Page 1
Operating and installation instructions Gas wok burner To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-HK M.-Nr. 10 829 940...
Page 2
For trouble-free operation of the appliance, it is best to use it in the countries specified for use. For use in other countries, please contact Miele in your country.
Page 3
Gas-heated appliances Safety precautions to take if you smell gas Turn off the gas emergency control valve immediately. This is usually located near the gas meter. Eliminate all sources of ignition in a safe manner. Do not smoke, light cigarette lighters or matches. ...
Contents Warning and Safety instructions................ 6 Caring for the environment ................ 16 Guide to the appliance .................. 17 Wok ........................17 Control knob......................18 Burner........................19 Before using for the first time ................ 20 Cleaning the ProLine element for the first time ............. 20 Switching on the ProLine element for the first time ..........
Page 5
Contents Installation...................... 40 Electrical connection .................. 44 Gas connection.................... 46 Burner ratings ...................... 48 After sales service.................... 49 Contact in case of malfunction ................49 Data plate ......................49 Guarantee......................49 Technical Data ..................... 50...
They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and ensure that new users...
Page 7
Warning and Safety instructions Correct application This wok is designed for domestic use and for use in similar environments. This wok is not intended for outdoor use. This wok is intended for domestic use only to cook food and keep it warm.
Page 8
Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the wok unless they are constantly supervised. Children aged 8 and older may only use the wok without supervision if they have been shown how to use it in a safe manner. Children must be able to understand and recognise the possible dangers caused by incorrect operation.
Page 9
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised registered gas installer. Damage to the wok can compromise your safety. Check the wok for visible signs of damage.
Page 10
Miele authorised service technician. Otherwise the warranty is invalidated. Miele can only guarantee the safety of the appliance when genuine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
Page 11
Warning and Safety instructions If the wok is installed behind a furniture door, do not close the door while the appliance is in operation. Heat and moisture would build up behind a closed furniture door, potentially causing damage to the appliance, the furniture unit and the flooring. Wait until the appliance has cooled down completely before closing the furniture door.
Page 12
Warning and Safety instructions Correct use The wok gets hot when in use and remains hot for some time after being switched off. Do not touch the appliance if there is a possibility that it could still be hot. ...
Page 13
If the pan diameter is too large, flames can spread out to the sides and damage or burn the worktop, wall claddings or surrounding units and also parts of the cooktop. Miele cannot be held liable for this type of damage.
Page 14
Warning and Safety instructions The pan support supplied with the appliance must always be used. Never place a pan on the burner itself. Replace the pan supports carefully to avoid scratching the surface of the hob. Do not use or store flammable materials near this appliance. ...
Page 15
Warning and Safety instructions Cleaning and care Do not use a steam cleaning appliance to clean this wok. The steam could reach electrical components and cause a short circuit.
/ recycling centre for electrical and electronic appliances, or contact your dealer or Miele for advice. You are also responsible (by law, depending on territory) for deleting any personal data that may be stored on the appliance being disposed of.
Guide to the appliance Control knob Symbol Description Burner off, the gas supply is turned off Ignition position Largest flame Smallest flame...
Before using for the first time Please stick the extra data plate for Switching on the ProLine the appliance supplied with this element for the first time documentation in the space provided The metal components have a in the “After sales service” section of protective coating which when heated this booklet.
(maximum rim diameter 40 cm). Make surrounding units and also parts of sure that the base does not touch the the appliance. Miele cannot be held burner. A distance of 1 cm should be liable for this type of damage. maintained between the burner and the –...
Tips on saving energy – Use a pan lid whenever possible to minimize heat loss. – Wide, shallow pans are preferable to tall, narrow ones. They will heat up faster. – Cook with as little water as possible. – Reduce the size of the flame once the water has come to the boil or the oil is hot enough to fry in.
Operation Adjusting the flame Risk of fire with overheated food. Unattended food can overheat and The burners can be regulated at any catch alight. level between the strongest and weakest flame. Do not leave the hob unattended whilst it is being used. As the outer part of the flame is much hotter than the centre, the tips of the Switching on...
Safety features Thermocouple (flame failure monitor) This wok has a thermocouple. If the flame goes out, for example because food has boiled over or if there has been a sudden draught, the supply of gas to the burner will be cut off. This will prevent any gas escaping.
Cleaning and care Allow the ProLine element to cool Danger of burning due to hot down before cleaning. surfaces. The surfaces will be hot after Clean the ProLine element and cooking. accessories after each use. Switch the wok off. ...
Cleaning and care Stainless steel frame/control Damage caused by soiling. panel Soiling, particularly salty food or liquid and olive oil, can cause Clean the frame and the control panel damage if left on the printed surfaces with a solution of warm water and a for a long time.
Cleaning and care Pan supports Burner Remove the pan supports. The burner components are not dishwasher safe. Clean the pan supports in the The burner components should only dishwasher or with a solution of warm be cleaned by hand. water and a little washing-up liquid applied with a soft sponge.
Page 28
Cleaning and care Assembling the burner Fit cover plate over burner base such that the ignitor and the thermocouple fit through their respective holes in the cover. Make sure that the cover sits evenly. Do not use a bent cover plate! ...
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it.
Page 30
The mains fuse has tripped. burner does not spark. You may need to contact a registered electrical worker or Miele. There is food residue stuck between the ignitor and the burner cap. There is food residue on the thermocouple.
These products can be ordered through the Miele Webshop. Removes heavy soiling, limescale deposits and aluminium residues They can also be ordered from Miele (see end of this booklet for contact Microfibre cloth details) or from your Miele dealer. Removes finger marks and light soiling...
Safety instructions for installation Damage from falling objects. Take care not to damage the ProLine element when fitting wall units or a cooker hood above it. Fit the wall units and the cooker hood before the ProLine element. The veneer or laminate coatings of worktops (or adjacent kitchen units) must be treated with 100 °C heat-resistant adhesive which will not dissolve or distort.
Safety distances Safety distance above the Safety Distance below the CombiSet CombiSet There should be at least 30 mm height or plenty of space reserved below the CombiSet for the installation of the flexible gas connection pipe and electrical cable. It also avoids any possible hindrance towards the movement of all moveable kitchen parts (e.g.
Page 34
CS 1012 / CS 1012-1 CS 1013 / CS 1013-1 Not recommended 150 mm CS 1421 CS 1312 CS 1322 200 mm CS 1034 / CS 1034-1 250 mm CS 1011 / CS 1021 CS 1018 / CS 1018 G CS 1028 G Not recommended...
Page 35
Safety distances Safety distance when installing the appliance near a wall with additional niche cladding A minimum safety distance must be maintained between the worktop cut-out and any niche cladding to protect it from heat damage. If the niche cladding is made from a combustible material (e.g. wood) a minimum safety distance ...
Installation notes Sealing between the ProLine Tiled worktop Element and the worktop Grout lines and the hatched area underneath the ProLine element frame must be smooth and even. If they are The ProLine element and worktop not, the ProLine element will not sit may be damaged if the ProLine flush with the worktop and the sealing element needs to be removed after it...
Building-in dimensions a Spring clamps b Front c Building-in depth d Building-in depth including mains connection box with mains connection cable, L = 1440 mm e Building-in depth for the gas connection R 1/2...
Installing several ProLine elements Example: 3 ProLine elements a Spring clamps b Spacer bars c Gap between spacer bars and worktop d Cover e ProLine element width less 8 mm f ProLine element width g ProLine element width less 8 mm h Worktop cut-out...
Page 39
Installing several ProLine elements Calculating the worktop cut-out The frames of the ProLine elements overlap the worktop at the outside right and left by 8 mm on each side. Add up the widths of the ProLine elements and subtract 16 mm from this figure. Example: 288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm The ProLine elements are 288 mm, 380 mm or 576 mm wide depending on...
Installation Preparing the worktop Make the worktop cut-out as shown in “Building-in dimensions” or as calculated (see “Installing several ProLine appliances”). Remember to maintain the minimum safety distances (see “Safety distances”). Wooden worktops Seal any cut surfaces on the wood worktops with a special varnish, silicone rubber, or resin to prevent the wood from swelling as a result of...
Page 41
Installation Natural stone worktops You will need heavy duty double-sided tape (not supplied) to secure the spring clamps and spacer bars. Apply silicone to the side and lower edges of the spring clamps and the spacer bars . Then fill gap between spacer bar ...
Page 42
Installation Building in several CombiSets Installing the CombiSet Push the built-in CombiSet to the Feed the mains connection cable side until the holes in the spacer bar down through the cut-out. can be seen. Starting at the front, position the CombiSet in the worktop cut-out.
Page 43
Installation Connecting the ProLine Removing a ProLine element element If the ProLine element is accessible from below, push it upwards to Connect the ProLine element/ remove it. Push the back of the elements to the electrical supply and appliance out first.
Danger of injury. The wires in the mains lead are coloured in accordance with the Miele cannot be held liable for following code: unauthorised installation, Green/yellow = earth maintenance and repair work as this Blue = neutral can be dangerous to users.
Page 45
H 05 VV-F (PVC- To disconnect the appliance from the insulated), available from Miele. mains power supply, do one of the following depending on installation: The connection data is quoted on the data plate.
Gas connection Connection to the gas supply must Attention! According to the Gas be carried out in strict accordance Safety Ordinance of Hong Kong, any with current local regulations. Every gas installation works including the appliance should have its own easily installation of appliances and accessible isolating valve and test connection tubing, must be...
Page 47
Gas connection This appliance is set up for connection to HK town gas (HKTG) (see label on the appliance). Appliances set up for connection to HK town gas have an external gas governor MDG ELITRE (model-no. EL-125, pressure setting at 10 mbar) included. Connecting the hob The hob is supplied with a conical ½"...
In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.
Technical Data Model No CS 1028 G Cut-out dimensions Width 272 mm Depth 500 mm Build-in depth 135 mm Unit Dimensions Width 288 mm Depth 520 mm Electrical connection Voltage 220–240 V Fuse rating 13 A Gas Type HK Town Gas (with external gas governor) Connection Pressure 10 mbar / 1 kPa...
Page 51
Miele (Hong Kong) Limited Miele (Hong Kong) Limited 41/F - 4101, Manhattan Place 香港九龍灣宏泰道23號 23 Wang Tai Road Manhattan Place 41樓4101室 Kowloon Bay 電話: (852) 2610 1025 Hong Kong 傳真: (852) 3579 1404 Tel: (852) 2610 1025 電郵地址: customerservices@miele.com.hk Fax: (852) 3579 1404 網址: www.miele.hk...