Installing A Non-Redundant Cabled Ac Power Supply Unit - Dell EMC PowerEdge R440 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge R440:
- Installation and service manual (122 pages) ,
- Installation and service manual (120 pages)
Table of Contents
Advertisement
Figure 87. Removing non-redundant cabled AC PSU
Next step
1
Installing a non-redundant cabled AC power supply.
Installing a non-redundant cabled AC power supply unit
Prerequisite
1
Follow the safety guidelines listed in
Steps
1
Unpack the new power supply unit (PSU).
2
Slide the new PSU into the PSU cage until the PSU is fully seated.
3
Using Phillips #2 screwdriver, tighten the screw to secure the PSU to the system.
Figure 88. Installing a non-redundant cabled AC PSU
Next steps
1
Connect all the cable connectors to the system board.
2
If applicable, install the expansion card riser.
3
Install the air shroud.
4
Follow the procedure listed in
Safety
instructions.
After working inside your
system.
Installing and removing system components
97
Hide quick links:
Advertisement
Table of Contents
