free stats
Download Print this page
Cisco CWDM-OADM 1 Series Installation Notes
Cisco CWDM-OADM 1 Series Installation Notes

Cisco CWDM-OADM 1 Series Installation Notes

Passive optical system

Advertisement

Cisco CWDM Passive Optical System
Installation Note
This document provides installation instructions for the Cisco Coarse Wave Division Multiplexer
(CWDM) passive optical system. The CWDM passive optical system product numbers are listed in
Table
1.
Table 1
CWDM Passive Optical System Product Numbers
Product Number
CWDM-CHASSIS-2=
CWDM-MUX8A=
CWDM-OADM4-1=
CWDM-OADM4-2=
CWDM-OADM1-1470=
CWDM-OADM1-1490=
CWDM-OADM1-1510=
CWDM-OADM1-1530=
CWDM-OADM1-1550=
CWDM-OADM1-1570=
CWDM-OADM1-1590=
CWDM-OADM1-1610=
WDM-1300-1550-S=
CAB-SM-LCSC-1M=
CAB-SM-LCSC-5M=
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Copyright © 2004–2005 Cisco Systems, Inc. All rights reserved.
Description
2-slot chassis, 1 RU
8-channel MUX/DEMUX module
4-channel OADM module (1470, 1490, 1510, and
1530 nm)
4-channel OADM module (1550, 1570, 1590, and
1610 nm)
Dual single-channel OADM module, 1470 nm
Dual single-channel OADM module, 1490 nm
Dual single-channel OADM module, 1510 nm
Dual single-channel OADM module, 1530 nm
Dual single-channel OADM module, 1550 nm
Dual single-channel OADM module, 1570 nm
Dual single-channel OADM module, 1590 nm
Dual single-channel OADM module, 1610 nm
1300 nm/1550 nm splitter cable
LC to SC connector cable, 1 m
LC to SC connector cable, 5 m

Advertisement

loading

Summary of Contents for Cisco CWDM-OADM 1 Series

  • Page 1 Cisco CWDM Passive Optical System Installation Note This document provides installation instructions for the Cisco Coarse Wave Division Multiplexer (CWDM) passive optical system. The CWDM passive optical system product numbers are listed in Table Table 1 CWDM Passive Optical System Product Numbers...
  • Page 2: Table Of Contents

    Obtaining Documentation and Submitting a Service Request, page 35 • Overview The Cisco CWDM passive optical system provides optical networking support for high-speed data communication for metropolitan area networks (MANs) over a grid of eight CWDM optical wavelengths in both ring configurations or point-to-point configurations.
  • Page 3 The 4-channel OADM modules are equipped with a monitor port that allows you to attach a power meter or an optical spectrum analyzer to assist you in monitoring and troubleshooting the network. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 4 Yellow CWDM-OADM1-1570= Dual single-channel OADM (1570 nm) Orange CWDM-OADM1-1590= Dual single-channel OADM (1590 nm) CWDM-OADM1-1610= Dual single-channel OADM (1610 nm) Brown Table 3 provides a comparison of the CWDM passive device types. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 5 INVISIBLE LASER DO NOT VIEW Figure 6 Dual Single-Channel OADM Front Panel (1570 nm) CISCO WDM SERIES NETWORK NETWORK CWDM- OADM1- WEST EAST 1570 MONITOR 1570 1570 MONITOR INVISIBLE LASER DO NOT VIEW Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 6 INVISIBLE LASER DO NOT VIEW Figure 11 Dual Single-Channel OADM Front Panel (1470 nm) CISCO WDM SERIES NETWORK NETWORK CWDM- OADM1- WEST EAST 1470 MONITOR 1470 1470 MONITOR INVISIBLE LASER DO NOT VIEW Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 7 CWDM SFP transceiver which uses an LC connector. Figure 13 CWDM GBIC Color label identifying laser wavelength Optical bore dust plug Alignment groove Receive optical bore Spring clip Color dot identifying laser wavelength Transmit optical bore Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 8 Brown For information on installing, removing, and maintaining the CWDM GBIC and SFP transceivers, refer to the Cisco CWDM GBIC and CWDM SFP Installation Note that accompanies the CWDM GBIC and CWDM SFP transceivers. Cisco CWDM Passive Optical System Installation Note...
  • Page 9: Safety Overview

    éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 10 Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 11 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 12 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 13 Safety Overview Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 14 Other fiber-optic ports have been tested and comply with the Class 1 limits of IEC 60825-1 and Class 1 limits of 21 CFR 1040.10 (with considerations pursuant to FDA Laser Notice 50, dated July 26, 2001). Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 15: Installing The Cwdm Passive Optical System

    L brackets with the mounting holes in the equipment rack to ensure that the 2-slot chassis is mounted straight and level. Use a level or tape measure to verify that the chassis is positioned level in the rack. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 16 Align the CWDM OADM module with the slot on the 2-slot chassis. (See Figure 16.) Step 1 Figure 16 Installing a CWDM OADM Module NETWORK PASS 1550 1590 CWDM- OADM4-2 MONITOR MONITOR 1570 1610 NETWORK PASS 1470 1510 CWDM- OADM4-1 MONITOR MONITOR 1490 1530 Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 17 Installing and Removing CWDM GBIC and CWDM SFP Transceivers For information on installing, removing, and maintaining the CWDM GBIC transceivers and CWDM SFP transceivers, refer to the Cisco CWDM GBIC and CWDM SFP Installation Note that accompanies the CWDM GBIC and CWDM SFP transceivers.
  • Page 18: Connecting The Cwdm Passive Optical System To Your System

    CWDM GBIC transceivers are equipped with SC connectors. To make connections to the LC connectors on the OADM modules, you must use an LC to SC patch cable (Cisco part number CAB-SM-LCSC-1M= [1 meter cable], CAB-SM-=LCSC-5M= [5 meter cable], or an equivalent patch cable).
  • Page 19 Inspect and clean the connector’s fiber-optic end-faces. Refer to the Tip below for a pointer to the fiber-optic inspection and cleaning white paper. For complete information on inspecting and cleaning fiber-optic connections, refer to the whitepaper at this URL: http://www.cisco.com/en/US/tech/tk482/tk607/technologies_white_paper09186a0080254eba.shtml Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 20 CWDM GBIC transceivers are equipped with SC connectors. To make connections to the LC connectors on the OADM modules, you must use an LC to SC patch cable (Cisco part number CAB-SM-LCSC-1M= [1 meter cable], CAB-SM-=LCSC-5M= [5 meter cable], or an equivalent patch cable).
  • Page 21 CW DM OA DM PA SS MO NIT OR 155 0 MO NIT OR 159 0 157 0 161 0 4-Channel OADM module LC connectors To network To optional optical spectrum analyzer Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 22 If you are planning to monitor your network with an optical power meter or an optical spectrum analyzer, Step 6 connect your meter or analyzer to the MONITOR port on the OADM. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 23 Step 1 router system if you have not already done so. For more information on installing CWDM GBIC transceivers and SFP transceivers, refer to the Cisco CWDM GBIC and CWDM SFP Installation Note. Note Clean all fiber-optic plugs on the cables before inserting the plugs into the fiber-optic connectors.
  • Page 24 Inspect and clean the connecor’s fiber-optic end-faces. Refer to the Tip below for a pointer to the Step 3 fiber-optic inspection and cleaning white paper. For complete information on inspecting and cleaning fiber-optic connections, refer to the white-paper document at this URL: http://www.cisco.com/en/US/tech/tk482/tk607/technologies_white_paper09186a0080254eba.shtml Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 25: Specifications

    CWDM GBIC transceivers are equipped with SC connectors. To make connections to the LC connectors on the multiplexer/demultiplexer device, you must use an LC to SC patch cable (Cisco part number CAB-SM-LCSC-1M= [1 meter cable], CAB-SM-LCSC-5M= [5 meter cable], or an equivalent patch cable).
  • Page 26 NETWORK Tx EAST/WEST Monitor Insertion Loss NETWORK Tx/Rx WEST/EAST— 23 dB (maximum) TAP Tx/Rx WEST/EAST WDM-1300-1550-S Pass 1310-nm Insertion Add/Drop 1.2 dB (maximum) Loss Pass 1550-nm Insertion Add/Drop 0.8 dB (maximum) Loss Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 27: Translated Safety Warnings

    Apenas pessoal treinado e qualificado deve ser autorizado a instalar, substituir ou fazer a revisão deste equipamento. ¡Advertencia! Solamente el personal calificado debe instalar, reemplazar o utilizar este equipo. Varning! Endast utbildad och kvalificerad personal bör få tillåtelse att installera, byta ut eller reparera denna utrustning. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 28 Translated Safety Warnings Aviso Somente uma equipe treinada e qualificada tem permissão para instalar, substituir ou dar manutenção a este equipamento. Advarsel Kun uddannede personer må installere, udskifte komponenter i eller servicere dette udstyr. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 29 Aviso O descarte definitivo deste produto deve estar de acordo com todas as leis e regulamentações nacionais. Advarsel Endelig bortskaffelse af dette produkt skal ske i henhold til gældende love og regler. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 30 Laserstråling i klasse 1M i åpen stilling. Skal ikke ses direkte med optiske instrumenter. Aviso Radiação laser classe 1M quando aberto. Não olhar diretamente com instrumentos ópticos. ¡Advertencia! Los productos láser Clase 1M emiten radiación una vez abiertos. No los mire directamente con instrumentos ópticos. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 31 Prodotti laser di Classe I (CDRH) e Classe 1M (IEC). Advarsel Klasse I (CDRH) og klasse 1M (IEC) laserprodukter. Aviso Produtos laser Classe I (CDRH) e Classe 1M (IEC). ¡Advertencia! Productos láser de Clase I (CDRH) y Clase 1M (IEC). Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 32 Non fissare il raggio od osservarlo in modo diretto con strumenti ottici. L’osservazione del fascio laser con determinati strumenti ottici (come lupette, lenti di ingrandimento o microscopi) entro una distanza di 100 mm può provocare danni agli occhi. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 33 Att titta på laserstrålen med vissa optiska instrument (t.ex. lupper, förstoringsglas och mikroskop) från ett avstånd på 100 mm kan skada ögonen. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 34 La aplicación de controles, ajustes y procedimientos distintos a los especificados puede comportar una exposición peligrosa a la radiación. Varning! Om andra kontroller eller justeringar än de angivna används, eller om andra processer än de angivna genomförs, kan skadlig strålning avges. Cisco CWDM Passive Optical System Installation Note 78-16565-02...
  • Page 35: Obtaining Documentation And Submitting A Service Request

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 36 “Obtaining Documentation and Submitting a Service Request” section on page CCSP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, Cisco, the Cisco Certified...