hit counter script
Makita DTM52 Instruction Manual

Makita DTM52 Instruction Manual

Cordless multi tool
Hide thumbs Also See for DTM52:

Advertisement

INSTRUCTION MANUAL
Cordless Multi Tool
DTM52
Read before use.

Advertisement

Table of Contents
loading

Summary of Contents for Makita DTM52

  • Page 1 INSTRUCTION MANUAL Cordless Multi Tool DTM52 Read before use.
  • Page 2: Specifications

    SPECIFICATIONS Model: DTM52 Oscillation per minute 10,000 - 20,000 min Oscillation angle, left/right 1.8° (3.6° total) Overall length with BL1820B 305 mm with BL1860B 322 mm Net weight 1.7 - 2.0 kg Rated voltage D.C. 18 V • Due to our continuing program of research and development, the specifications herein are subject to change without notice.
  • Page 3: Ec Declaration Of Conformity

    The typical A-weighted noise level determined accord- WARNING: The vibration emission during ing to EN62841-1: actual use of the power tool can differ from the Work mode: Cutting with segmental saw blade declared value(s) depending on the ways in which Sound pressure level (L ) : 76 dB(A) the tool is used especially what kind of workpiece...
  • Page 4 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
  • Page 5 Battery tool use and care Make sure the application tool is not contact- ing the workpiece before the switch is turned Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire Keep hands away from moving parts.
  • Page 6 It will Avoid storing battery cartridge in a con- also void the Makita warranty for the Makita tool and tainer with other metal objects such as charger. nails, coins, etc.
  • Page 7: Functional Description

    Overload alert function FUNCTIONAL DESCRIPTION The overload alert function may work if the current rises sharply due to the operation such as applying too much CAUTION: Always be sure that the tool is pressure onto a workpiece. switched off and the battery cartridge is removed The overload alert function decline the speed of before adjusting or checking function on the tool.
  • Page 8: Electronic Function

    Adjusting the orbital stroke rate Electronic function The tool is equipped with the electronic functions for easy operation. Constant speed control The speed control function provides the constant orbital stroke rate regardless of load conditions. Soft start feature Soft start feature reduces starting reaction. Accidental re-start preventive function ►...
  • Page 9 Open the lock lever fully until it sounds a click. CAUTION: Always install the battery cartridge Remove the holder bolt. fully until the red indicator cannot be seen. If not, When the lock lever is fully opened, the position of the it may accidentally fall out of the tool, causing injury to lock lever is maintained even if you release your hand.
  • Page 10: Operation

    Return the lock lever to its original position. OPERATION Always make sure that the application tool is securely held in place. WARNING: Before starting the tool and during operation, keep your hand and face away from the application tool. CAUTION: Do not apply excessive load to the tool which may cause a motor lock and stop the tool.
  • Page 11: Maintenance

    To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. ► 1. Dust attachment 2. Latch 3. Notch Install the sanding pad and the holder bolt.
  • Page 12: Optional Accessories

    • HM seg saw blade CAUTION: These accessories or attachments • HM sanding plate are recommended for use with your Makita tool • Diamond seg sawblade specified in this manual. The use of any other • Sanding pad accessories or attachments might present a risk of •...

Table of Contents