6 " 3 / 1 6 1 " - 1 1 " - 1 0 m m 0 m m ( 2 5 - 3 ( 2 5 - 3 ^ Place the supplied spring clips a ^ Position and attach the spring clips... - Page 26 Installation ^ Coat the edges of the spring clips a, ^ and the space d between the strips b and the countertop with silicone (supplied).
-
Page 27: Installing The Appliance
Installation Installing the appliance ^ Feed the power cord down through the cut-out. ^ Then place the front side of the appliance in the countertop cut-out. ^ Then with a hand on each side of the appliance press down evenly on the edges until it clicks into position. -
Page 28: Sealing
Installation Sealing Tiled surfaces The grouting a and shaded area under The appliance must not be permanently sealed into the countertop when the appliance frame must be flat and installed. The sealing strip under the even, so that the frame will lie evenly and the sealing strip under the edge of edge of the appliance provides a sufficient seal for the countertop. -
Page 29: Electrical Connection
Electrical connection Power supply CAUTION: Before installation or ^ Be sure your electrical supply servicing, disconnect the power matches the data plate. supply by either removing the fuse, shutting off the main power supply The combiset is equipped with a or manually "tripping"... -
Page 30: Help Protect Our Environment
Help protect our environment Disposal of packing materials Disposal of an old appliance The cardboard box and packing Old appliances contain materials that materials are biodegradable and can be recycled. Please contact your recyclable. Please recycle. local recycling authority about the possibility of recycling these materials. - Page 32 Alteration rights reserved / 4608 M.-Nr. 07 374 430 / 00 M.-Nr. 07 374 430 / 00 For the most updated manual see the Miele web site.