Page 1
Dell ™ W2600 26 Dell ™ W2600 26” Wide LCD Monitor (With TV Functionality) W2600 Model W2600 w w w . d e l l . c o m / j p s u p p o r t . d e l l . c o m...
Page 2
ワイド液晶モニタ 機能付 オーナーズマニュアル W2600 モデル w w w . d e l l . c o m / j p | s u p p o r t . j p . d e l l . c o m...
About Your Wide LCD Monitor Front View IR receiver Senses the signal from the remote control Power indicator light (LED) The light is blue when the wide LCD monitor is on and amber when the wide LCD monitor is in power save mode About Your Wide LCD Monitor...
Right Side View Power button Push to turn the wide LCD monitor on and off OSD menu button Push to enable the on-screen display (OSD) Volume button Push to decrease the volume or navigate through the on-screen display (OSD) Volume button Push to increase the volume or navigate through the OSD Channel button Push to select the previous channel or navigate through the...
Left Side View Composite video connector (AV1) Use the side composite connector for devices you connect occasionally such as a video game system R (composite right audio Use the audio connector if you have connected a device to connector) composite connector (AV1) L (composite left audio connector) Use the audio connector if you have connected a device to composite connector (AV1) Card reader panel...
Bottom View Power connector Connect your power cord. Composite video and audio Connect devices such as a VCR or DVD player. connector (AV2) DVI audio connector (L) Use the DVI audio connector if you have connected a device to the DVI connector. VGA connector Use the VGA connector to use your wide LCD monitor as a monitor for your computer.
Package Contents NOTE: Component cables are not included with the wide LCD monitor . If you need additional cables, contact Dell. Remote Control AAA batteries (2) Power Cable About Your Wide LCD Monitor...
Page 59
S-Video cable Audio cable (2) Composite cable DVI cable PC Audio cable About Your Wide LCD Monitor...
VGA cable Documentation Caring for Your Wide LCD Monitor CAUTION: Only a licensed technician should service the wide LCD monitor . Do not disassemble the wide LCD monitor . NOTE: Before cleaning the wide LCD monitor , unplug it from the electrical outlet. •...
Setting Up Your Wide LCD Monitor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions Product Information Guide located in the Proper Location for Your Wide LCD Monitor Consider the following environmental factors when you are deciding where to put your wide LCD monitor : •...
Page 63
Quality Cable and Connector When to Use Good Composite carries the video signal through a single cable. If you are using a composite video connector, you also need to connect composite audio cables. To locate the connector, see "Left Side View" on page 55 and "Bottom View"...
Page 64
Using the ANT/Cable (Coaxial) Connector Turn off the wide LCD monitor and unplug the power cord. Connect the coaxial cable to the ANT/Cable connector of the wide LCD monitor . Plug in the power cord for the wide LCD monitor and turn on the wide LCD monitor . Enter the on-screen display (OSD) and select TV .
Page 65
Connect your device including the audio cables. Plug in the power cords for the wide LCD monitor and devices and turn them on. Enter the OSD and select the proper composite input. See "Input Select Menu" on page 74. Using the S-Video Connector Turn off the wide LCD monitor and unplug the power cord.
Page 66
Using Component Connectors Turn off the wide LCD monitor and unplug the power cord. Connect your device including the audio cables. Plug in the power cords for the wide LCD monitor and devices and turn them on. Enter the OSD and select the proper component input. See "Input Select Menu" on page 74. Using the D4 Connector Turn off the wide LCD monitor and unplug the power cord.
Page 67
Using the DVI Connector NOTE: Only one connector can be used for a computer, either VGA or DVI. Turn off the wide LCD monitor and unplug the power cord. Remove the back cover from the wide LCD monitor by pulling the cover toward you and lifting it away.
Page 68
Replace the back cover. Plug in the power cords for the wide LCD monitor and devices and turn them on. Enter the OSD and select DVI. See "Input Select Menu" on page 74. Using VGA (PC Analog) You can use your wide LCD monitor as a computer monitor using a VGA connector NOTE: Only one connector can be used for a computer, either VGA or DVI.
Page 69
Connect the blue VGA cable to your wide LCD monitor and to your computer. Connect the green audio cable to the connector on the wide LCD monitor and to your computer. Replace the back cover. Plug in the power cords for the wide LCD monitor and devices and turn them on. Enter the OSD and select the VGA.
Your Remote Control Installing Batteries Before you can use your remote control, install two-AAA batteries. Open the battery cover. Install the batteries. Make sure that you match the + and - on the batteries with the + and - symbols in the battery compartment. Close the battery cover.
Page 72
Power Button Turns the wide LCD monitor on and off Number buttons Press to select a channel Mute Press to turn off the sound. Press again to turn on the sound CH (up icon) Push to view the next channel In the OSD, use the channel button to navigate through the menus in the on-screen display (OSD) Enter...
Input Select NOTE: Future preprogrammed universal remote controls may be able to control more functions. You can program universal remote controls to work with your Dell wide LCD monitor in the following ways: • If the remote control has a search function, this function may be used to find the correct code.
Using the On-Screen Display Your wide LCD monitor has an on-screen display (OSD) that allows you to select the proper input source, make adjustments to the image and audio settings, select to view Picture-In-Picture, Picture-Outside-Picture, and Picture-By-Picture. The OSD also allows you to chose how to view the images when using the card reader and to make adjustments to the image if you are using the wide LCD monitor as your computer monitor.
After you have made your selections, select the Exit. To exit the OSD, press Menu on the remote or select Exit from the main menu. Selecting Your OSD Language Press Menu to enter the OSD. Select Setup. In the Setup menu, select Language and select the language that you want the OSD to appear in.
AV2 — Select when you have a video device, such as a DVD player, connected to the composite connector on the back of the wide LCD monitor . See "Bottom View" on page 56 for the location of the composite connector.
Audio Midnight Mode Evens out the large — AUDIO volume variations between voice and BACK action scenes. SRS TruSurround XT Delivers virtual — surround sound over two speakers from MIDNIGHT MODE any source, which creates a wider sound EQUALIZER MODE PERSONAL with deep rich bass.
For POP, you can select from three different POP options: • POP1 one window — • POP3 three windows — • POP12 twelve windows — POP Scan Mode allows you to select Sequential or Float. Sequential mode plays the source for selected channels that appear in the windows.
OSD Setup OSD setup allows you to adjust the appearance of the OSD, set the channels when in wide LCD monitor mode, change the language of the OSD (see "Selecting Your OSD Language" on page 74), and restore factory settings. Use OSD Hold Time to increase or decrease the amount SETUP of time the OSD appears.
Page 80
• Smart Media • Multimedia Card (MMC) NOTE: To purchase a card reader, contact Dell. IMAGE MANAGEMENT The Image Management menu allows you select how to display your photos, including viewing the photos as BACK a slide show, rotating photos, selecting different...
Troubleshooting Your Wide LCD Monitor CAUTION: If at any time you see smoke or sparks coming from your wide LCD monitor , unplug the wide LCD monitor immediately and contact Dell. Do not try to perform any troubleshooting steps. Troubleshooting Tips NOTE: Some problems may be related to devices you have connected to your wide LCD monitor .
General Problems Problem Possible Solution Poor picture quality while watching wide LCD Check the aspect ratio settings in the OSD. Press the Menu button on the remote control and select Size. For monitor and using a device such as a DVD player or a VCR more information on using the OSD, see "Using the On- Screen Display"...
Page 84
Problem Possible Solution Poor picture quality when using a device Ensure wide LCD monitor is selected as the input connected to the ANT/Cable (coaxial) source in the Input Select menu. See "Input Select connector Menu" on page 74 for more information. Press Menu on the remote control, select Setup, and then select Channel Setup.
Page 85
Problem Possible Solution No sound Ensure mute is not turned on. Pressing the Mute button on the remote control turns the mute function on and off. If only certain wide LCD monitor channels do not have sound, verify that the proper source is selected in the Input Select menu.(For more information, see "Input Select Menu"...
Page 86
Double image or no image with DVD Turn off the progressive scan on the DVD player. Your Dell™ wide LCD monitor offers built-in deinterlacer that is equal to or better quality than the deinterlacer on your DVD player. For more information about progressive scan...
Out of Range Check the optimal resolution settings. You may need to download a new video driver. For more information, go to support.dell.com. No Video Input Check all cables are properly connected. Ensure the proper source is selected in the Input Select menu.
Message Possible Solution No Card Detected in Card Reader Remove and reinstall the card. Ensure you are using a card that is supported by the card reader. Your card reader supports the following card types: • Compact Flash • Secure Digital •...
Turn on the wide LCD monitor . If the wide LCD monitor cannot sense a video signal and is working correctly, the floating "Dell - Self-Test Feature Check" dialog box appears on the screen (against a black background). While in self-test mode, the power light remains green and the self-test pattern scrolls through the screen continually.
Page 90
Problem Possible Solution No audio Ensure the green audio cable is connected to audio connector on the wide LCD monitor and on the computer. For the location of the connector on the wide LCD monitor see, "Using VGA (PC Analog)." on page 67." See your computer documentation for the location of connectors on your computer.
Specifications for Your Wide LCD Monitor General Model number W2600 LCD wide LCD monitor Display type TFT Active Matrix (Color TFT LCD) Screen size 26 inches Viewable area 566.4 339.8 mm (22.3 inches 13.38 inches) Image aspect ratio Wide screen...
Page 93
Picture-In-Picture Picture-In-Picture (PIP) Picture-Outside-Picture (POP) Picture-By-Picture (PBP) Number of Tuners 2 analog Brightness (typical) 450 nits (typical) Contrast Ratio 500:1 (typical) Response time (black:white) 25 ms (typical) Viewing Angle Horizontal +/- 85 degrees Vertical +/- 85 degrees Inputs Video Composite (CVBS) two (side and bottom) S-Video two (side and bottom)
Page 94
Audio Effects SRS TruSurround XT Midnight Mode Speakers (integrated) 15 watts/channel 30 watts total Specifications for Your Wide LCD Monitor...
Page 95
Specifications for Your Wide LCD Monitor...