Advertisement
Quick Links
Issue:
1
Date:
29/04/04
Item
Part No
Description
1
AB932/01
Frame
2
AB932/02
O-Ring
3
AB932/03
Nozzle assembly
4
AB932/04
Fluid tip
5
AB932/05
Fixing nut
6
AB932/06
Fixing cap
7
AB932/07
Spacer
8
AB932/08
Needle guide assembly
12
AB932/12
Needle fixing screw
13
AB932/13
Fluid needle
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12
months from purchase date. proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and
promotions, call us on 01284 757525 and leave your full name and address including your postcode.
Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk.
01284 757500
01284 703534
P A R T S L I S T I N G F O R :
AIR BRUSH KIT
AB932/K
MODEL:
Item
Part No
Description
14
AB932/14
Tail cover
15
AB932/15
Trigger
16
AB932/16
Micro adjust screw
17
AB932/17
Valve assembly
22
AB932/22
Paint cup
23
AB932/23
Jar cover with nozzle
24
AB930/16
Jar, 22cc
25
AB930/17
Jar with cover, 60cc
26
AB930/19
Air hose, 5ft
27
AB931/31
Air hose adaptor, 1/4" BSP
email
9A>
sales@sealey.co.uk
www.sealey.co.uk
AB932/K - 1 - 29/04/04
Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according
to these instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH
CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP
INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
F
WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations
are adhered to when using tools.
!
Ensure that the air brush and accessories are in a clean, sound condition and good working order. Take
action for immediate repair or replacement of damaged parts. Use recommended parts only. The use of
unauthorised parts may be dangerous and will invalidate the warranty.
!
Ensure the air brush supply hose is not tangled, twisted or pinched.
%
DO NOT use air brush or accessories if damaged.
%
DO NOT operate air brush while under the influence of drugs, alcohol or intoxicating medication, or if fatigued.
&
DO NOT direct spray against yourself, other persons or animals, electrical equipment or the machine itself.
%
DO NOT use the air brush for a task it is not designed to perform.
!
Wear approved eye protection and a suitable respirator when painting. A full range of personal safety
equipment is available from your Sealey Dealer.
%
DO NOT allow smoking or open flame in the work area.
2.
INTRODUCTION
Air brush kit including the AB932 professional gun and a comprehensive set of accessories including knife set
and air brush holder. Supplied in carry-case. Ideal for the serious air brush artist, or professional artist.
CONTENTS: AB932 professional gun with one 22cc and one 60cc paint jar.
One 100cc container of cleaning fluid.
Air brush stand.
Four additional 22cc paint mixing/storage jars.
3.
ASSEMBLY
Note: Numbers in brackets refer to item numbers on the
parts diagram.
3.1. Fit the jar cover with nozzle (23), or the paint cup (22) into
the frame (1) as shown in fig.1.
3.2. Screw one end of the air hose (26) onto the air hose connection
of the air brush and the other end onto the air supply.
3.3. To use a propellant can (Sealey Part No: AB/P) a regulator
valve/cap (Sealey Part No: AB930/11) is required, see fig.1.
3.4. To use a compressor (Sealey Model No: AB900) use the air
hose adaptor to connect the air hose to the compressor, as
shown in fig.1.
4. OPERATING INSTRUCTIONS
Note: Numbers in brackets refer to item numbers on the parts diagram.
4.1. Mask the area which is NOT to be painted.
4.2. Ensure the object to be painted is free from dust and grease etc.
4.3. After mixing and thinning the paint, as instructed by the paint manufacturer, fill the paint jar or paint cup
just over half full.
Note: You can mix any colour combinations required for use with your air brush, but ONLY mix compatible paints,
i.e mix enamels with enamels, lacquers with lacquers and so on. Mix thoroughly, making sure that the
paint is free from lumps. It may be necessary to strain the paint first.
4.4. Turn the air ON and test your spray on old newspaper or other material to get the “feel” of your air brush.
Note: When using quick drying paints, it is advisable to clean or immerse the fluid end of the air brush in a
compatible solvent between sprays.
I N S T R U C T I O N S F O R :
AIR BRUSH KIT
AB932/K
MODEL:
Knife set.
Small pot of light grease.
Soft paint brush.
Fig.1.
Regulator valve/cap
Adaptor for compressor
AB932/K - 1 - 29/04/04
Advertisement
Related Manuals for Sealey Professional TOOLS AB932/K
Summary of Contents for Sealey Professional TOOLS AB932/K
- Page 1 MODEL: MODEL: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL Issue: REQUIREMENTS, WARNINGS AND CAUTIONS.
- Page 2 WARNING! The fluid needle has a long sharp point and great care should be exercised when handling it. 5.3.2. Unscrew the tail cover (14), unscrew the needle securing nut (8A) and carefully withdraw the needle and Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk. needle guide assembly (8).