Existing network LED On: Connected to the router/AP. Off: Not connected to the router/AP. Move closer Need to move RP-AC55 closer to the router/AP. Move away slightly Need to move RP-AC55 slightly away from the router/AP. U14322_RP-AC55_QSG_V3.indb 3 2018/5/22 18:09:59...
1. Press the WPS button on the router/AP. Method Two: Connecting through GUI 2. Press the WPS button of RP-AC55 for more than five (5) sec- onds until the Power LED starts to blink. 1. Use a Wi-Fi enabled device, such as your desktop PC/note- book/tablet, to find and connect to ASUS_RPAC55/ASUS_ RPAC55_5G wireless network.
Page 4
Moving the Repeater as that of your router/AP, with the SSID ending with _RPT or _RPT5G. You can change these default settings to a unique SSID • When the connection is complete, place your RP-AC55 and password. between the router/AP and the wireless device to get the best performance.
Q3: Why is it that I cannot see the login page after entering http://repeater.asus.com in the browser? • E nsure that your computer is connected to your RP-AC55 network only, and set your computer to Obtain an IP address au- tomatically. If you still cannot find the login page, please download the ASUS Device Discovery utility. You can download the utility for Windows and Mac from https://www.asus.com/Networking/RP-AC55/HelpDesk_Download/.
Page 6
B. Set the TCP/IP settings to automatically obtain an IP address. 1. Click Start > Control Panel > Network and Internet > Network and Sharing Center > Manage network connections. 2. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties. 3.
Page 7
B. Set the TCP/IP settings to automatically obtain an IP address. > System Preferences > Network. 1. Click the Apple icon 2. Select Ethernet and select Using DHCP in the Configure field. 3. Click Apply when done. U14322_RP-AC55_QSG_V3.indb 8 2018/5/22 18:10:00...