Nokia N80 User Manual page 95
Hide thumbs
Also See for N80:
- User manual (377 pages) ,
- Manual (128 pages) ,
- Aplicaciones adicionales manual (33 pages)
Table of Contents
Advertisement
Call
waiting—If you have activated call waiting (network
service), the network notifies you of a new incoming call
while you have a call in progress. Set the function on
(Activate) or off (Cancel), or check whether the function
is activated
(Check
status).
Reject call with
SMS—Select
to a caller informing why you could not answer the call.
See 'Answer or decline a call', p. 64.
Message
text—Write a text to be sent in a text message
FCC Draft
when you decline a call.
Image in video
call—If video is not sent during a video call,
you can select a still image to be displayed instead.
Automatic
redial—Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press
.
Summary after
call—Activate this setting if you want the
device to briefly display the approximate duration of the
last call.
1-touch
dialing—Select On, and the numbers assigned to
the 1-touch dialing keys (
pressing and holding the key. See also '1-touch dial a
phone number', p. 60.
Yes
to send a text message
-
) can be dialed by
Anykey
answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
,
,
, and
.
Line in
use—This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select
Line 2
and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
Line
change—To prevent line selection (network service),
select
Disable
if supported by your SIM card. To change
this setting, you need the PIN2 code.
Connection
Data connections and access points
Your device supports packet data connections (network
service), such as GPRS in the GSM network. When you use
your device in GSM and UMTS networks, multiple data
connections can be active at the same time, and access
95
Advertisement
Table of Contents
