Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita 9556HB
Summary of Contents for Makita 9556HB
- Page 1 INSTRUCTION MANUAL Angle Grinder 9556HB DOUBLE INSULATION Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: 9556HB Wheel diameter 100 mm Max. wheel thickness 6.4 mm Spindle thread M10 x 1.5 Rated speed (n) 11,000 min Overall length 276 mm Net weight 1.8 kg Safety class • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country. • Weight according to EPTA-Procedure 01/2003... -
Page 3: Grinder Safety Warnings
When operating a power tool outdoors, use an Maintain power tools. Check for misalignment extension cord suitable for outdoor use. Use of or binding of moving parts, breakage of parts a cord suitable for outdoor use reduces the risk of and any other condition that may affect the electric shock. - Page 4 installing an accessory, position yourself and Maintain a firm grip on the power tool and bystanders away from the plane of the rotating position your body and arm to allow you to accessory and run the power tool at maximum resist kickback forces.
- Page 5 Do not position your body in line with and Use the specified surface of the wheel to per- behind the rotating wheel. When the wheel, at form the grinding. the point of operation, is moving away from your Do not leave the tool running. Operate the tool body, the possible kickback may propel the spin- only when hand-held.
-
Page 6: Functional Description
FUNCTIONAL ASSEMBLY DESCRIPTION CAUTION: Always be sure that the tool is switched off and unplugged before carrying out CAUTION: Always be sure that the tool is any work on the tool. switched off and unplugged before adjusting or Installing side grip (handle) checking function on the tool. - Page 7 ► 1 . Wheel guard 2. Bearing box 3. Screw ► 1 . Lock nut wrench 2. Shaft lock To remove the wheel, follow the installation procedure Installing or removing depressed in reverse. center wheel or flap disc Installing or removing flex wheel Optional accessory Optional accessory WARNING:...
-
Page 8: Operation
Installing or removing abrasive disc CAUTION: Never switch on the tool when it is in contact with the workpiece, it may cause an Optional accessory injury to operator. CAUTION: Always wear safety goggles or a face shield during operation. CAUTION: After operation, always switch off the tool and wait until the wheel has come to a complete stop before putting the tool down. - Page 9 When installing the abrasive cut-off wheel: Operation with abrasive cut-off / diamond wheel Optional accessory WARNING: When using an abrasive cut-off / diamond wheel, be sure to use only the special wheel guard designed for use with cut-off wheels. (In some European countries, when using a diamond wheel, the ordinary guard can be used.
-
Page 10: Maintenance
The wire bevel brush can shatter during use To maintain product SAFETY and RELIABILITY, and guard helps to reduce chances of personal injury. repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ► 1 . Wire bevel brush Unplug tool and place it upside down allowing easy access to spindle. -
Page 11: Optional Accessories
These accessories or attachments are recommended for use with your Makita tool spec- ified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Side grip Wheel guard for depressed center grinding wheel / flap disc / wire bevel brush 85... - Page 12 Makita Corporation 885533-4 20160714 www.makita.com...