Makita BTD040 Instruction Manual
Hide thumbs
Also See for BTD040:
- Instruction manual (17 pages) ,
- Instruction manual (45 pages) ,
- Instruction manual (25 pages)
Related Manuals for Makita BTD040
Summary of Contents for Makita BTD040
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver BTD040 BTD060 BTD080 001249 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
ENE033-1 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN Intended use Authorized Representative in Europe: The tool is intended for screw driving in wood, metal and Makita International Europe Ltd. plastic. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 For Model BTD040 8JD, ENGLAND... - Page 3 Do not abuse the cord. Never use the cord for before making any adjustments, changing carrying, pulling or unplugging the power tool. accessories, or storing power tools. Such Keep cord away from heat, oil, sharp edges or preventive safety measures reduce the risk of moving parts.
-
Page 4: Specific Safety Rules
29. Follow instruction lubricating container with other metal objects such as changing accessories. nails, coins, etc. 30. Keep handles dry, clean and free from oil and Do not expose battery cartridge to water grease. or rain. GEB012-2 A battery short can cause a large current flow, overheating, possible burns and SPECIFIC SAFETY RULES even a breakdown. -
Page 5: Checking The Remaining Battery Capacity
If the battery has not been used for a long time, or is CAUTION: needed refresh charging, the orange lamp begins to Always check the direction of rotation before flicker. Use Makita refreshing adapter to refresh the • operation. battery. -
Page 6: Operation
To install these types of bits, follow the procedure (1). B = 14 mm (Note) Makita bits are these types. the kind or size of the screw/bolt, the material of the To install these types of bits, follow the procedure (2). - Page 7 Standard bolt BTD040 High tensile bolt BTD060 (M10) (M8) (M8) (M6) (M6) Seconds Fastening time Seconds 005762 Fastening time 005765 High tensile bolt BTD040 Standard bolt BTD080 (M8) (M6) (M6) Seconds Fastening time 005763 Seconds Fastening time 008458 Standard bolt BTD060 (M10)
-
Page 8: Maintenance
Failure to use the correct size driver bit or socket any other maintenance or adjustment should be bit will cause a reduction in the fastening torque. performed by Makita Authorized Service Centers, Bolt always using Makita replacement parts. Even though the torque coefficient and the •... - Page 9 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Phillips bit • Socket bit • Bit piece •...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884334A223...