Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
1.1.
GENERAL
It is important to ensure that the lamp is fully charged before initial use.
9
DO NOT turn the lamp on when it is being charged.
8
DO NOT shine directly into your, another person's or an animal's eyes.
8
DO NOT allow children to use the lamp.
8
DO NOT leave battery in a discharged state. Recharge battery immediately.
8
Recharge the battery at least once every six months of non-use.
9
There are no user serviceable components. DO NOT dismantle.
9
DO NOT pull the charger plug from the mains socket by the lead.
8
1.2.
BATTERY SAFETY
WARNING! To reduce the risk of burns or fire:
‰
DO NOT Attempt to open, disassemble, modify or service the battery pack.
8
DO NOT Crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT Expose to temperatures above 60°C (140°F).
8
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin, thoroughly wash with water. If it gets in your eyes, rinse thoroughly with cool
9
water and seek immediate medical attention.
2. INTRODUCTION
Slimline fold out inspection lamp for use in confined spaces with its slim 9mm thickness. Inspection arm can be rotated 180° and folded.
Features 1 COB LED, which produce up to 550 lumens and a 1W SMD LED on the end for use as a directional torch. Main light has two
different lighting modes High/Low (550lm/220lm) and the SMD spotlight which has one setting at 80lm. Suitable for hands-free operation with a
magnet and a hanging hook. Folds away, small and compact, suitable for keeping in your pocket. Powered by a 3.7V 2Ah rechargeable Li-ion
battery, which lasts up to 8 hours. Supplied with USB charging lead.
3. SPECIFICATION
Model No:................................................................. LED186
Battery: ..........................................................3.7V 2Ah Li-ion
Charging Time: ..................................................................3hr
IP Rating: ..........................................................................IP4
LED Qty: ....................................................... 1 COB + 1 LED
Lumen Output ............... Side(High/Low)/Top: (550/220)/80lm
Maximum Length: ...................................................... 270mm
Minimum Length: ....................................................... 155mm
Operating Time: .....................Side(High/Low)/Top: (2.5/4)/8hr
4. OPERATION
4.1.
CHARGING
4.1.1.
The battery fitted to this lamp is considered to be a consumable item and its ability to accept charge will reduce over time. We will
warranty it against mechanical and electrical defect for a period of one year, this does not cover fair wear and tear. If the
battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will
not replace the battery even if it is less than one year old.
4.1.2.
Connect the charger into the USB socket on the lamp. Plug in to power supply and turn on. The blue LEDs on the lamp will light as
the battery charges. When all LEDs are lit, the torch is fully charged.
4.1.3.
When the battery has fully charged (approx 3hrs) disconnect from mains supply.
NOTE:
The Lithium battery does not suffer from memory effect and once fully charged may be stored for up to six months without another
charge.
© Jack Sealey Limited
6W COB LED + 1W LED RECHARGEABLE SLIM
INSPECTION LAMP
LED186
MODEL NO:
OPERATION
Original Language Version
LED186
Issue 1
23/04/2020
Advertisement
Related Manuals for Sealey LED186
Summary of Contents for Sealey LED186
- Page 1 LED186 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations). Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.