Acquire Black And White Level Data (Maintenance Mode 55); Adjustment Of Software Correction For Inclination/Corrugation/Ruled Lines (Maintenance Mode 65); Update The Paper Feeding Correction Values (Maintenance Mode 58); Margin Adjustment In Borderless Printing (Maintenance Mode 66) - Brother MFC Series Service Manual
Table of Contents
Advertisement
1.8
Acquire Black and White Level Data (Maintenance mode 55)
Refer to
Chapter 5 "1.4.15 Acquisition of White/Black Level Data and CIS Scanner Area
Setting (Maintenance mode 55)"
1.9
Adjustment of Software Correction for Inclination/Corrugation/Ruled
Lines (Maintenance mode 65)
Refer to
Chapter 5 "1.4.20 Adjustment of Vertical Print Lines/Software Correction for
Inclination/Corrugation/Ruled Lines (Maintenance mode 65)"
software correction for inclination/corrugation/ruled lines.
1.10 Update the Paper Feeding Correction Values (Maintenance mode 58)
Refer to
Chapter 5 "1.4.17 Updating of Paper Feeding Correction Value (Maintenance
mode 58)"
for details on the execution.
1.11 Margin Adjustment in Borderless Printing (Maintenance Mode 66)
Refer to
Chapter 5 "1.4.21 Margin Adjustment in Borderless Printing (Maintenance mode
66)"
for details on the execution.
1.12 Reset Purge and Flushing Counts (Maintenance mode 80)
Replace the Ink absorber box and Flushing box and reset the purge and flushing counts by
following the steps below.
(1) Switch the machine to the maintenance mode.
(2) Enter the [8] and [0].
(3) Press the [ ] key several times until the purge (or flushing count) appears on the LCD.
(4) Enter the [2] [7] [8] [3] in this order to reset the purge (or flushing) count.
(5) When the count is reset, the machine automatically returns to the initial stage of the
maintenance mode.
When the purge or flushing count approaches 9,050 or Black: 396,479,328 Color:
201,873,385, respectively, the "MACHINE ERROR 46" appears and further purge or
flushing operations are prohibited. Replace the ink absorber box and flushing box, and then
reset their counts using the procedure above.
1.13 Creating of Head Calibration Data and Writing it into Flash ROM
(Maintenance mode 02)
Refer to
Chapter 5 "1.4.2 Creating of Head Calibration Data and Writing it into Flash ROM
(Maintenance mode 02)"
for details on the execution.
for details on the execution.
4-9
for details on how to adjust
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
