Table of Contents
Advertisement
Managing Your Network
Configuring Network Settings
Warning
Network Settings are advanced settings. Nokia recommends that these
settings are not changed unless it is necessary and you are qualified to do
so. Changing network settings might result in losing the IP30 configuration.
If you change the network settings to incorrect values and are
unable to correct the error, reset the IP30 to its factory default
settings.
To reset the IP30 to its factory default settings, choose Setup >
Firmware > Factory Defaults.
Enabling and Disabling the DHCP Server
The IP30 operates as a DHCP (Dynamic Host Configuration
Protocol) server enabled by default. This allows the IP30 to
configure all the devices on your network automatically.
If you have another DHCP server configured in your network, you
must disable the DHCP server in your IP30. Nokia recommends
that you leave this setting enabled.
To enable or disable the DHCP server,
1. In the Navigation Bar, click Setup > My Network.
The My Network page appears.
Nokia IP30 User Guide
53
Advertisement
Table of Contents
