Advertisement
Quick Links
EAR DEFENDERS
MODELS: SSP18, SSP18F
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIRE-
MENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE
FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL
INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1. GENERAL SAFETY
F
WARNING! Put the ear defenders on before exposing yourself to noise and wear at all
times during exposure to excess noise levels.
p
Before use, check that the ear defenders will provide the required level of noise attenuation.
!
Please see Attenuation table overleaf.
Inspect the ear defenders to ensure there are no tears or snags and that they are in good condition.
!
1.2. PERSONAL PRECAUTIONS
!
Ensure there is another person within sight close enough to come to your aid should a problem arise
when working.
2. APPLICATION
2.1 When worn properly and given adequate care, the SSP18 and SSP18F provide excellent
protection which filters the high levels of noise that are encountered in an industrial environment.
3. USE
F
WARNING! These ear defenders are of “normal size range”
complying with BSEN352-1. They are designed to fit the
p
majority of wearers. If in doubt, seek professional advise.
3.1. Extend the headband to maximum “open” position and place the
cups over the ears with the headband passing over the head.
3.2. Settle the headband in position on the head while adjusting
the height of the ear cups until they feel comfortable and the
headband rests on top of the head to support the muffs.
3.3. The cushions should be a snug fit against the head.
3.4. The pressure of the ear defenders against the head can be
adjusted to by bending the headband thereby ensuring an
effective noise seal.
INSTRUCTIONS FOR
SSP18, SSP18F - 1 - 130202
EAR DEFENDERS
MODELS: SSP18, SSP18F
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIRE-
MENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE
FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY, AND WILL
INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
1.1. GENERAL SAFETY
F
WARNING! Put the ear defenders on before exposing yourself to noise and wear at all
times during exposure to excess noise levels.
p
Before use, check that the ear defenders will provide the required level of noise attenuation.
!
Please see Attenuation table overleaf.
Inspect the ear defenders to ensure there are no tears or snags and that they are in good condition.
!
1.2. PERSONAL PRECAUTIONS
!
Ensure there is another person within sight close enough to come to your aid should a problem arise
when working.
2. APPLICATION
2.1 When worn properly and given adequate care, the SSP18 and SSP18F provide excellent
protection which filters the high levels of noise that are encountered in an industrial environment.
3. USE
F
WARNING! These ear defenders are of “normal size range”
complying with BSEN352-1. They are designed to fit the
p
majority of wearers. If in doubt, seek professional advise.
3.1. Extend the headband to maximum “open” position and place the
cups over the ears with the headband passing over the head.
3.2. Settle the headband in position on the head while adjusting
the height of the ear cups until they feel comfortable and the
headband rests on top of the head to support the muffs.
3.3. The cushions should be a snug fit against the head.
3.4. The pressure of the ear defenders against the head can be
adjusted to by bending the headband thereby ensuring an
effective noise seal.
INSTRUCTIONS FOR
SSP18, SSP18F - 1 - 130202
Advertisement
Related Manuals for Sealey SSP18
Summary of Contents for Sealey SSP18
- Page 1 MODELS: SSP18, SSP18F Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.
- Page 2 Directive Relating to Personal Directive Relating to Personal Protective Equipment Protective Equipment For Jack Sealey Ltd. Sole importer into the UK of Sealey For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products. Power Products. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.