Page 1
Nokia 3250 User Guide 9244344 Issue 1 DRAFT...
Page 2
DECLARATION OF CONFORMITY We, NOKIA CORPORATION declare under our sole responsibility that the product RM-38 is in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/. 0434 The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life.
Page 3
Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused. The contents of this document are provided ‘as is’. Except as required by applicable law, no...
Mailbox..........38 Configuration settings service ..10 Outbox ........... 40 Download content and applications 11 View messages on the SIM card..40 Nokia support and contact Cell broadcast ........41 information........... 11 Service command editor ....41 Messaging settings......41 1.
Page 5
Notes............78 16. Battery information..123 Calculator ..........78 File manager ......... 79 Charging and discharging....123 Memory card......... 80 Nokia battery authentication guidelines..........124 13. Tutorial......82 Care and maintenance ..126 14. Tools ......... 83 Additional safety Voice commands........83 Voice mailbox ........
F o r y o u r s a f e t y For your safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.
F o r y o u r s a f e t y WATER-RESISTANCE Your phone is not water-resistant. Keep it dry. BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information stored in your phone. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions.
Page 8
BP-6M batteries. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty and may be dangerous. For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
G e n e r a l i n f o r m a t i o n General information ■ Overview of functions Your phone provides many functions that are practical for daily use, such as a calendar, e-mail application, clock, alarm clock, XHTML Web browser, and radio.
G e n e r a l i n f o r m a t i o n p. 93. The PIN code is usually supplied with the SIM card. Set the phone to request the PIN code each time the phone is switched on. •...
Nokia product. On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokia.com/customerservice.
G e t s t a r t e d 1. Get started ■ Insert a SIM card and battery Always switch the device off, and disconnect the charger before removing the battery. Keep all SIM cards out of the reach of small children. For availability and information on using SIM card services, contact your SIM card vendor.
Page 13
G e t s t a r t e d 3. To release the SIM card holder, slide it backwards (4), and lift it (5). 4. Insert the SIM card into the SIM card holder (6). Ensure that the beveled corner faces upwards. 5.
G e t s t a r t e d ■ Insert a microSD card 1. Turn the lower part of the phone to access the microSD card slot cover. 2. To open the card slot cover, pull the corner of the cover.
G e t s t a r t e d ■ Charge the battery 1. Connect the charger to the wall socket. 2. Connect the lead from the charger to the charger connector in the phone. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.
G e t s t a r t e d ■ Normal operating position Use the phone only in its normal operating position. Your device has an internal antenna. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on.
Y o u r p h o n e 2. Your phone ■ Keys and parts • Power key (1) • Earpiece (2) • Joystick (3) • Selection keys (4) • Menu key • Clear key (6) • Edit key •...
Y o u r p h o n e ■ Mechanical modes Your phone has three mechanical modes: communication, camera, and music mode. To switch between the modes, turn the lower part of the phone. There is a short pause before a mode is activated. In the communication mode, do not try to rotate the lower part of the phone more than 90 degrees to the right or 180 degrees to the left.
Y o u r p h o n e Music mode To activate the music mode while in the communication mode, turn the lower part of the phone 180 degrees to the left so that the keys used to control music playback are on the same side as the display.
Y o u r p h o n e Standby mode joystick shortcuts By default, the phone is in the active standby mode, and the joystick shortcuts available in standby mode cannot be used. You have to disable active standby to use the following shortcuts. To open Contacts, scroll up or down, or press the joystick.
Y o u r p h o n e another number. If you have two phone lines, the divert indicator is for the first line and for the second. A headset is connected to the phone. A loopset is connected to the phone. The connection to a Bluetooth headset has been lost.
Y o u r p h o n e To change the menu view, select Menu > Options > Change view > Grid or List. If you change the order of the functions in the menu, the order may differ from the default order described in this user guide. To close an application or a folder, select Back Exit...
Y o u r p h o n e Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. ■ Keypad lock (keyguard) To prevent the keys from being accidentally pressed, press the left selection key and * within 1.5 seconds to lock the keypad.
C a l l f u n c t i o n s 3. Call functions ■ Make a call 1. In the standby mode, enter the phone number, including the area code. Press the clear key to remove a number. For international calls, press * twice for the international prefix (the + character replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and...
C a l l f u n c t i o n s Enhanced voice dialing You can make a phone call by saying the name that is saved in the contact list of the phone. A voice command is added automatically to all entries in the contact list of the phone.
C a l l f u n c t i o n s conference calls between a maximum of six participants, including yourself. • To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant and Private. The conference call is put on hold on your phone.
C a l l f u n c t i o n s Options during a call Many of the options that you can use during a call are network services. For availability, contact your network operator or service provider. Select Options during a call for some of the following options:...
C a l l f u n c t i o n s Missed calls and received calls To view a list of the last 20 phone numbers from which somebody has tried to call you (network service), select Menu >...
C a l l f u n c t i o n s General log In the general log, for each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event.
W r i t e t e x t 4. Write text You can enter text, for example, when writing messages, using traditional or predictive text input. When you write text, appears on the top right of the display, indicating predictive text input, appears, indicating traditional text input.
W r i t e t e x t ■ Predictive text input You can enter any letter with a single keypress using predictive text input. To activate predictive text input, press the edit key, and select Predictive text on. This activates predictive text input for all editors in the phone.
W r i t e t e x t Write compound words Write the first half of a compound word, and scroll forward to confirm it. Write the last part of the compound word, and to complete the compound word, press 0 to add a space. ■...
M e s s a g i n g 5. Messaging You can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, presentations, and documents. You can also receive messages and data using Bluetooth wireless technology, receive and forward picture messages, receive service messages and cell broadcast messages, and send service commands.
M e s s a g i n g ■ Write and send messages The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS. Your device supports the sending of text messages beyond the character limit for a single message.
M e s s a g i n g a text template for the multimedia message, select Options > Insert object > Template. To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip.
M e s s a g i n g Follow the instructions given by your remote mailbox and Internet service provider. ■ Inbox—receive messages Select Menu > Messag. > Inbox. When there are unread messages in the Inbox, the icon changes to In the Inbox you may see some of the following icons: indicates an unread text message indicates an unread special message, such as a business card...
M e s s a g i n g Business card — To save the contact information, select Options > Save business card. Ringing tone — To save the ringing tone to the gallery, select Options > Save. Calendar entry —...
M e s s a g i n g ■ Mailbox Select Menu > Messag. > Mailbox. When you open this folder, you can connect to your remote mailbox (network service) to do the following: • Retrieve new e-mail headings or messages. •...
Page 39
M e s s a g i n g To cancel retrieving, select Cancel. 3. After you have retrieved the e-mail messages, you can continue viewing them online. Select Options > Disconnect to close the connection and to view the e-mail messages offline. 4.
M e s s a g i n g Undelete To cancel deletion of an e-mail from both the phone and server, scroll to an e-mail that has been marked to be deleted during the next connection, and select Options >...
M e s s a g i n g ■ Cell broadcast You may be able to receive messages on various topics, such as weather or traffic conditions from your service provider (network service). For available topics and relevant topic numbers, contact your service provider.
M e s s a g i n g Message validity — If the recipient of a message cannot be reached within the validity period, the message is removed from the message service center. Note that the network must support this feature. Maximum time —...
Page 43
M e s s a g i n g retrieve messages manually, select Manual. To not receive any multimedia messages or advertisements, select Off. Allow anon. msgs. — To reject messages coming from an anonymous sender, select No. Receive adverts —...
Page 44
M e s s a g i n g Incoming mail serv.: — the IP address or host name of your service provider’s incoming e-mail server Access point in use — the Internet access point (IAP) used for the mailbox. See “Connection,” p. 88. Mailbox name —...
Page 45
M e s s a g i n g Include signature — Select to attach a signature to your e-mail messages and to create or edit a signature text. New e-mail alerts — To not receive alerts about new e-mail, select Off. Retrieval settings Select Retrieval settings...
M e s s a g i n g Service messages — Select whether you want to allow the reception of service messages. Download messages — Select whether to download messages automatically or manually. Cell broadcast settings Check with your service provider whether cell broadcast (network service) is available and what the available topics and related topic numbers are.
C o n t a c t s 6. Contacts You can save and manage contact information, such as names, phone numbers, and addresses. You can also add a personal ringing tone, voice tag, or a thumbnail image to a contact card. You can create contact groups, which allow you to send text messages or e-mail to many recipients at the same time.
C o n t a c t s tone (if the caller’s telephone number is sent with the call and your phone recognizes it). 1. Select Menu > Contacts. 2. To add a ringing tone to a contact, select the contact, Options >...
G a l l e r y 7. Gallery Select Menu > Gallery. Gallery to store and organize your images, video clips, music tracks, sound clips, playlists, streaming links, .ram files, and presentations. Open the gallery to see a list of the folders in the memory. Scroll to a folder (such as Images), and press the joystick to open it.
G a l l e r y To create track lists, mark the music tracks, and select Options > track list. To create image folders and move images to them, select Images, scroll to an image, select Options > Organise >...
M u s i c 8. Music ■ Music player To activate music mode and start Music player, turn the lower part of the phone so that the playback control keys are on the same side as the display. Or, select Menu >...
M u s i c ■ Visual Radio You can use the Visual Radio application as a FM radio with automatic tuning and preset stations, or with parallel visual information related to the radio program if you tune in to stations that offer Visual Radio service.
M u s i c The phone displays the following: • Station location number and the name of the radio station. • Frequency of the last used radio station. • Graphic buttons: to scroll to the next or previous saved station. The buttons are inactive if there are no saved stations.
M u s i c Manual tuning — Set the station frequency manually. To tune, scroll up or down. If you know the frequency of the radio station you want to listen to, enter it, and select OK. Activate loudspeaker —...
M u s i c Exit — Turn off the radio. Station setup Scroll to a station in the station list, press the joystick, and select Edit change the following station parameters: Name — to edit the name of the station Location —...
M u s i c To set light settings and the power saver time-out, select Options > Display settings. Visual Radio settings When the radio is on, select Options > Settings and the following: Start-up tone — to enable or disable the start-up tone Auto-start service —...
Page 57
M u s i c Access the station directory from Options To access the station directory (network service) from the station list, select Options > Station directory. After the connection to the station directory, you are requested to select the nearest location to your current position from a list of folders. Scroll to the nearest location, and press the joystick.
M e d i a 9. Media ■ Camera To use the camera, turn the lower part of the phone to activate the camera mode. See “Camera mode,” p. 18. Or, select Menu > Media > Camera. To zoom in or out, press .
M e d i a Default image name — Change how the captured images are named. Memory in use — Select whether you want to save your images in the phone memory or on the memory card. Select Video and from the following settings: Length —...
M e d i a Many service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point. Contact your service provider for more information. In RealPlayer, you can only open an rtsp:// URL address.
M e d i a Recorded files are stored in Gallery. See “Gallery,” p. 49. Select Menu > Media > Recorder. Select Options > Record sound clip, or select . To pause recording, select . To stop recording, select To rewind or fast forward, select .
M e d i a Quality — to select the playback quality. If the playback appears uneven and slow, change the Quality setting to Normal or Low. Full screen — to play the file using the entire display. To return to the normal screen, select Normal screen.
Page 63
M e d i a Insert > Text — inserts a title, subtitle, or credits Insert > Sound clip — inserts the selected sound clip. The name and length of the selected sound clip is shown in the main view. Insert >...
Page 64
M e d i a Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using a Bluetooth connection. See “Send data using Bluetooth technology,” p. 103. You can also transfer your videos using a Bluetooth connection into your Bluetooth-enabled personal computer, or by using a memory card reader (internal/ external).
W e b ( m o b i l e b r o w s e r ) 10. Web (mobile browser) Select Menu > Services or press and hold 0 in standby mode. Various service providers maintain pages specifically designed for mobile phones.
Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not guarantee or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.
W e b ( m o b i l e b r o w s e r ) Any bookmark showing the title or Internet address of the bookmark. Add bookmarks manually 1. In the bookmarks view, select Options > Bookmark manager >...
W e b ( m o b i l e b r o w s e r ) ■ Browse Web pages On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.
W e b ( m o b i l e b r o w s e r ) To save a page while browsing, select Options > Advanced options > Save page. Saved pages are indicated by In the saved pages view you can create folders for your saved browser pages.
W e b ( m o b i l e b r o w s e r ) stored in the cache memory of the phone. To empty the cache, select Menu > Services > Options > Advanced options > Clear cache.
Page 71
W e b ( m o b i l e b r o w s e r ) Conf. DTMF sending > Always/First time only — Choose whether you want to confirm before the phone sends DTMF tones during a voice call. See “Options during a call,”...
M y o w n 11. My own ■ Themes To change the look of your phone’s display, activate a theme. A theme can include the standby mode wallpaper and power saver. You can edit a theme to personalize your phone further. Select Menu >...
M y o w n ■ Sound meter The sound meter lets you measure the noise level of the environment. The sound meter provides general measurements for personal use that may vary from scientific measurements. Select Menu > My own >...
O r g a n i z e r 12. Organizer ■ Clock Select Menu > Organiser > Clock. Clock settings To change the time or date, select Options > Settings. For more information about the settings, see “Date and time,” p. 92. Set an alarm 1.
O r g a n i z e r ■ Calendar Select Menu > Organiser > Calendar. In the calendar, you can keep track of your appointments, meetings, birthdays, anniversaries, and other events. You can also set a calendar alarm to remind you of upcoming events. Create calendar entries 1.
O r g a n i z e r When editing or deleting a repeated entry, choose how you want the changes to take effect: All occurrences — All repeated entries are changed. This entry only — Only the current entry is changed. Calendar views Press # in the month, week, or day views to automatically highlight today’s date.
O r g a n i z e r Handle to-do notes To open a to-do note, scroll to it, and press the joystick. To delete a to-do note, scroll to it, and select Options > Delete or press the clear key. To mark a to-do note as completed, scroll to it, and select Options >...
O r g a n i z e r The conversion order changes if you write a value in the second Amount field. The result is shown in the first Amount field. Set a base currency and exchange rates Before you can convert currency, you need to choose a base currency (usually your domestic currency) and add exchange rates.
O r g a n i z e r 2. Scroll to an arithmetic function, and press the joystick to select it. 3. Enter the second number. 4. To execute the calculation, scroll to and press the joystick. Note: This calculator has limited accuracy and is designed for simple calculations.
O r g a n i z e r In the memory views, you can view the memory consumption of the different data groups: Calendar, Contacts, Documents, Images, Sound files, Video clips, Messages, Applications, Mem. in use, and Free memory. If the phone memory is getting low, remove some files, or move them to the memory card.
O r g a n i z e r Back up and restore information To back up information from phone memory to the memory card, select Options > Backup phone mem. To restore information from the memory card to the phone memory, select Options >...
T u t o r i a l 13. Tutorial Tutorial contains an introduction to the phone features and a tutorial to teach how to use the phone. The tutorial starts automatically when you start your phone for the first time. To start the tutorial yourself, select Menu >...
T o o l s 14. Tools ■ Voice commands You can call contacts and carry out phone functions by saying voice commands. To select the phone functions to activate with a voice command, select Menu > Tools > Voice comm..
T o o l s ■ Speed dial To assign phone numbers to the speed dialing keys, select Menu > Tools > Spd. dial, scroll to the speed dialing key, and select Options > Assign. Select the contact and the number for the speed dial. To view the number assigned to a speed-dialing key, scroll to the speed dialing key, and select Options...
T o o l s Vibrating alert — Set the phone to vibrate to alert for incoming calls and messages. Keypad tones — Set the volume level for keypad tones. Warning tones — Activate or deactivate warning tones. The phone sounds a warning tone, for example, when the battery is running low.
Page 86
T o o l s on your SIM card. After you have changed the display text language, the phone restarts. Changing the settings for Phone language Writing language affects every application in your phone, and the change remains effective until you change these settings again.
Page 87
T o o l s different directions or pressing the joystick in the standby mode. The joystick shortcuts are not available if Active standby is On. Operator logo — this setting is visible only if you have received and saved an operator logo. You can select whether the operator logo is shown.
T o o l s Automatic redial — to set the phone to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt. Press the end key to stop automatic redialing. Summary after call — to set the phone to briefly display the approximate duration of the last call Speed dialling >...
Page 89
T o o l s Receive access point settings You may receive access point settings in a message from your service provider, or you may have preset access point settings in your phone. Access points To create a new access point or edit an existing access point, select Menu >...
Page 90
T o o l s Authentication — Normal Secure Homepage — Depending on whether you are setting up an Internet access point or MMS access point, enter the Web address or the address of the multimedia messaging center. Data call type (for data call only) —...
Page 91
T o o l s The phone expects the callback call to use the same data call settings that were used in the callback-requesting call. The network must support that type of call in both directions, to and from the phone. Callback type —...
Page 92
T o o l s Data call Data call settings affect all access points that use a GSM data call. Select Menu > Tools > Settings > Connection > Data call and from the following options: Online time — to set the data call to disconnect automatically after a time-out if there is no activity.
Page 93
T o o l s Clock type — to select whether the analog or digital clock is shown in the standby or active standby mode. See “Clock,” p. 74. Clock alarm tone — to select the alarm clock tone Network operator time (network service) —...
T o o l s agreed on with the network operator, select Default. If you want to use another group (you need to know the group index number), select On. When security features that restrict calls are in use (such as call barring, closed user group, and fixed dialing) calls may be possible to the official emergency number programmed into your device.
T o o l s View certificate details and check authenticity You can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked. The phone notifies you if the identity of the server is not authentic or if you do not have the correct security certificate in your phone.
T o o l s 3. Select the desired option. For example, to divert voice calls when your number is busy or when you reject an incoming call, select busy. 4. To set the divert option on or off, select Options >...
T o o l s • Applications that have been saved but not installed, indicated with • Applications installed in the phone memory • Applications installed on the memory card, indicated with Install an application Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.
T o o l s warning. Continue installation only if you are sure of the origins and contents of the application. To view extra information about the application, scroll to it, and select Options > Go to web address. To see what software packages have been installed or removed and when, select Options >...
T o o l s Select Menu > Tools > Actv. keys to view the digital rights activation keys stored in your phone. To view valid keys ( ) that are connected to one or more media files, select Valid keys.
T o o l s Session mode — Select whether to use an Internet access point or Bluetooth for the server connection. Access point — Select the access point to be used when connecting to the server. Host address — Enter the URL address of the server. Port —...
Exchange Profile, Service Discovery Profile, and SIM Access Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations.
C o n n e c t i v i t y subject to interference from obstructions such as walls or from other electronic devices. Using Bluetooth technology consumes the battery and the operating time of the phone is reduced. Take this into account when performing other operations with your phone.
Page 104
C o n n e c t i v i t y display one by one. You can see a device icon, the device name, the device type, or a short name. Paired devices are shown with To interrupt the search, select Stop. The device list freezes and you can start to form a connection to one of the devices already found.
C o n n e c t i v i t y Paired devices view Paired devices are indicated by in the search result list. In the Bluetooth main view, scroll right to open a list of paired devices. Do not accept Bluetooth connections from sources you do not trust. To pair with a device, select Options >...
C o n n e c t i v i t y ■ Instant messaging Instant messaging (network service) allows you to converse with other people using instant messages, and join discussion forums (IM groups) with specific topics. Once you have registered with a instant messaging (IM) service, you can log into the service provider’s IM server.
Page 107
C o n n e c t i v i t y Sort IM contacts — Select how contacts are sorted. To sort contacts so that online contacts are shown first, select By online status. Availabil. reloading — Choose how to update information about whether your IM contacts are active: select Automatic or Manual.
Page 108
C o n n e c t i v i t y Group that you are currently joined to but which you have not saved To join an IM group, scroll to the group on the list, and press the joystick. To join an IM group not on the list but whose group ID you know, select Options >...
C o n n e c t i v i t y To send a private message to a member (if allowed in the group), select Options > Send private msg., select the recipient, write the message, and press the joystick. To reply to a private message sent to you, scroll to the message, and select Options...
Page 110
C o n n e c t i v i t y To prevent receiving messages from certain users, select Options > Blocking options and from the following: Add to blocked list — to block messages from the currently selected user Add ID to list manually —...
C o n n e c t i v i t y Create a new IM group Select Menu > Connect. > > IM groups > Options > Create new group. Enter the settings for the group: Group name, Group topic, and a Welcome note that the participants see...
C o n n e c t i v i t y ■ Connection manager Select Menu > Connect. > Conn. mgr.. In the connection manager, you can identify the status of multiple data connections, view details on the amount of data sent and received, and end unused connections.
C o n n e c t i v i t y Shared (not displayed if the connection is not shared) — number of applications using the same connection End connections To end a connection, scroll to the connection, and select Options >...
C o n n e c t i v i t y While connected to the push to talk service, you can use the other functions of the phone. Many of the services available for traditional voice calls (for example, voice mailbox) are not available for push to talk communications.
C o n n e c t i v i t y Default nickname — Enter your nickname shown to other users. Your service provider may have disabled the editing of this option in your phone. Show my PTT address —...
C o n n e c t i v i t y service. If you want to keep the application active in the background, select No. Make a one-to-one call Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.
C o n n e c t i v i t y Subscribe to the login status of others To subscribe to or unsubscribe from the push to talk online status of others, select Options > contacts, scroll to the contact, and select Options >...
Page 118
C o n n e c t i v i t y Each member in the channel is identified by a user name given by the service provider. Channel members can choose a nickname for within each channel, which is shown as a caller identification. Channels are registered with a URL address.
Page 119
C o n n e c t i v i t y Respond to a channel invitation To save a received channel invitation, select Options > Save PTT channel. The channel is added to your PTT contacts, channels view. After you save the channel invitation, you are asked if you want to connect to the channel.
C o n n e c t i v i t y For group calls additional options are available: Active members — to view a list of active group members Send invitation — to start the invitation view (only available for own dial-in calls) ■...
C o n n e c t i v i t y The available applications that you can synchronize may vary. Contact your service provider for more information. 3. Define the Connection settings Server version — Select the server protocol version. Server ID —...
(not synchronized) in the phone or on the server. ■ USB You can use the USB data cable to transfer data between the phone and a compatible PC. You can also use the USB data cable with Nokia PC Suite. Select Menu >...
The battery can be charged and discharged hundreds of times, but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.
B a t t e r y i n f o r m a t i o n ■ Nokia battery authentication guidelines Always use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for...
Page 125
What if your battery is not authentic? If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements.
C a r e a n d m a i n t e n a n c e Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
A d d i t i o n a l s a f e t y i n f o r m a t i o n Additional safety information Your device and its enhancements may contain small parts. Keep them out of the reach of small children.
A d d i t i o n a l s a f e t y i n f o r m a t i o n depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
Page 130
SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada.
Page 132
settings 35 call duration 28 e-mail messages connection timer 29 deleting 39 dialed numbers 28 retrieving 38 general 29 emergency calls 7 missed calls 28 enhancements packet data counter 29 general 8 received calls 28 settings 97 recent calls 27 settings 29 file manager 79 Flash Player 61...
Page 133
listening to music 51 security 93 standby mode 86 time 92 writing language 86 network shortcuts 20 cell info 96 sound meter 73 selecting 96 speed dial network services 7 assigning a phone number 48 notes 78 calling 24 changing a phone number 84 deleting a phone number 84 standby mode one-touch dial.
Page 134
Nokia support 11 saving a page 69 settings 65 browser settings 70 viewing a saved page 68 browsing 68 viewing bookmarks 66 connecting 66 writing text. See text input connection security 67 disconnecting 69...