free stats

Advertisement

Operating and installation instructions
Gas wok burner
To prevent the risk of accidents or damage to the appliance, it is
essential to read these instructions before it is installed and used for
the first time.
en-AU, NZ
M.-Nr. 09 317 370

Advertisement

Table of Contents
loading

Summary of Contents for Miele CS 1018 G

  • Page 1 Operating and installation instructions Gas wok burner To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr. 09 317 370...
  • Page 2 For trouble-free operation of the appliance, it is best to use it in the countries specified for use. For use in other countries, please contact Miele in your country.
  • Page 3: Table Of Contents

    Contents Warning and Safety instructions................ 5 Caring for the environment ................ 16 Overview.......................  17 Wok burner ......................17 Burner........................19 Accessories supplied .................... 20 Using for the first time .................. 21 Cleaning the CombiSet for the first time ............... 21 Switching on the CombiSet for the first time ............
  • Page 4 Contents Installation...................... 44 Electrical connection .................. 48 Gas connection.................... 49 Setting the gas pressure ..................51 Burner ratings ......................  52 Conversion to another type of gas .............. 53 Jet table......................... 53 Changing the jets ....................53 Checking the first intake of air................ 56 Changing the small jets ..................
  • Page 5: Warning And Safety Instructions

    They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for non-compliance with these instructions. Keep these instructions in a safe place and ensure that new users...
  • Page 6 The wok burner is not suitable for outdoor use.  It is intended only to cook food and keep it warm. Any other use is not supported by Miele and could be dangerous.  This appliance is not intended for use by persons (including...
  • Page 7 Warning and Safety instructions Safety with children  Young children must not be allowed to use this appliance.  Older children may only use the appliance when its operation has been clearly explained to them and they are able to use it safely, recognising the dangers of misuse.
  • Page 8  Repairs and other work by unqualified persons could be dangerous. Installation, maintenance work and repairs to electrical appliances must only be carried out by a Miele approved service technician.  A damaged appliance is dangerous. Check it for any visible damage.
  • Page 9 The manufacturer's warranty will be invalidated if the appliance is not repaired by a Miele approved service technician.  Faulty components must only be replaced by genuine Miele spare parts. The manufacturer can only guarantee the safety of the appliance when Miele replacement parts are used.
  • Page 10 Warning and Safety instructions  If the appliance is installed behind a furniture door, do not close the door while the appliance is in operation. Heat and moisture would build up behind a closed furniture door, potentially causing damage to the appliance, the furniture unit and the flooring. Wait until the appliance has cooled down completely before closing the furniture door.
  • Page 11 Warning and Safety instructions Correct use  The appliance gets hot when in use and remains hot for some time after being switched off. Do not touch the appliance if there is a possibility that it could still be hot. ...
  • Page 12 Warning and Safety instructions  When the appliance is switched on either deliberately or by mistake, or when there is residual heat present, there is the risk of any metal items left on the appliance heating up, with the danger of burning.
  • Page 13 If the pan diameter is too large, flames can spread out to the sides and damage or burn the worktop, wall claddings or surrounding units and also parts of the cooktop. Miele cannot be held liable for this type of damage.
  • Page 14 Warning and Safety instructions  If the appliance has not been used for a long period of time it should be thoroughly cleaned before it is used again. It is also advisable to have the appliance tested by a qualified person for safety.
  • Page 15 Warning and Safety instructions Cleaning and care  Do not use a steam cleaning appliance to clean this wok burner. Pressurised steam could reach the electrical components and cause a short circuit.
  • Page 16: Caring For The Environment

    Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
  • Page 17: Overview

    Overview Wok burner a Wok burner c Operating controls b Pan support...
  • Page 18 Overview Operating controls Symbol Description  Burner off, the gas supply is turned off  Ignition position  Largest flame: Inner and outer burner at highest setting.  (2x) Large flame: Outer burner at lowest setting, inner burner at highest setting. ...
  • Page 19: Burner

    Overview Burner g Inner burner cap h Outer burner cap i Burner ring j Burner head k Ignition safety device l Ignitor m Burner base...
  • Page 20: Accessories Supplied

    Overview Accessories supplied The accessories supplied with your appliance, as well as a range of optional ones, are available to order from Miele (see "Optional accessories"). Wok ring The wok ring supplied gives additional stability to the wok, especially to woks...
  • Page 21: Using For The First Time

    Using for the first time  Please stick the extra data plate for Switching on the CombiSet for the appliance supplied with this the first time documentation in the space provided The metal components have a in the "After sales service, data plate, protective coating which when heated warranty"...
  • Page 22: Pans

    Miele cannot be held liable for this type of damage. – Remember when purchasing new pans that manufacturers usually refer to the diameter at the top of the pan in their documentation.
  • Page 23: Wok Ring

    Pans Wok ring  Use the wok ring supplied to give additional stability to the wok, especially to woks with a rounded base.  Make sure that the wok ring is located securely in its correct position. See illustration. The wok is unique among cookware in that it has a small base diameter and a large rim diameter (usually 35-40 cm).
  • Page 24: Tips On Saving Energy

    Tips on saving energy – Use a pan lid whenever possible to minimise heat loss. – Wide, shallow pans are preferable to tall, narrow ones. They will heat up faster. – Cook with as little water as possible. – Reduce the power setting once the water has come to the boil or the oil is hot enough to fry in.
  • Page 25: Operation

    Operation Switching on during a power outage  Fire hazard! If there is an interruption to the Do not leave the cooktop unattended electricity supply, the gas can be whilst it is being used. ignited manually, e.g. with a match. Switching on ...
  • Page 26: Adjusting The Flame

    Operation Adjusting the flame Switching off  Turn the control clockwise to position As the outer part of the flame is much "". hotter than the centre, the tips of the flames should stay beneath the pan This stops the flow of gas and the flame base.
  • Page 27: Safety Features

    Safety features Thermo-electric ignition This appliance has a thermo-electric ignition safety device. If the flame goes out, for example if food has boiled over or if there is a sudden draught, and automatic re-ignition has been unsuccessful, the supply of gas to the burner will be cut off.
  • Page 28: Cleaning And Care

    Cleaning and care  Allow the CombiSet to cool down Danger of burning! before cleaning. The appliance must be switched off and have cooled down before  The CombiSet and accessories cleaning. should be cleaned after each use.  Dry the CombiSet after using water to ...
  • Page 29: Stainless Steel Frame/Control Panel

     Finally, dry with a clean soft cloth. first.  Dry the control(s) with a clean cloth. Useful tip: The Miele conditioning agent for stainless steel can be used after cleaning to help keep your appliance looking good (see "Optional accessories").
  • Page 30: Pan Supports

    Cleaning and care Pan supports Burner Do not clean the pan supports in a Do not clean any parts of the burner dishwasher. in a dishwasher.  Remove the pan supports.  The burner should be dismantled and then cleaned by hand using a ...
  • Page 31: Reassembling The Burner

    Cleaning and care Reassembling the burner  Place the burner head  onto the burner base  so that the ignition safety device  and the ignitor  extend through their respective holes. The lobe  on the burner cap must fit into the recess  on the burner head.
  • Page 32: Problem Solving Guide

    Problem solving guide With the aid of the following guide, minor problems can be easily corrected without contacting Miele. If, after reading this guide, you can't remedy the problem yourself, please call Miele (see back cover for details). Please note, however, that a call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions.
  • Page 33 The mains circuit breaker has tripped. burner does not spark.  You may need to contact a qualified electrician or Miele. There is food residue stuck between the ignitor and the burner cap. There is food residue on the ignition safety device.
  • Page 34: Optional Accessories

    These products can be ordered from looking good for longer. the Miele online shop. They can also be ordered directly from Miele (see end of this booklet for contact details). Original Miele ceramic and Original Miele all purpose stainless steel cooktop cleaner...
  • Page 35: Safety Instructions For Installation

    Safety instructions for installation Fit the wall units and rangehood before fitting the CombiSet to avoid damaging  The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resistant adhesive which will not dissolve or distort. Any splashbacks must be of heat-resistant material as well.
  • Page 36: Safety Distances

    Safety distances Safety distance above the Clearance underneath the CombiSet appliance A minimum safety clearance of 30 mm must be provided underneath the appliance. Please note that clearance must also be provided for the installation of the flexible gas connection hose and mains electrical cable if the appliance is to be installed above a closed surface (e.g.
  • Page 37 Safety distances Safety distances to the sides and back of the appliance Ideally the appliance should be installed with plenty of space on either side. There may be a wall at the rear and a tall unit or wall on one side (right or left). On the other side, however, no tall unit or wall should stand higher than the appliance.
  • Page 38 Safety distances A gas appliance shall be installed such that the surface temperature of any nearby combustible surface* will not exceed 65 °C above ambient. The minimum clearance from a combustible surface shall be a 200 mm horizontal distance from the periphery of any gas burner (AS 5601).
  • Page 39: Installation Notes

    Installation notes Seal between the CombiSet Tiled worktop and the worktop Grout lines  and the hatched area underneath the CombiSet frame must be smooth and even. If they are not the Do not use sealant between the CombiSet will not sit flush with the CombiSet and the worktop.
  • Page 40: Building-In Dimensions

    Building-in dimensions a Spring clamps b Front c Building-in depth d Building-in depth for the mains connection box with mains connection cable, L = 2000 mm e Building-in depth for the gas connection R 1/2 - ISO 7-1...
  • Page 41 Building-in dimensions Distances from burner to the edge of the appliance...
  • Page 42: Building-In Several Combisets

    Building-in several CombiSets Example: 3 CombiSets a Spring clamps b Spacer bars c Gap between spacer bar and worktop d Cover strips e CombiSet width minus 8 mm f CombiSet width g CombiSet width minus 8 mm h Worktop cut-out...
  • Page 43 Building-in several CombiSets Calculating the worktop cut-out The frames of the CombiSets overlap the worktop at the outside right and left by 8 mm on each side.  Add up the widths of the CombiSets and subtract 16 mm from this figure. Example: 288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm The CombiSets are 288 mm, 380 mm or 576 mm wide depending on model (see...
  • Page 44: Installation

    Installation Preparing the worktop  Make the worktop cut-out as shown in "Building-in dimensions" or as calculated (see "Installation of several appliances"). Observe the safety distances (see "Safety distances"). Wooden worktops  Seal the cut surfaces on wooden worktops with a suitable sealant to avoid swelling caused by moisture.
  • Page 45 Installation Granite and marble worktops You will need heavy duty double-sided tape (not supplied) to secure the spring clamps and spacer bars.  Apply silicone to the side and lower edges of the spring clamps  and the spacer bars .  Then fill the gap  between the spacer bar ...
  • Page 46 Installation Installing several CombiSets Installing the CombiSet  Push the built-in CombiSet to the  Feed the mains connection cable side until the holes in the spacer bar down through the cut-out. can be seen.  Starting at the front, position the CombiSet in the worktop cut-out.
  • Page 47 Installation Connecting the CombiSet Removing the CombiSet  Connect the CombiSet to the  If the CombiSet can be accessed electricity and gas supplies (see "Gas from below, push it out from below. connection"). Push the rear side out first. ...
  • Page 48: Electrical Connection

    Residual current device  Danger of injury! For extra safety, it is advisable to Miele cannot be held liable for protect the appliance with a suitable unauthorised installation, residual current device (RCD) with a trip maintenance and repair work as this range of 30 mA.
  • Page 49: Gas Connection

    Gas connection  The gas connections the gas hose Connection to the gas supply, or and the mains connection cable can conversion from one type of gas to get damaged when they become another should only be undertaken hot. by an approved gas fitter, who is Ensure that the gas hose and responsible for correct functioning of electrical cable are installed in such a...
  • Page 50 If the appropriate jets have not been supplied with the appliance you will need to contact Miele. Conversion to another type of gas is described under the relevant Section. Connection to the appliance The gas connection has a ¹/₂"...
  • Page 51: Setting The Gas Pressure

    Gas connection Setting the gas pressure The gas regulator is only included with appliances which are set up for The gas pressure must be set by the connection to natural gas. approved gas fitter as shown on the data plate: Natural gas 1.0 kPa ULPG (Propane/Butane) 2.75 kPa The gas pressure must be set with the...
  • Page 52: Burner Ratings

    Burner ratings Nominal ratings Gas type Highest setting Lowest setting MJ/h MJ/h Natural gas 16.3 ULPG...
  • Page 53: Conversion To Another Type Of Gas

    Conversion to another type of gas Changing the jets  Conversion from one type of gas to another should only be  Disconnect the cooktop from the undertaken by an approved and electricity supply and turn off the gas registered gas fitter in strict supply.
  • Page 54 Conversion to another type of gas Changing the main jet  Lift the top of the appliance off.  Remove the burner caps , burner ring  and burner head .  Undo the screws .  Unscrew the main jet anti-clockwise  Pull the control knob off. from its housing with an SW 10 spanner while counterholding it with an SW 13 spanner (see picture).
  • Page 55 Conversion to another type of gas To change the jet for the inner burner d Jet (main jet for the inner burner) e Air intake sleeve f Vent  Remove the screw  from the fitting  with an SW 8 spanner while counterholding it with an SW 12 spanner.
  • Page 56: Checking The First Intake Of Air

    Conversion to another type of gas Checking the first intake of air Changing the small jets a Retaining screw b Air intake sleeve a Small diameter jet (e.g. for ULPG gas: 0.23) Gap X must measure: For natural gas: 13 mm b Large diameter jet For ULPG gas: 13 mm (e.g.
  • Page 57: Checking Operation

    Conversion to another type of gas Checking operation  Check all gas fittings for leaks.  Reassemble the cooktop.  Ignite all burners to check that they are operating correctly. – The flame must not go out on the lowest setting, or when the control is turned quickly from the highest to the lowest setting.
  • Page 58: After Sales Service, Data Plate, Warranty

    After sales service, data plate, warranty After sales service In the event of any faults which you cannot easily remedy, please contact Miele. See back of this booklet for contact details. Please quote the model and serial number of your appliance when contacting Miele.
  • Page 59 Miele Experience Centre South Melbourne: Freemans Bay, Auckland 1011 206-210 Coventry Street South Melbourne, VIC 3205 Miele Experience Centre Auckland: Miele Experience Centre and Office Sydney: 8 College Hill 3 Skyline Place Freemans Bay, Auckland 1011 Frenchs Forest, NSW 2086 Telephone:...
  • Page 60 CS 1018 G  en-AU, NZ M.-Nr. 09 317 370 / 03...

Table of Contents