Advertisement
Quick Links
Advertisement
Related Manuals for Motorola PMNN4439
Summary of Contents for Motorola PMNN4439
- Page 1 APX Radios AA Lithium/ AA Alkaline Replaceable Battery Pack PMNN4439 Accessories...
- Page 2 blank.fm Page 1 Wednesday, July 31, 2013 9:53 AM...
- Page 3 AA LITHIUM / AA ALKALINE REPLACEABLE BATTERY PACK Foreword The Motorola APX Radios AA Lithium/ AA Alkaline Replaceable Battery Pack is an accessory that allows Motorola APX radios to operate using standard AA batteries. This allows the radio to be...
- Page 4 Additionally, the unit has been tested and optimized with the following battery manufacturer: Energizer. The Motorola APX Radios AA Lithium Replaceable Battery Pack is compatible with Motorola APX Radio. Use only 12 pieces 1.5 V Lithium Primary AA Batteries or 12 pieces 1.5 V...
- Page 5 68012010015_a.fm Page 3 Friday, August 2, 2013 10:58 AM Wrong switch position will cause incorrect Low Battery Alert Indication. Use of this battery pack will automatically select the radio’s low-power setting. For proper operation, the radio’s low-power setting must be turned to 2 W or less.
-
Page 6: Important Safety Instructions
68012010015_a.fm Page 4 Friday, August 2, 2013 10:58 AM IMPORTANT SAFETY INSTRUCTIONS This document contains important safety and operating instructions. Please read these instructions carefully and save them for future reference. OPERATIONAL SAFETY GUIDELINES Lithium batteries may explode if disposed of in fire. - Page 7 68012010015_a.fm Page 5 Friday, August 2, 2013 10:58 AM For your protection, store battery pack in a climate controlled location when not in use. DO NOT store the battery pack with battery inserted. DO NOT attempt to charge the battery pack.
- Page 8 68012010015_a.fm Page 6 Friday, August 2, 2013 10:58 AM OPERATION INSTRUCTION Installing the APX Clamshell Battery Pack To The Radio Slide in the battery pack towards the radio chassis slot as shown below. Push the bottom of battery pack until both latches snap in place.
- Page 9 68012010015_a.fm Page 7 Friday, August 2, 2013 10:58 AM Removing the APX Clamshell Battery From The Radio Push on the latch buttons on both sides as Figure 2. Then slide out the battery pack from the radio. Figure 2: Push and slide out the battery...
- Page 10 68012010015_a.fm Page 8 Friday, August 2, 2013 10:58 AM Removing the APX Clamshell Battery Tray From The Housing Push on the push buttons on both sides as shown in Figure 3. Figure 3: Push the push buttons...
- Page 11 68012010015_a.fm Page 9 Friday, August 2, 2013 10:58 AM Slide up the C-clip as Figure 4. Figure 4: Slide up the C-clip...
- Page 12 68012010015_a.fm Page 10 Friday, August 2, 2013 10:58 AM Hold on the Tray bottom cover and slide it out. Figure 5: Hold tray button and slide...
- Page 13 68012010015_a.fm Page 11 Friday, August 2, 2013 10:58 AM Inserting AA Batteries Into The Battery Tray Insert the 6 new batteries in place following the markings on the battery tray for correct battery polarity. All batteries are inserted with the same orientation. Insert another 6 new batteries on the opposite side of the battery tray.
- Page 14 68012010015_a.fm Page 12 Friday, August 2, 2013 10:58 AM Figure 7: Place batteries with the same orientation DO NOT mix new and used batteries in the same batch as this will adversely affect performance. DO NOT mix Lithium Primary batteries and Alkaline Primary batteries in the same batch as this will adversely affect performance.
- Page 15 68012010015_a.fm Page 13 Friday, August 2, 2013 10:58 AM Installing The Battery Tray To The Housing Slide the battery tray into the housing. Figure 8: Slide into the housing...
- Page 16 68012010015_a.fm Page 14 Friday, August 2, 2013 10:58 AM Push the C-clip in position until it snaps into the housing. A gentle “click” sound should be heard when the C-clip is fully latched in position. Figure 9: Push C-clip into the housing...
- Page 17 68012010015_a.fm Page 15 Friday, August 2, 2013 10:58 AM Ensure that the Battery-Type - Selector switch is toggled to the correct position according to the type of battery being installed: Li = Lithium Primary Battery Alk = Alkaline Primary Battery Wrong switch position will cause incorrect Low Battery Alert Indication.
-
Page 18: Battery Pack Maintenance
68012010015_a.fm Page 16 Friday, August 2, 2013 10:58 AM BATTERY PACK MAINTENANCE Periodically inspect and clean the battery contacts. This is recommended after each use. Inspect for debris or foreign objects that could interfere with gasket and sealing surface. Periodically clean gasket and sealing surface. - Page 19 68012010015_a.fm Page 17 Friday, August 2, 2013 10:58 AM BATTERY PACK TROUBLESHOOTING The battery pack is equipped with a thermal protection device that can trip if a foreign object is W A R N I N G shorting across contacts. This device resets automatically shortly after the fault is removed.
-
Page 20: Specification
68012010015_a.fm Page 18 Friday, August 2, 2013 10:58 AM Inspect for debris or foreign objects that could interfere with gasket and W A R N I N G sealing surface. No further troubleshooting should be performed. DO NOT attempt to disassemble the battery pack. - Page 21 68012010015_a.fm Page 19 Friday, August 2, 2013 10:58 AM Approximate Without 9.5 oz Weight Batteries (270 g) With 15.9 oz Lithium (450 g) Primary Batteries With 19.4 oz Alkaline (550 g) Primary Batteries...
- Page 22 68012010015_a.fm Page 20 Friday, August 2, 2013 10:58 AM NOTES...
- Page 23 backcover_68012010015_a.fm Page 1 Tuesday, July 9, 2013 2:...
- Page 24 SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. © 2013 Motorola Solutions, Inc. All rights reserved. *68012010015* 68012010015-A...