Advertisement
Quick Links
T
ECHNICAL INFORMATION
For Models
Description
C
ONCEPTION AND MAIN APPLICATIONS
LS800D is the 18V Cordless version of Model LS0810
(210mm Miter saw) developed for works at the site far from A/C supplies.
This model is equipped with Electric Brake for quick stop.
S
pecifications
Motor
Battery
Charger used for this Model
No load speed
for fixed cutting speed
Electronc
features
for soft start
Blade diameter
Arbor diameter
Bevel Angle
Miter Angle
Bevel Angle
Cutting
0°
Capacity
left
45°
Net weight
S
tandard equipment
Vertical vise 1
Lock-off button(spare) 2
Dust bag 1
Chip saw blade 216 (40T) 1
Holder metal fittings 2
Battery Cover
1
Box wrench 10 1
Sub Plate Set
1
Set square(triangle) 1
O
ptional accessories
Holder assembly
Horizontal vise
Set plate
Holder fitting set (for long stock)
Chip saw blade(various types)
Battery 1822(Ni-Cd,18V,2.0Ah)
Battery 1833(Ni-MH,18V,2.0Ah)
Fast charger DC1801
LS800D
210mm (8-1/4") Cordless Miter Saw
DC 18V magnet motor
Battery 1822(Ni-Cd,18V,2.0Ah) for LS800DWA
Battery 1833(Ni-MH,18V,2.2Ah) for LS800DWB
DC1801
210mm(8-1/4")-216mm(8-1/2")
Europe
30mm(1-3/16")
Other Countries
25.4mm(1")
left
left
Miter Angle
0°
left and right
45°
0°
left and right
45°
2000 rpm.
No
No
45°
-
0°
52°
- right
52°
61mm(2-3/8") x 122mm(4-13/16")
61mm(2-3/8") x 85mm(3-3/8")
45mm(1-3/4") x 122mm(4-13/16")
45mm(1-3/4") x 85mm(3-3/8")
9.3Kg(20.5lbs) including the weight of battery
Product
Advertisement
Related Manuals for Makita LS800D
Summary of Contents for Makita LS800D
- Page 1 210mm (8-1/4") Cordless Miter Saw ONCEPTION AND MAIN APPLICATIONS LS800D is the 18V Cordless version of Model LS0810 (210mm Miter saw) developed for works at the site far from A/C supplies. This model is equipped with Electric Brake for quick stop.
-
Page 2: Grease Application
(1)GREASE APPLICATION Apply Makita grease on the following rotating/sliding surfaces before assembling. Up/Down shaking fulcrum of Blade case, Arm, Rod 16-100 Arm rotation part: Arm, Sub arm, L/R rotating support and sliding parts of Turn base: Turn base, Boss in the center of base, Slide plate,... - Page 3 (3)ASSEMBLY OF SAFETY COVER 1) Insert Spiral spring 26 into the oval hole in Safety cover , making spring's tip meet the hole. 2) Making Center washer meet four bosses in Safety cover , and attach it. (See Fig.1) 3) By putting the tip of Spiral spring 26 into Center cover hole, attach Center cover as shown in Fig. 2. 4) Attach Center plate, making it meet four bosses in Safety cover, and tighten it with Pan head screw M5.
- Page 4 (6)ASSEMBLY OF POSITIVE LOCK UNIT ON TURN BASE When Lock pin is located in the groove on the turn base, lock pin has to be so installed that it stand out from the support plate by 2mm - 3mm. Lock lever Support plate 2mm - 3mm To be adjusted with this screw...
- Page 5 ircuit diagram Lead wire has to be nonnectee as below. Switch White Terminal(+) Battery holder Brush holer Black Terminal(-) Black Black Insulated connector nterchangeability The following spare parts have an interchangeability with the existing models. Section Spare parts The existing model No. Gears Spindle LS0711...