•
Phillips # 1 screwdriver
•
Small plastic scribe
Micro Secure Digital (SD) Card
Removing the Micro Secure Digital (SD) Card
1
Follow the procedure in
2
Press in on the Micro SD card to release it from the computer.
3
Slide the Micro SD card out of the computer.
Installing the Micro Secure Digital (SD) Card
1
Slide the Micro SD into the slot until it clicks into place.
2
Follow the procedures in
Subscriber Identity Module (SIM) Card
Removing the micro SIM card or the micro SIM card tray
CAUTION:
Removing the micro SIM card when the computer is on may cause data loss or damage the card. Ensure that your
computer is turned off or the network connections are disabled.
NOTE:
Micro SIM card tray is available only for systems that are shipped with WWAN card.
1
Insert a paperclip or a micro SIM card removal tool into the pinhole on the micro SIM card tray.
2
Use a scribe to pull the micro SIM card tray.
3
If a micro SIM card is available, remove the micro SIM card from the micro SIM card tray.
Base cover
Removing the base cover
1
Follow the procedure in
2
Loosen the M2.5 x 5.0 captive screws that secure the base cover to the computer.
10
Removing and installing components
Before working inside your
After working inside your
computer.
Before working inside your
computer.
computer.