Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Makita XVJ03
Summary of Contents for Makita XVJ03
- Page 1 INSTRUCTION MANUAL Cordless Jig Saw XVJ03 014137...
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model XVJ03 Length of stroke 26 mm (1") Wood 135 mm (5-5/16") Max. cutting capacities Mild steel 10 mm (3/8") Aluminum 20 mm (25/32") Strokes per minute 0 - 2,600 /min Overall length 257 mm (10-1/8") Net weight 2.7 kg (5.9 lbs) - Page 3 13. Remove any adjusting key or wrench before 25. Use power tools only with specifically turning the power tool on. A wrench or a key left designated battery packs. Use of any other attached to a rotating part of the power tool may battery packs may create a risk of injury and fire.
- Page 4 Always switch off and wait for the blade to If electrolyte gets into your eyes, rinse them come to a complete stop before removing the out with clear water and seek medical blade from the workpiece. attention right away. It may result in loss of 12.
-
Page 5: Functional Description
Battery protection system FUNCTIONAL DESCRIPTION (Lithium-ion battery with star marking) CAUTION: 1. Star marking Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 1. -
Page 6: Electric Brake
For cutting mild steel, consistently fails to quickly stop after switch trigger stainless steel and plastics. Straight line release, have tool serviced at a Makita service center. cutting action For clean cuts in wood Lighting up the lamps and plywood. -
Page 7: Cover Plate
Cover plate 1. Blade clamp 2. Jig saw blade 1. Cover plate 3. Protrusions 2. Base 001910 Return the tool opener to its original position. 007503 After installing, always make sure that the blade is Use the cover plate when cutting decorative veneers, securely held in place by trying to pull it out. -
Page 8: Bevel Cutting
Bevel cutting 001922 Then connect a Makita vacuum cleaner to the dust 014141 nozzle. . CAUTION: Always be sure that the tool is switched off and the 1. Dust nozzle • battery cartridge is removed before tilting the base. 2. Hose for vacuum... -
Page 9: Metal Cutting
Loosen the bolt on the back of the base with the hex To trim edges or make dimensional adjustments, run the wrench and slide the base all the way back. Then tighten blade lightly along the cut edges. the bolt to secure the base. Metal cutting Cutouts Always use a suitable coolant (cutting oil) when cutting... -
Page 10: Maintenance
If you need any assistance for more details regarding Never use gasoline, benzine, thinner, alcohol or these accessories, ask your local Makita Service Center. • the like. Discoloration, deformation or cracks may Jig saw blades •...