5 - 6 seconds 300mA Input rating 0°C - 45°C (32°F - 113°F) Operating temperature ZenFone 2 series Compatible ZenFones NOTE: • S pecifications are subject to change without notice. All brand names, trademarks or registered trademarks are the property of their respective holders. • Visit www.asus.com/support for full list of compatible models. Safety notices • Using your ZenFlash more than ten (10) times within 1 minute may overheat the device. If your device heats up, allow it to cool down before reusing it with your ZenFone. • When using your ZenFlash, ensure that it is not directed towards your subject’s eyes. • Never attempt to disassemble and reassemble your ZenFlash. • Do not expose your ZenFlash to extremely high temperatures or high humidity environments.
Page 3
Getting to know your ZenFlash Photodiode Ambient light sensor Xenon flash Micro USB cable Installing ZenFlash App on your ZenFone 1. Connect your ZenFone to the Internet then log in or sign up for a Google account. 2. Launch Play Store on your ZenFone, or download from www.asus.com/support. 3. Key in ZenFlash on the search field then tap INSTALL.
Page 4
Using ZenFlash with your ZenFone 1. Take out your ZenFlash from the silicon case. 2. Pull out the USB cable from the bottom of your ZenFlash. 3. Peel off the covering of the adhesive transparent pad on the back of the hoop and loop fastener set. 4. Firmly position your ZenFlash under the rear camera of your ZenFone. 5. Connect the micro USB cable to your ZenFone. 6. Launch the ZenFlash app on your ZenFone and start shooting. NOTE: The transparent adhesive pad (with non-water-soluble glue) can be used repeatedly. If dirty, rinse it and allow to air-dry before reuse. IMPORTANT! • For accurate responses, use your ZenFone without a case or sleeve. • Ensure the photodiode of your ZenFlash and the LED flash of your ZenFone are placed in a straight line. • The distance between the photodiode and your LED flash has to be no more than 4 cm. • Ensure your ZenFlash does not block the LED flash on your ZenFone. • For better result, use your ZenFlash in low-light conditions and keep it at least 1 meter away from your subject.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions. Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. Regional notice for California WARNING! This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Wash hands after handling.