Table of Contents
Advertisement
Figure 71. Installing the GPU switch board
Next steps
1. Connect the GPU switch board power cable.
2.
Installing a GPU
on page 74
3. Connect the GPU signal cables to the switch board and the system board.
4. Follow the procedure listed in
Installing the custom GPU brackets on the replacement GPUs
Prerequisites
1. Follow the safety guidelines listed in
2. Keep the Phillips #1 and #2 screwdrivers ready.
3. Install the GPU brackets on the GPU removed from your system.
Steps
1. Align the screw holes on the front I/O bracket with the screw holes on the GPU.
2. Secure the I/O bracket to the GPU by using the screws.
3. Align the screw holes on the support bracket with the screw holes on the GPU.
4. Secure the support bracket to the GPU by using the screws.
After working inside your system
Safety instructions
PowerEdge C4140 installing and removing system components
on page 24.
on page 23.
71
Advertisement
Table of Contents
