Table of Contents
Advertisement
4
Using the Notebook PC
Inserting a PC Card (PCMCIA)
1. If there is a PC Card socket protector, remove it using the "Removing a PC Card" instructions
below.
2. Insert the PC card with the connector side first and label side up. Standard PC cards will be flush
with the Notebook PC when fully inserted.
3. Carefully connect any cables or adapters needed by the PC card. Usually connectors can only be
inserted in one orientation. Look for a sticker, icon, or marking on one side of the connector repre-
senting the top side.
Be sure the PC card is level
when inserting.
Removing a PC Card (PCMCIA)
To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.
1. Press in the toggle eject button and release.
The recessed spring loaded toggle button
will extend when pushed in and released.
52
2. Press the extended button again to eject the
PC Card. Carefully pull the ejected PC card
out of the socket.
Advertisement
Table of Contents
