Power Supply; Moving The Scanner; Handling - Canon imageFORMULA DR-G2140 User Manual
Hide thumbs
Also See for imageFORMULA DR-G2140:
- Service manual (196 pages) ,
- Service manual (25 pages) ,
- User manual (161 pages)
Table of Contents
Advertisement
Power Supply
● Connect only to a power outlet of the rated voltage and power
supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending
on your region).
● Do not use the scanner with a power supply that is not rated for the
specified voltage. Doing so might cause a fire or electric shock.
● Do not connect other electrical equipment to the same power outlet
to which the scanner is connected. Also, when using an extension
cord, make sure that the extension cord is rated for the current
requirements of the scanner.
● The power cord may be damaged if frequently stepped on or if
heavy objects are placed on it.
● Do not use the power cord while it is coiled.
● Do not pull directly on the power cord. When disconnecting the
power cord, grasp the plug and remove it from the outlet.
● Keep the area around the power cord clear of objects so that the
power cord can be disconnected easily in an emergency.
● If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.
Moving the Scanner
● The scanner weights about 25.0 kg (55.1 lbs). To lift or move the
scanner, always use two people, one on each side. Never attempt
to lift the scanner by yourself. You could drop the scanner or pinch
your fingers, resulting in personal injury or damage to the scanner.
Remember to be extra careful when moving it.
● Make sure to disconnect the interface cable and power cord when
moving the scanner. If the scanner is carried with these items
connected, the plugs and connectors may be damaged or cause
the scanner to fall and result in personal injury or damage to the
scanner.
Handling
WARNING
Note the following precautions whenever using the scanner. Failure to
do so may result in a fire or electric shock.
● Never use alcohol, benzene, paint thinner, aerosol sprays, or any
other highly flammable substance near the scanner.
● Do not cut, damage, or modify the power cord. Do not place heavy
objects on the power cord, and do not pull or excessively bend the
power cord.
21
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
