Table of Contents
Advertisement
Quick Links
USER MANUAL
TABLE OF CONTENTS
FOR YOUR SAFETY -------------------------------------------------- 1
SAFETY PRECAUTIONS -------------------------------------- 2
SPECIAL NOTES ON LCD MONITORS ------------------- 3
BEFORE YOU OPERATE THE MONITOR --------------------- 3
FEATURES -------------------------------------------------------- 3
PACKING LIST --------------------------------------------------- 3
CONTROLS AND CONNECTORS ----------------------- 4-5
ADJUSTING THE VIEWING ANGLE -------------------- 5-6
OPERATING INSTRUCTIONS ------------------------------------- 7
GENERAL INSTRUCTIONS ---------------------------------- 8
HOW TO ADJUST A SETTING ------------------------------ 9
ADJUSTING THE PICTURE ------------------------------ 9-10
PLUG AND PLAY ----------------------------------------------- 11
TECHNICAL SUPPORT(FAQ) ------------------------------- 12-13
ERROR MESSAGE & POSSIBLE SOLUTION ------- 14
APPENDIX -------------------------------------------------------------- 15
SPECIFICATIONS ----------------------------------------- 15-16
FACTORY PRESET TIMING TABLE ---------------------- 17
CONNECTOR PIN ASSIGNMENT ------------------------- 17
LXB-L17C
English
Deutsch
Françai
Español
Italian
TCO'95
Advertisement
Table of Contents
Related Manuals for Lenovo LXB-L17C
Summary of Contents for Lenovo LXB-L17C
-
Page 1: Table Of Contents
LXB-L17C English USER MANUAL Deutsch TABLE OF CONTENTS Françai FOR YOUR SAFETY -------------------------------------------------- 1 Español SAFETY PRECAUTIONS -------------------------------------- 2 SPECIAL NOTES ON LCD MONITORS ------------------- 3 Italian BEFORE YOU OPERATE THE MONITOR --------------------- 3 FEATURES -------------------------------------------------------- 3 PACKING LIST --------------------------------------------------- 3 TCO’95... - Page 2 Before operating the monitor please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 3 PRECAUTIONS l Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. l Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance.
- Page 4 l To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 - 240V AC, Min. 3.5A. l The wall socket shall be installed near the equipment and shall be easily accessible.
-
Page 5: Special Notes On Lcd Monitors
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. -
Page 6: Controls And Connectors
POWER CORD Power Source: 1. Make sure the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.) 3. -
Page 7: Adjusting The Viewing Angle
Figure 1 Connecting Cables Signal Cable AC Power Cord ADJUSTING THE VIEWING ANGLE INSTALLATION INSTRUCTIONS • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference. •... -
Page 8: Operating Instructions
Figure 3 NOTES • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. • Careful attention is required not to catch your fingers or hands when you change the angle. OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. - Page 9 Figure 4 External Control Knob EXTERNAL CONTROLS / Brightness / Contrast 3. Power Key /Power Indicator 4. Auto Config / Exit 5. MENU/Enter FRONT PANEL CONTROL • Power /Power indicator: Press this button to switch ON/OFF of monitor’s power. And display the monitor’...
-
Page 10: How To Adjust A Setting
Adjust brightness or function adjustment. • Auto Config Key / EXIT: 1. When OSD menu is in active status, this knob will act as EXIT-KEY (EXIT OSD menu) 2. When OSD menu is in off status, press this knob over 1 seconds to be in Auto Adjustment function. -
Page 11: Adjusting The Picture
5. To exit and save the setting, press to the exit item and press MENU-key, or leave the monitor alone for 10 seconds. 6. When the OSD window is active, it shows the input signal timing. The "H" Stands f o r the horizontal frequency and "V" stands for the vertical frequency. -
Page 12: Plug And Play
4. LANGUAGE Muti-Language selecion. 5. OSD TIMER Choose OSD window display time. 6. COLOR TEMPERATURE 6.1 7800K/6500K ( COLOR TEMPERATURE) The color temperature for 7800K is x=0.296, y=0.311 and 6500K is x=0.313, y=0.329. It presents two different color sets on the screen. You can select 7800K or 6500K by pressing MENU Key. - Page 13 The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel. THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL.
-
Page 14: Technical Support(Faq)
TECHNICAL SUPPORT (FAQ) Problem & Question Possible Solution Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug &... - Page 15 Screen image is not centered or *Adjust pixel frequency (CLOCK) and sized properly. FOCUS or press hot-key (AUTO) Picture has color defects *Adjust RGB color or select color (white does not look white) temperature Poor brightness or contrast *When the brightness of the screen lowers after being used for a certain period and the function of the display is affected, send it to our authorized...
-
Page 16: Error Message & Possible Solution
ERROR MESSAGE & POSSIBLE SOLUTION CABLE NOT CONNECTED : Check that the signal-cable is properly connected , If the connector is loose, tighten the connector’s screws. Check the signal-cable’s connection pins for damage. INPUT NOT SUPPORT : Your computer has been set to unsuitable display mode ,Set the computer to display mode given in the following table. -
Page 17: Appendix
APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 43 cm(17.0") Pixel pitch 0.264mm( H ) x 0.264mm( V ) Viewable angle 140° (H) 120° (V) Response time 20 ms Video R,G,B Analog Interface Input Separate Sync. H/V TTL H-Frequency 30kHz –... - Page 18 • Switch Auto Adjust Key/EXIT • / Brightness • / Contrast • Power Key • MENU/ENTER • External Controls: Functions BRIGHTNESS & CONTRAST • ADJUST POSITION • VIDEO NOISE • LANGUAGE • OSD TIMER • COLOR TEMPERATURE • OSD POSITION •...
-
Page 19: Factory Preset Timing Table
FACTORY PRESET TIMING TABLE HORIZONTAL VERTICAL RESOLUTION STANDARD FREQUENCY FREQUENCY 640 × 480 31.469kHz 59.94Hz 640 × 480 37.861kHz 72.809Hz 640 × 480 37.50kHz 75Hz 800 × 600 35.156kHz 56.25Hz 800 × 600 37.879kHz 60Hz SVGA 800 × 600 48.077kHz 72.188Hz 800 ×...