Advertisement
Quick Links
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY,
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations
F
are adhered to when using this equipment.
WARNING! Always wear approved eye or face protection when operating the torch.
F
WARNING! Butane gas is extremely flammable, handle with care.
F
WARNING! Always point the torch away from the eyes and body when igniting and during operation.
F
WARNING! Ensure the Adjustment Knob is firmly closed and the flame completely extinguished
F
after use.
WARNING! Do not puncture the cannister or dispose of in a fire.
F
DO NOT use the torch in an area where paint fumes, solvents or flammable liquids pose a
%
potential hazard. Keep flammable material away from the torch when operating. Flammable waste,
such as wiping or cleaning rags, must be placed in a closed metal container and disposed of correctly.
DO NOT operate the torch when you are tired or under the influence of alcohol, drugs or intoxicating
&
medication.
DO NOT hold the workpiece by hand. Use clamps or a vice (not included) to secure the workpiece.
&
DO NOT operate the torch if any parts are damaged or missing as this may cause failure and/ or
&
possible personal injury.
DO NOT touch the workpiece close to the heated area as it will be very hot. Allow to cool.
&
DO NOT touch the flame guard during or immediately after use as it will be very hot. Allow to cool.
&
DO NOT leave the torch operating whilst unattended.
&
DO NOT use this torch for longer than one hour continuously.
&
DO NOT allow children to operate the torch.
&
When not in use store away from direct sunlight in a safe, dry, childproof area, where the temperature
!
will not exceed 40°C (104°F).
Familiarise yourself with application and limitations, as well as the specific potential hazards peculiar
!
to the torch.
When not in use ensure the gas supply is turned off.
!
Keep children and unauthorised persons away from the working area.
!
Remove ill fitting clothing. Remove ties, watches, rings, and other loose jewellery, and contain
!
and/or tie back long hair.
After use, allow the torch to cool before storing it.
!
2.
INTRODUCTION & SPECIFICATIONS
Piezoelectric ignition with ceramic burner
head for simple operation and long life.
1300°C burner flame adjustable from 12mm
to 35mm. Includes bench stand for hands
free operation. Standard fill gives approximately
1 hour continuous operation. Overall Height
155mm.
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
Instructions For:
ELECTRONIC MICRO SOLDERING TORCH
AK293
Model No:
Air Control Sleeve
Flame Guard
Ignition Pin
Stand Base
Fig.A
ON
Adjustment Knob
Ignition Button
Gas Tank
Filling Valve
AK293 - 2 - 110504
Advertisement
Related Manuals for Sealey AK293
Summary of Contents for Sealey AK293
- Page 1 ELECTRONIC MICRO SOLDERING TORCH AK293 Model No: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
- Page 2 Sole UK Distributor Sole UK Distributor Web address: www.sealey.co.uk Web address: www.sealey.co.uk Sealey Group, Sealey Group, 01284 703534 01284 703534 Bury St. Edmunds, Suffolk. E-mail: sales@sealey.co.uk Bury St. Edmunds, Suffolk. E-mail: sales@sealey.co.uk AK293 - 2 - 110504 AK293 - 2 - 110504...