Advertisement
Quick Links
Congratulations on your choice of the Motorola LUMO150B Modular Light. The Motorola LUMO150B combines
high performance Flashlight / Lantern and Bluetooth Speaker. Please take a few moments to read this user guide to ensure that
you get the best performance.
Included
1 X Motorola Flashlight Lantern
1 X Bluetooth Speaker Module
1 X USB to micro-USB cable (power charger only)
H
H
Product Specifications
Module
Size
Operation voltage
Batteries Type
Battery quantity
LED
Lumens
Operation button
Max. operation time
Charging current
Low Power LED indication
Charging LED indication
Full Charging LED indication
Charging time (1300mA)
Charging USB port
Water proof
Modular Light
LUMO150B
Flashlight / Lantern
Bluetooth Speaker
Ø51.5*153mm
Ø51.5*64mm
3-6V
3-6V
AA Ni-MH rechargeable
AA Ni-MH rechargeable
4pcs
NIL
Cree XPG2
NIL
Max.180Lm
NIL
M logo button
ON / OFF
>5H
>5H
NIL
Max.250mA
NIL
Voice indicator
NIL
Red/Green alternatively
NIL
Green LED on
NIL
Min.8H
NIL
Micro USB
IPX4
IPX4
PAGE 1/4
Flashlight/Lantern with Bluetooth Speaker Module
1. Unscrew the Bluetooth Speaker module by turning counterclockwise 1 & 3 . Take out the battery
holder 2 and insert 4 AA alkaline or rechargeable batteries.
2. Position batteries according to polarity marking 2 , and screw the Bluetooth Speaker module by
turning clockwise.
3. To turn the Flashlight / Lantern on, pull the globe and press the "M" button a , the flashlight will
always turn on at the brightest setting with the lantern mode. Hold the "M" button a down can dim
or brighten. The light will flash twice at the lowest / brightest level.
- Do not attempt to charge alkaline batteries.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
4. To enable flashlight mode, collapse the globe.
5. Press and hold the "ON/OFF" button b for 2 to 3 seconds to switch on the Bluetooth Speaker module.
Voice reminder after the Bluetooth Speaker being activated:
1. When the Bluetooth Speaker module is on, voice indicator will say "Hello, This system is ON.
Enter pairing mode".
2. When pairing is completed, the voice indicator will say "Connected".
3. When it is disconnected, the voice indicator will say "Disconnected, Enter pairing mode".
4. When the Bluetooth Speaker cannot be connected successfully, the voice indicator will say
"Enter pairing mode".
5. Press and hold the "ON/OFF" button b again to switch o the Bluetooth Speaker module, the
voice indicator will say "Bye Bye".
6. When the battery is low, the voice indicator will say "Low Battery".
If the Bluetooth Speaker module did not pair with any devices, the voice indicator will say "Enter
pairing mode" every 3 minutes until the module is paired.
If the Bluetooth Speaker module cannot pair with any devices within 15 minutes, the voice
indicator will say "Bye Bye" and switch o the unit automatically.
6. To disconnect the Bluetooth Speaker connection by holding the "ON/OFF" button b for 2 seconds.
7. When the Flashlight / Bluetooth Speaker at low battery level, the voice indicator will say "Low Battery"
to remind the unit needs to be re-charged.
8. Remove the USB charger cover and connect with the USB cable to charge the unit. The unit is
charging if the green / red light c flashing alternatively. For example, it will take around 7 hours to
fully re-charge a 1300mAh Ni-MH battery and the green light is on when the unit is being fully
charged.
Modular Light
LUMO150B
PAGE 2/4
Advertisement
Summary of Contents for Motorola LUM0150B
-
Page 1: Product Specifications
Flashlight/Lantern with Bluetooth Speaker Module Congratulations on your choice of the Motorola LUMO150B Modular Light. The Motorola LUMO150B combines high performance Flashlight / Lantern and Bluetooth Speaker. Please take a few moments to read this user guide to ensure that you get the best performance. - Page 2 (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or ZENUS, are - Reorient or relocate the receiving antenna.