thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: pLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OpERATIONAL REQUIREMENTS, WARNINGS, AND
CAUTIONS. USE THIS pRODUCT CORRECTLY, AND WITH CARE FOR THE pURpOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR pERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.
1. SAFETY INSTRUCTIONS
1.1 GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when
using this equipment.
Familiarise yourself with the application and limitations of the oil drainer, as well as the potential hazards.
WARNING! Disconnect the drainer from the air supply before servicing or performing any maintenance.
Maintain the drainer in good condition (use an authorised service agent).
Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the
warranty.
Keep the work area clean, uncluttered and ensure there is adequate lighting.
Keep the drainer clean for best and safest performance.
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
Keep children and unauthorised persons away from the working area.
WARNING! Ensure correct air pressure is maintained and not exceeded.
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use, and ensure that all
connections are secure.
DO NOT use the drainer for any purpose other than that for which it is designed.
DO NOT operate the drainer if any parts are damaged or missing as this may cause failure and/or personal injury.
DO NOT stand on the drainer.
DO NOT adjust or tamper with the safety valve.
DO NOT move the drainer by the hose, or yank the hose from the air supply.
DO NOT place attachments close to your face (especially eyes, ears, etc.) and do not point hose at other
persons or animals.
DO NOT allow untrained persons to operate the drainer.
DO NOT operate the drainer when you are tired or under the
influence of alcohol, drugs or intoxicating medication.
DO NOT leave the drainer operating unattended.
DO NOT direct air from the air hose at yourself or others.
When not in use disconnect from the air supply, vent reservoir
and store in a safe, dry, childproof area.
Dispose of waste oil in accordance with local authority
regulations.
WARNING! DO NOT pollute the environment by allowing
uncontrolled discharge of waste oil.
DANGER! DO NOT release drain pan clamp lever when
there is pressure in the reservoir as pipe and drain pan will
be propelled upward with force. This could result in
damage and/or serious injury.
2. INTRODUCTION & SpECIFICATION
Steel fabricated 45ltr reservoir. Fitted with adjustable telescopic arm
designed to fit under motorcycle while on ramp. Suitable for use on
all motorcycles and quads with a minimum under body clearance of
140mm. Ideal for performing multiple oil changes. Fitted with
reservoir oil level indicator and pressure gauge. Supplied with 1.9mtr
air powered oil discharge hose. Heavy duty wheels and castors for
easy mobility around garage/workshop.
Model no: . . . . . . . . . . . . . . . . AK460DX
Capacity:. . . . . . . . . . . . . . . . . . . . . 45ltr
Min. Height to Pan:. . . . . . . . . . . 860mm
Max. Height to Pan: . . . . . . . . . 1100mm
Gravity Feed: . . . . . . . . . . . . . . . . . . Yes
Suction Probe: . . . . . . . . . . . . . . . . . no
Gravity Discharge: . . . . . . . . . . . . . . no
Air Discharge:. . . . . . . . . . . . . . . . . . Yes
© Jack Sealey limited
InStRuCtIonS FoR:
MOTORCYCLE OIL DRAINER
MoDEl no: Ak460DX
fig. 1
Original Language Version
AK460DX
Issue no. 1 - 10/04/13