Page 1 NEC Express Server Express5800 Series Express5800/R120e-2E EXP481A User’s Guide Model Number: R120e-2E: N8100-2135F/2136F/2137F N8100-2138F/2139F N8100-2140F/2141F Chapter 1 General Description Chapter 2 Preparations Chapter 3 Setup Chapter 4 Appendix 10.104.03-101.01 December 2013, 1st Edition © NEC Corporation 2013...
Page 2: Documents For This Product
Chapter 2: Useful Features The detail of system BIOS settings, RAID Configuration Utility, and EXPRESSBUILDER Chapter 3: Appendix Error messages and Windows Event Logs Other documents Provides the detail of NEC ESMPRO, Universal RAID Utility, and the other features. Express5800/R120e-2E User’s Guide...
Page 3: Table Of Contents
Front View (with the Front Bezel Removed) ..................36 Rear View ............................39 External View........................... 41 Internal View ............................ 42 Motherboard (MB)..........................44 Status Indicators ..........................45 4.7.1 POWER LED ( )......................45 4.7.2 STATUS LED ( )......................45 Express5800/R120e-2E User’s Guide...
Page 4 1.17.2 Removal .......................... 109 1.18 Use of Internal Hard Disk Drives in the RAID System ..............110 1.18.1 Connecting cables ......................111 1.18.2 Notes on configurating a RAID System ................116 1.19 Installing Top Cover ........................117 Express5800/R120e-2E User’s Guide...
Page 5 EXPRESSSCOPE ENGINE 3 Network configuration ..............156 EXPRESSBUILDER..........................158 Features of EXPRESSBUILDER ....................158 Usage of EXPRESSBUILDER ....................... 158 Installing Software Components........................ 159 Turning Off the Server..........................160 Chapter 4 Appendix ..............................161 Specifications ............................162 PCI Configuration............................166 Express5800/R120e-2E User’s Guide...
Page 6: Notations Used In This Document
Unless otherwise stated, hard disk drive (HDD) described in this document refer to the following. • Hard disk drive (HDD) • Solid state drive (SSD) Removable media Unless otherwise stated, removable media described in this document refer to the following. • USB flash drive • Flash FDD Express5800/R120e-2E User’s Guide...
Page 7: Abbreviations Of Operating Systems (Windows)
Windows Server 2008 Enterprise Includes 64-bit and 32-bit Editions unless otherwise stated. The following appears on EXPRESSBUILDER. • Windows Server 2008 64-bit Edition: Windows Server 2008 x64 • Windows Server 2008 32-bit Edition: Windows Server 2008 x86 Express5800/R120e-2E User’s Guide...
Page 8: Trademarks
Trademarks Trademarks EXPRESSSCOPE are registered trademarks of NEC Corporation. Microsoft, Windows, Windows Server, Windows Vista, and MS-DOS are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. Intel, Pentium, and Xeon are registered trademarks of Intel Corporation of the United States.
Page 9: License Agreement Notice
BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Express5800/R120e-2E User’s Guide...
Page 10: Regulatory Notices
The mark on the electrical and electronic products only applies to the current European Union Member States. Outside the European Union If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority and ask for the correct method of disposal. Express5800/R120e-2E User’s Guide...
Page 11 )– не превышает 0,1 % веса вещества или в концентрации до 1000 миллионных частей; полибромбифенолы (PBB) – не превышает 0,1 % веса вещества или в концентрации до 1000 миллионных частей; полибромдифеноловые эфиры (PBDE) – не превышает 0,1 % веса вещества или в концентрации до 1000 миллионных частей. Express5800/R120e-2E User’s Guide...
Page 12: Warnings And Additions To This Document
2. This document is subject to change at any time without notice. 3. Do not make copies or alter the document content without permission from NEC Corporation. 4. If you have any concerns, or discover errors or omissions in this document, contact your sales representative.
Page 13: Precautions For Use (Be Sure To Read)
Names and Functions of Parts in this document. Safety precautions Follow the instructions in this document for the safe use of the NEC Express server. This User’s Guide describes hazardous parts of the server, possible hazards, and how to avoid them. Server components with possible danger are indicated with a warning label placed on or around them (or, in some cases, by printing the warnings on the server).
Page 14: Symbols Used In This Document And On Warning Labels
Unplug the power cord of the server. be specifically identified. Make sure to Otherwise, an electric shock or fire may follow the instruction. be caused. Make sure equipment properly grounded. Otherwise, an electric shock or fire may be caused. Express5800/R120e-2E User’s Guide...
Page 15: Safety Notes
Reliable Earthing Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips). Express5800/R120e-2E User’s Guide...
Page 16: Multiple Power Sources
Multiple power sources CAUTION Disconnect all power supply cords before servicing. Rack mounted equipment marking – Slide/rail marking CAUTION Slide/rail mounted equipment is not to be used as a shelf or a work space. Express5800/R120e-2E User’s Guide...
Page 17: General
When such things accidentally enter the server, immediately turn off the power and disconnect the power plug from the outlet. Do not disassemble the server, and contact the store where you purchased the product or your maintenance service company. Express5800/R120e-2E User’s Guide...
Page 18: Power Supply And Power Cord Use
• Do not secure the power cord with staples or damaged power cord with a power cord of the equivalents same standard. For information on replacing the power cord, contact the store where you purchased the product or a maintenance service company) Express5800/R120e-2E User’s Guide...
Page 19: Installation, Relocation, Storage, And Connection
Do not get your fingers caught in the rails When mounting/removing the server onto/from the rack, be careful to avoid getting your fingers caught in the rails or cutting your fingers on the rails. Express5800/R120e-2E User’s Guide...
Page 20: Cleaning And Working With Internal Devices
Use only the specified interface cable. Use only interface cables provided by NEC and locate a proper device and connector before connecting a cable. Using an authorized cable or connecting a cable to an improper destination may cause a short circuit, resulting in a fire.
Page 21: During Operation
Keep your hands and hair away from the cooling fan at the rear of the server during operation. Failure to observe this warning may cause your hands or hair to catch in the fan, resulting in personal injury. Express5800/R120e-2E User’s Guide...
Page 22: Warning Labels
If no label is attached or printed on the server, or if there is a label coming off or stained, contact the store where you purchased the product. External view Ex. Express5800/R120e-2E (3.5-inch Drive Model) 243-203025-003-00 Express5800/R120e-2E User’s Guide...
Page 23: Handling Precautions (For Proper Operations)
Tape media: Approximately 1 day • For optional devices, we recommend you use our NEC products. Some memory or hard disk drives manufactured by other companies are supported for use with this server, however, you will be charged to repair failure or damage caused by use of such products even within warranty period.
Page 24: Handling Precautions (Anti-Static Measures)
− Optional devices contain electronic components sensitive to static electricity. Avoid failures caused by static electricity when installing or removing any optional devices. Express5800/R120e-2E User’s Guide...
Page 25 Keeping your equipment clean is important not only for the appearance but also for functional and safety reasons. A dusty monitor makes it difficult to see the display contents, so clean it regularly. Take rest breaks When you feel tired, take a break. Light exercise is also recommended. Express5800/R120e-2E User’s Guide...
Page 26: Chapter 1 General Description
Verify the condition of your server's accessories. 3. Standard Features Check and maintain the server system by using the functions explained in this section. 4. Names and Functions of Parts This section describes the name of each part contained in this server. Express5800/R120e-2E User’s Guide...
Page 27: Introduction
This high performance server is powered by the latest microprocessor "Intel Xeon processor. NEC’s latest technology and architectures realize high-power and high-speed operation that cannot be matched by existing servers. The server is designed with consideration of not only reliability but also expandability, which enables you to use it as a network server.
Page 28: Accessories
The chassis serial number plate and maintenance label is located on the server. If the serial number does not match the number on the warranty, you may not be guaranteed against failure even within the warranty period. Contact your sales representative if they do not match. Express5800/R120e-2E User’s Guide...
Page 29: Standard Features
The security lock that comes with the front bezel (Option of R120e-2E) Management Utilities • NEC ESMPRO • ExpressUpdate • Remote controlling feature (EXPRESSSCOPE Engine 3) • RAID system management utility (Universal RAID Utility) • Hard disk drive monitoring • Power monitoring feature Express5800/R120e-2E User’s Guide...
Page 30 El Torito Bootable CD-ROM (no emulation mode) format supported • Software power-off • Remote power-on feature • AC-Link feature • Remote console feature • Power switch mask • Connector for display unit provided on front panel • Baseboard Management Controller (BMC) conforming to IPMI v2.0 Express5800/R120e-2E User’s Guide...
Page 31 With N8154-46 2.5-inch HDD cage installed. 8 slots for 2.5-inch hard disk drive in standard configuration. With N8154-47 2.5-inch HDD cage (rear) installed. 24 slots for 2.5-inch hard disk drive bay in standard configuration. With N8154-47 2.5-inch HDD cage (rear) installed. 12 slots for 3.5-inch hard disk drive bay in standard configuration. Express5800/R120e-2E User’s Guide...
Page 32: Management Features
The hardware components of the server provide operation control/reliability features as shown below. Additionally, NEC ESMPRO Agent, which is provided in EXPRESSBUILDER, enables you to collectively manage the state of your systems. You can also monitor the server states from a PC to manage the network where NEC ESMPRO Manager provided in EXPRESSBUILDER is installed.
Page 33: Firmware And Software Version Management
3. Standard Features Firmware and Software Version Management Use of NEC ESMPRO Manager and ExpressUpdate Agent allows you to manage versions of firmware and software as well as update them by applying update packages. This function automatically updates multiple modules without stopping the system just by specifying the application of an update package from NEC ESMPRO Manager.
Page 34: Names And Functions Of Parts
Chapter 1 General Description 4. Names and Functions of Parts Names and Functions of Parts This section describes the names of the server parts. Front View (Front Bezel option: N8146-48F) Express5800/R120e-2E (16x 2.5-inch Drive Model) (3)-1 (3)-3 (3)-2 (3)-4 Front Bezel STATUS LED (green/amber) The cover to protect the front of the server.
Page 35 Chapter 1 General Description 4. Names and Functions of Parts Express5800/R120e-2E (26x 2.5-inch Drive Model) Express5800/R120e-2E (3.5-inch Drive Model) (3)-1 (3)-2 (3)-3 (3)-4 (1) Front Bezel (5) STATUS LED (green/amber) The cover to protect the front of the server. This cover can This LED indicates the server status.
Page 36: Front View (With The Front Bezel Removed)
Chapter 1 General Description 4. Names and Functions of Parts Front View (with the Front Bezel Removed) Express5800/R120e-2E (16x 2.5-inch Drive Model) See (3) to (5) on previous page. (10) (11) (12) (13) (14) (15) (16) (17) (9)-1 (9)-3 (9)-5 ((9)-7...
Page 37 Chapter 1 General Description 4. Names and Functions of Parts Express5800/R120e-2E (26x 2.5-inch Drive Model) See (3) to (5) on previous page. (14) (13) (11) (12) (10) (9)-0 (9)-2 (9)-4 (9)-6 (9)-8 (9)-10 (9)-12 (9)-14 (9)-16 (9)-18 (9)-20 (9)-22 (15)
Page 38 Chapter 1 General Description 4. Names and Functions of Parts Express5800/R120e-2E (3.5-inch Drive Model) See (3) to (5) on previous page. (14) (13) (11) (12) (15) (9)-0 (9)-3 (9)-6 (9)-9 (9)-1 (9)-4 (9)-7 (9)-10 (10) (9)-2 (9)-5 (9)-8 (9)-11 DISK LED (green/amber)
Page 39: Rear View
(13) (9) (11) (9) (11) (11) (9) (11) (11) (14) (15) (10)-4 (10)-3 (10)-2 (10)-1 (12) With N8154-47 2.5-inch HDD cage (rear) installed.* (16)-12/24 (16)-13/25 *: Express5800/R120e-2E (26x 2.5-inch Drive Model) and Express5800/R120e-2E (3.5-inch Drive Model) only. Express5800/R120e-2E User’s Guide...
Page 40 (10) LAN connectors numbers indicate the corresponding port numbers. 1000BASE-T/100BASE-TX/10BASE-T supported Ethernet connectors Express5800/R120e-2E (26x 2.5-inch Drive Model): Sequential numbers 1, 2, 3 and 4 indicate LAN connectors Port 24,25 1, 2, 3 and 4, respectively. Express5800/R120e-2E (3.5-inch Drive Model):...
Page 41: External View
Chapter 1 General Description 4. Names and Functions of Parts External View Express5800/R120e-2E (16x 2.5-inch Drive Model) Express5800/R120e-2E (26x 2.5-inch Drive Model) Express5800/R120e-2E (3.5-inch Drive Model) (1) Top Cover (front) (2) Release Button (3) Top Cover (rear) Express5800/R120e-2E User’s Guide...
Page 42: Internal View
Chapter 1 General Description 4. Names and Functions of Parts Internal View The image below does not show the processor duct. Ex. Express5800/R120e-2E (16x 2.5-inch Drive Model) (8)-1 FAN1F FAN1R FAN2F FAN2R (8)-2 FAN3F FAN3R (8)-3 FAN4F FAN4R FAN5F FAN5R...
Page 43 Chapter 1 General Description 4. Names and Functions of Parts Express5800/R120e-2E (26x 2.5-inch Drive Model) Express5800/R120e-2E (3.5-inch Drive Model) Ex. Express5800/R120e-2E (3.5-inch Drive Model) (6)-1 FAN1F FAN1R (6)-2 FAN2F FAN2R FAN3F FAN3R (6)-3 FAN4F FAN4R FAN6R FAN5F FAN5R FAN7R (9)-1...
Page 44: Motherboard (Mb)
Refer to Chapter 2 (1.13 PCI Card) for available card. (13) Lithium battery (27) FAN connector (Rear) (14) PSU connector -1 FAN6R -1 default (POW #1) -2 FAN7R -2 redundant (POW #2) (15) SATA Optical Disk Drive signal connector (16) SATA connector (17) Buzzer Express5800/R120e-2E User’s Guide...
Page 45: Status Indicators
While hardware is operating normally, STATUS LED lights green. STATUS LED is off or lights/flashes amber if there is a problem with hardware. The following table lists STATUS LED patterns, their explanation and solution. Tips You can reference error logs to check the causes of failures by using NEC ESMPRO. STATUS LED pattern Explanation Solution −...
Page 46: Link/Act Led ( 1, 2, 3, 4)
This indicates a hard disk drive is being accessed On (amber) This indicates a hard disk drive is failing. Flashing (green and amber This indicates that a hard disk drive is being rebuilt. alternately) Hard disk drive is halted. Express5800/R120e-2E User’s Guide...
Page 47: Optical Disk Access Led
• Do not turn off or reboot the server while a hard disk drive is being rebuilt. • Wait at least 90 seconds before installing a hard disk drive after removing one. • Do not replace a hard disk drive while another hard disk drive is being rebuilt. Express5800/R120e-2E User’s Guide...
Page 48: Leds For Lan Connectors
This LED indicates which network interface is used. The four LAN connectors for data transmission support 1000BASE-T, 100BASE-TX, and 10BASE-T. Management LAN port supports 100BASE-TX and 10BASE-T. SPEED LED pattern Explanation On (amber) Operating with 1000BASE-T On (green) Operating with 100BASE-TX Operating with 10BASE-T Express5800/R120e-2E User’s Guide...
Page 49: Ac Power Led On Power Supply Unit
Cold Redundant feature is enabled. On (amber) The power cable is not connected in Connect the power cable. redundant power configuration. Power supply unit is failing. Contact your sales representative. Flashing (amber) Power supply unit is failing. Express5800/R120e-2E User’s Guide...
Page 50: Chapter 2 Preparations
1. Installing Internal Optional Devices You can skip this section if you did not purchase any optional devices. 2. Installation and Connection You must place the server in an ideal location and connect some cables following this section. Express5800/R120e-2E User’s Guide...
Page 51: Installing Internal Optional Devices
• Use only the devices and cables specified by NEC. You will be charged to repair damages, malfunctions, and failures caused by the use of any devices or cables not specified for use with this server even within the warranty period.
Page 52: Anti-Static Measures
Connecting a charged cable with an I/O device may cause damage to the device. It is recommended to discharge static electricity before connecting a cable by using ionizer or the like. Consult with your sales representative for apparatus to discharge static electricity. Express5800/R120e-2E User’s Guide...
Page 53: Overview Of Installation And Removal
PCI card, additional HDD cage, additional HDD cage(rear), additional/redundant fan unit, optical disk drive Important Do not leave the server open on the rack. If you are going to install a hard disk drive only, go to step 10. Express5800/R120e-2E User’s Guide...
Page 54 12. Attach the front bezel. Refer to Chapter 2 (1.5 Removing the Front Bezel). This is the end of the installation or removal procedures for internal optional devices. Continue the setup with reference to Chapter 2 (2.2 Connection). Express5800/R120e-2E User’s Guide...
Page 55: Confirming Servers (Uid Switch)
UID switch first. If UID (Unit ID) switch is pressed, UID LED will be on or flash. If it is pressed again, the LED will be off. <Front View> Express5800/R120e-2E (16x 2.5-inch Drive Model) UID switch Express5800/R120e-2E (26x 2.5-inch Drive Model) UID switch Express5800/R120e-2E User’s Guide...
Page 56 Chapter 2 Preparations 1. Installing Internal Optional Devices Express5800/R120e-2E (3.5-inch Drive Model) UID switch <Rear View> UID switch Express5800/R120e-2E User’s Guide...
Page 57: Removing The Front Bezel
Insert the attached security key into the key slot and turn the key to the front bezel side while pressing it lightly to release the lock. Unlocked Locked 解除ロック Hold the both end of the front bezel carefully, pull it toward you, and remove it. Note Be careful not to press POWER Switch. Express5800/R120e-2E User’s Guide...
Page 58: Removing Top Cover
Lift off the top cover (front) from the server. Loosen the thumb nut on rear of the server, and slide the top cover (rear) to rear side. Express5800/R120e-2E User’s Guide...
Page 59 Chapter 2 Preparations 1. Installing Internal Optional Devices Lift the top cover (rear) and remove it. Express5800/R120e-2E User’s Guide...
Page 60: Internal Flash Memory
Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. Remove the duct. Attach the Internal Flash Memory and fix it with the screw provided with this product. 1.7.2 Removal To remove the Internal Flash Memory, reverse the installation procedure. Express5800/R120e-2E User’s Guide...
Page 61: Tpm Kit
The TPM Kit once installed cannot be removed. Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. Remove the duct. Install TPM Kit and secure it by pushing the nylon rivet provided with TPM Kit. Express5800/R120e-2E User’s Guide...
Page 62: Processor (Cpu)
• Do not operate the system until confirming that the additionally installed processor is in normal state. • Make sure to use the processor authorized by NEC. Installing a third-party processor may cause a failure of the processor as well as the motherboard. Repair of the server due to failures or damage resulted from installing such a processor will be charged.
Page 63: Installation
Push down the socket lever once to unlatch it from the hook, then slowly open the lever until it stops. Lift the plate. Important You will see the CPU socket contacts. Do not touch the socket contacts. Express5800/R120e-2E User’s Guide...
Page 64 • Insert the processor while aligning the notch on the processor with the key section on the Note CPU socket. • Bring down the processor straight without tilting or sliding it in the socket. Lightly push the processor to the CPU socket, and close the plate. Express5800/R120e-2E User’s Guide...
Page 65 Make sure that the screw aligns with the screw hole. If not, the screw may damage the motherboard. Note Make sure that the heat sink is properly attached and properly direction. 11. Make sure that the heat sink is installed on a level with the motherboard. The server back side The server front side Express5800/R120e-2E User’s Guide...
Page 66: Replacement / Removal
– All screws are not completely tightened. • Do not move the secured heat sink. Express5800/R120e-2E (16x 2.5 inch Drive Model) only 12. If the processor is additionally installed, you need to install the additional fan unit provided with additional processor.
Page 67: Dimm
1.10.2 Memory clock The server supports the memory clock speed of DDR3-800/1066/1333/1600MHz. However, the actual memory clock speed depends on CPU model and memory configuration. The memory clocks of all of buses operate at the same clock speed. Express5800/R120e-2E User’s Guide...
Page 68: Memory Ras Feature
Standard memory feature (x4 SDDC ECC memory) • Memory Mirroring feature (restrictions imposed on DIMM configuration) • Memory LockStep feature (x8 SDDC ECC memory) (restrictions imposed on DIMM configuration) • Rank Sparing feature (restrictions imposed on DIMM configuration) Express5800/R120e-2E User’s Guide...
Page 69: Dimm Installation Order
2-CPU 1-CPU 2-CPU 1-CPU 2-CPU DIMM number configuration configuration configuration configuration configuration configuration CPU1_DIMM1 CPU1_DIMM4 CPU1_DIMM2 CPU#1 CPU1_DIMM5 CPU1_DIMM3 CPU1_DIMM6 CPU2_DIMM1 CPU2_DIMM4 CPU2_DIMM2 CPU#2 CPU2_DIMM5 CPU2_DIMM3 CPU2_DIMM6 N/S: Not supported, the slot is unavailable for this feature. Express5800/R120e-2E User’s Guide...
Page 70: Installation
If using a Windows OS, refer to Chapter 1 (7.1 Specifying Memory Dump Settings (Debug Information)) in "Installation Guide (Windows)". For other OS, consult the manual provided with the operation system or contact the store where you purchased it or your maintenance service company. Express5800/R120e-2E User’s Guide...
Page 71: Replacement / Removal
Note When removing a defective DIMM, check error messages displayed at POST or NEC ESMPRO and check the DIMM socket where the defective DIMM is installed. Take the steps below after replacing or removing DIMMs. Confirm that no error messages are displayed on POST. If any error message is displayed, refer to Chapter 3 (1.
Page 72 Run SETUP again, and check if the status of additionally installed DIMMs shows "Mirror". • Installation order depends on CPU configuration. See the figure below. The mirroring cannot be configured in the following case: • Memory mirroring within a specific memory channel Express5800/R120e-2E User’s Guide...
Page 73 • LockStep between memory channels of different memory controllers (CPU) • LockStep within the same memory channel Notes on Configuring LockStep If you install or remove DIMMs that unable to configure Memory LockStep, parameter for [Memory RAS Mode] is changed from "LockStep" to "Independent". Express5800/R120e-2E User’s Guide...
Page 74 The following Memory sparing cannot be configured. • A DIMM of different capacity is installed. Notes on Configuring Memory Sparing If you install or remove DIMMs that unable to configure Memory Sparing, parameter for [Memory RAS Mode] is changed from "Spared" to "Independent". Express5800/R120e-2E User’s Guide...
Page 75: Extra Battery / Flash Backup Unit For Raid Controller
Remove the riser card from the slot in which you are going to install an extra battery. Refer to Chapter 2 (1.13 PCI Card). Connect the cable to the additional battery. When connecting the cable, orient the cable so that its marking will fit the connector. Remove the battery bracket from the duct. Battery bracket Express5800/R120e-2E User’s Guide...
Page 76: Removal
For how to install riser card, refer to Chapter 2 (1.13 PCI Card). 10. Attach the duct which extra battery is installed. 1.11.3 Removal For removing the extra battery for the RAID Controller, reverse the installation procedure. Express5800/R120e-2E User’s Guide...
Page 77: Installing Fbu
RAID Controller, to FBU. Remove the screw securing the riser card. Hold the both ends of the riser card and lift it off. Screws Note Be careful not to contact with other parts. Express5800/R120e-2E User’s Guide...
Page 78 FBU control cable connector and on RAID Controller connector. If the cable is connected conversely, the component might be damaged. Attach the RAID Controller to the rise card. For how to install RAID Controller, refer to Chapter 2 (1.13 PCI Card). Express5800/R120e-2E User’s Guide...
Page 79 For how to install riser card, refer to Chapter 2 (1.13 PCI Card). 10. Attach the duct which extra battery is installed. 1.11.5 Removal For removing the FBU for the RAID Controller, reverse the installation procedure. Express5800/R120e-2E User’s Guide...
Page 80: Backup File Device
Backup File Device The 16x 2.5-inch Drive Model has one slot for installing a backup file device such as a magnetic tape drive. Important Install only a backup file device specified by NEC. Backup file device bay 1.12.1 Installation (USB file devices) Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
Page 81 Connect the power cable and interface cable to the backup file device. Connect the power cable provided with the server and separately-priced USB cable (K410-194/195(00)) to the backup file device. Power cable USB cable Express5800/R120e-2E User’s Guide...
Page 82 Refer to the manual that comes with the backup file device. 1.12.2 Removal Remove the backup file device in reverse order of the installation steps. Important To maintain the cooling effect in the server, install the blank cover in the vacant slot. Express5800/R120e-2E User’s Guide...
Page 83: Pci Card
For a RAID Controller, LAN card (network boot), or Fibre Channel controller, if no hard disk drive on which an OS is installed is connected, set the option ROM for that slot to Disabled. Refer to Chapter 2 (1. System BIOS) in "Maintenance Guide" for how to specify it. Express5800/R120e-2E User’s Guide...
Page 84: Supported Cards And Available Slots
N8190-157 (16Gbps/Optical) [PCI Express 3.0 (x8)] − − Fibre Channel Controller N8190-158 (2ch)(16Gbps/Optical) [PCI Express 3.0 (x8)] − N8104-138 1000BASE-T Adapter For additional LAN port. (1ch) The card shape isPCI Express 2.0 (x4). [PCI Express 2.0 (x1)] Express5800/R120e-2E User’s Guide...
Page 85 <Example> x8 lane = 64 Gbps (one-way) *2 Connector size. Cards exceeding the number of sockets cannot be connected. <Example> x4 socket can connect with x1 and x4 cards, but not x8 card. *3 Use RS-232C cable (B). Express5800/R120e-2E User’s Guide...
Page 86 The card performance described in the parentheses after the Product name indicates the maximum operation performance of the card. When the operation performance of a PCI card is higher than the PCI slot on the server, the PCI card operates with the performance of the PCI slot on the server. Express5800/R120e-2E User’s Guide...
Page 87: Installation
Be careful not to contact with other parts. Confirm the installation position with the reference to the table in (1.13.2 Supported cards and available slots). Remove the screw, and remove RAID Screw Controller bracket from the rise card. RAID Controlller bracket Express5800/R120e-2E User’s Guide...
Page 88 • If you have trouble in installing the card, remove the card once and try again. If you apply excessive pressure on the card, a PCI card or riser card might break. Tips Connect a cable between connector on HDD backplane and RAID card before installing the riser card to the server. Express5800/R120e-2E User’s Guide...
Page 89 • When connecting a RAID Controller, set the boot priority to 8th or higher in the Boot menu of the BIOS Setup utility. If the setting is 9th or lower, the configuration menu for RAID Controllers cannot be launched. Express5800/R120e-2E User’s Guide...
Page 90 Important Do not touch the terminal part of riser cards or PCI cards and the signal pins of electric parts installed on the card. Installing cards with dirt or oil can cause malfunction. Express5800/R120e-2E User’s Guide...
Page 91 For details, refer to the manual that comes with optional RAID Controller (N8103-161). • You must avoid static electricity to work with the procedure below. For Important details, refer to Chapter 2 (1.2 Anti-static Measures). • Do not change the mode to hibernate when building a RAID System. Express5800/R120e-2E User’s Guide...
Page 92 If needed, run SETUP utility, and then specify the boot order from the Boot menu. For details about the Boot menu, refer to Chapter 2 (1. System BIOS) in "Maintenance Guide". If using the server while the card is removed, attach the slot cover that comes with the riser card. Express5800/R120e-2E User’s Guide...
Page 93: Additional Hdd Cage
Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. Remove the six screws from protective cover, and remove the protective cover. Remove the blank cover of 2.5-inch HDD cage bay by pulling it toward you. Note Keep the removed blank cover for future use. Express5800/R120e-2E User’s Guide...
Page 94 Mount HDD Cage and join the projection of the server (four places) to the hole on back of HDD Cage (four places). The projection of the server (four places) The hole on back of HDD Cage (four places) While pressing down on the HDD cage, move it toward the rear of the server to fix. Express5800/R120e-2E User’s Guide...
Page 95 Insert the edge of HDD Cage to edge of chassis carefully, as shown in the following figure. The edge of HDD Cage is not correctly inserted to The edge of HDD cage is correctly inserted to edge of chassis edge of chassis Express5800/R120e-2E User’s Guide...
Page 96 Secure the protective cover with six screws you have removed in Step 2. Disconnect SAS/SATA cable from the factory-installed HDD cage. Install expander board to Expansion Bay and secure it with five screws provided with additional HDD cage. Express5800/R120e-2E User’s Guide...
Page 97 10. Connect the SAS/SATA cable you removed in Step 7. (or provided with the server) to Expander Board. SAS/SATA cable factory-installed additional Backplane Backplane Board Board Expander Board RAID Controller SAS 1(Port 0-3 or Port 1-4 ) RAID Controller SAS 2(Port 4-7 or Port 5-8 ) Express5800/R120e-2E User’s Guide...
Page 98 12. Attach the ID label to the front face of chassis. 1.14.2 Removal To remove an additional HDD cage, reverse the installation procedure. Important To maintain the cooling effect in the server, install the blank cover in the vacant slot. Express5800/R120e-2E User’s Guide...
Page 99: Additional Hdd Cage (Rear)
Refer to steps 1 to 6 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. Remove the two screws and remove the blank cover from 2.5-inch HDD cage bay. Screws Note Keep the removed blank cover for future use. Express5800/R120e-2E User’s Guide...
Page 100 Install the cage to the server by fitting the lugs (two places on the server) in the holes (two places on the cage). Then fix them by the two screws removed by the Step 2. Screws Connect the Power cable, SGPIO cable and SAS/SATA cable provided with additional HDD cage. Express5800/R120e-2E (26x 2.5-inch Drive Model SAS_B HDD Backplane Board Expander Board...
Page 101 Chapter 2 Preparations 1. Installing Internal Optional Devices Express5800/R120e-2E(3.5-inch Drive Model) SAS_B SAS_A HDD Backplane Board Connect to MB (Additional HDD Cage (Rear) Power connector) SAS_A SAS/SATA cable SAS_B SGPIO cable Upside Power cable Downside HDD cage (rear) Install the two fan units to the fan cage.
Page 102 After putting the catches (two places on the bottom of the fan cage) into the notch cuts of the server, install the fan cage by adjusting the positioning pins to the positioning on the HDD cage. Positioning Notch Cuts Note Check that the fan cage is firmly fixed Express5800/R120e-2E User’s Guide...
Page 103 Connect the cables of the fan units to the sockets (FAN6R/FAN7R) on the motherboard. FAN6R FAN7R 1.15.2 Removal To remove an additional HDD cage (rear), reverse the installation procedure. Important To maintain the cooling effect in the server, install the blank cover in the vacant slot. Express5800/R120e-2E User’s Guide...
Page 104: Additional/Redundant Fan Unit
The server can work with redundant cooling fan system by adding an optional fan unit. The figure below shows the slot numbers assigned to the slots of standard cooling fans and optional cooling fans. Express5800/R120e-2E (16x 2.5-inch Drive Model) Standard FANs...
Page 105 Chapter 2 Preparations 1. Installing Internal Optional Devices Express5800/R120e-2E (26x 2.5-inch Drive Model) Express5800/R120e-2E (3.5-inch Drive Model) Ex. Express5800/R120e-2E (3.5-inch Drive Model) FAN1F FAN1R FAN2F FAN2R FAN3F FAN3R Redandunt FANs Standard FANs (Option) FAN4F FAN4R FAN5R FAN5F Front Rear Express5800/R120e-2E User’s Guide...
Page 106: Installation
In 1-CPU configuration: Install redundant fan units in slots FAN 1F to 3F, and 5F. In 2-CPU configuration: Install redundant fan units in slots FAN 1F to 5F. Insert the fan unit straight into the additional fan slot until it locks with clicking sound. Express5800/R120e-2E User’s Guide...
Page 107 Be sure to observe the following precautions to use the server safely. Failure to observe the precautions may cause burns, injury, and property damage. For details, refer to Safety precautions in Precautions for Use. • Pay attention to electric hazard. Express5800/R120e-2E User’s Guide...
Page 108: Optical Disk Drive
Remove a single screw from the cage, and remove Dummy cover the bracket and dummy cover. Bracket Important Keep the screw and dummy tray in the optical disk drive for future use. Install the optical disk drive to the cage. Express5800/R120e-2E User’s Guide...
Page 109 Connect the cable to optical disk drive. 1.17.2 Removal To remove an optical disk drive, reverse the installation procedure above. Important To maintain the cooling effect in the server, install the dummy cover in the vacant slot. Express5800/R120e-2E User’s Guide...
Page 110: Use Of Internal Hard Disk Drives In The Raid System
• When connecting a RAID Controller, set the boot priority to 8th or higher in the Boot menu of the BIOS Setup utility. If the setting is 9th or lower, the configuration menu for RAID Controllers cannot be launched. Tips When using SAS Hard Disk Drives, RAID Controller must be connected. Express5800/R120e-2E User’s Guide...
Page 111: Connecting Cables
16x 2.5-inch Drive Model: When using onboard RAID controller (1 to 4 drives) SAS/SATA Cable SGPIO Cable HDD Backplane Board MB (HDD Backplane Board Signal connector) MB (SATA Connector) MotherBoard HDD Backplane Board Hard Disk Drive Port 0 Port 1 SATA0_3 SAS0_3 Port 2 Port 3 Express5800/R120e-2E User’s Guide...
Page 112 HDD Backplane Board Hard Disk Drive RAID Controller Port 0 Port 1 SAS 1 SAS0_3 (Port 0-3 or Port1-4) Port 2 Port 3 Port 4 Port 5 SAS 2 SAS4_7 (Port 4-7 or Port5-8) Port 6 Port 7 Express5800/R120e-2E User’s Guide...
Page 113 Port 7 Port 8 HDD Backplane Port 9 SAS0_3H2 Board (2) SAS0_3 Port 10 SAS 2 Port 11 (Port 4-7 or SAS4_7R Port 5-8) Port 12 HDD Backplane Port 13 SAS4_7H2 Board (2) SAS4_7 Port 14 Port 15 Express5800/R120e-2E User’s Guide...
Page 114 (Ports 0 to 3 or Pors 1 to 4) Ports 0 to 23 SAS 2 SAS4_7 (Ports 4 to 7 or Porst 5 to 8) HDD Backplane Expander Board Hard Disk Drive Board (Rear) SAS_A SAS_A Port 24 SAS_B SAS_B Port 25 Express5800/R120e-2E User’s Guide...
Page 115 Porst 0 to 11 SAS 2 SAS4_7 (Ports 4 to 7 or Ports 5 to 8) HDD Backplane Board HDD Backplane Board (Rear) Hard Disk Drive SAS_A SAS_A Port 12 SAS_B SAS_B Port 13 SAS_C No Use SAS_D Express5800/R120e-2E User’s Guide...
Page 116 RAID Controller (N8103-172/173/174/168). • Do not change the RAID System mode to hibernate. Important • Build a Disk Array in the RAID System using Hard Disk Drives that have the same specifications (capacity, rotational speed, and standard). Express5800/R120e-2E User’s Guide...
Page 117: Installing Top Cover
Put the top cover (front) straight on the server chassis so that it can be surely engaged with the chassis frame. Slide the top cover (front) toward the rear of the server, until it is locked with clicking sound. Express5800/R120e-2E User’s Guide...
Page 118: Inch Hard Disk Drive
Important Use hard disk drives specified by NEC. Installing a third-party hard disk drive might cause a failure of the server and it. Note the following precautions to install hard disk drives.
Page 119 Chapter 2 Preparations 1. Installing Internal Optional Devices Express5800/R120e-2E (26x 2.5-inch Drive Model) (Front view) (From Left) Ports 0 to 23 Express5800/R120e-2E (26x 2.5-inch Drive Model) (Rear View) When additional HDD cage (rear) added Port 24 Port 25 Express5800/R120e-2E (3.5-inch Drive Model) (Rear View)
Page 120: Installation
• Keep the dummy trays for future use. Important • Dummy trays are intended to increase the cooling effect inside the server. Keep the dummy trays installed in slots where Hard Disk Drives are not installed. Unlock the handle of the drive carrier. Express5800/R120e-2E User’s Guide...
Page 121 Turn on the server, run BIOS SETUP utility, and then specify the boot order from the Boot menu. For details about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide". This process is required because the saved boot order is cleared when you add a Hard Disk Drive. Express5800/R120e-2E User’s Guide...
Page 122: Removal
If you transfer or dispose of the removed hard disk drive, refer to Chapter 1 (1. Transfer, Movement, and Disposal) in “Maintenance Guide” to erase data. Important NEC assumes no liability for data leakage should the product be transferred to a third party without erasing the data. Note If you have to remove a disk due to a hard disk drive failure, check the slot with its DISK LED lit in amber.
Page 123: Replacing A Hard Disk Drive In The Raid System
Leave an interval of at least 90 seconds between a Hard Disk Drive removal and a Hard Disk Drive installation. • Do not replace a disk during the auto rebuilding of another Hard Disk Drive (during an auto rebuild, the DISK LED on the Hard Disk Drive flashes green and amber alternately). Express5800/R120e-2E User’s Guide...
Page 124: Inch Hard Disk Drive
Important Use hard disk drives specified by NEC. Installing a third-party hard disk drive might cause a failure of the server and it. Note the following precautions to install hard disk drives.
Page 125: Installation
Install a Hard Disk Drive by using the following procedure. Follow the same installation procedure for other slots. Note Use hard disk drives specified by NEC. Installing a third-party hard disk drive might cause a failure of the server and it. Refer to Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
Page 126 Turn on the server, run SETUP utility, and then specify the boot order from the Boot menu. For details about the Boot menu, refer to Chapter 2 (1.2.5 Boot) in "Maintenance Guide". Tips The saved boot order is cleared when a hard disk drive is added. Express5800/R120e-2E User’s Guide...
Page 127: Removal
If you transfer or dispose of the removed hard disk drive, refer to Chapter 1 (1. Transfer, Movement, and Disposal) in “Maintenance Guide” to erase data. Important NEC assumes no liability for data leakage should the product be transferred to a third party without erasing the data. Note If you have to remove a disk due to a hard disk drive failure, check the slot with its DISK LED lit in amber.
Page 128: Power Supply Unit
Refer to Chapter 2 (1. System BIOS) in "Maintenance Guide", change parameters as shown below, save the settings and exit from SETUP. Server → Power Control Configuration → Cold Redundant Mode → Enabled Run SETUP again, and check if the status of Cold Redundant Mode shows Enabled in Server menu. Express5800/R120e-2E User’s Guide...
Page 129: Installation
Refer to steps 1 to 4 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations. Remove the blank cover. Important Keep the removed blank cover for future use. Insert the power supply unit.until it is locked with clicking sound. Express5800/R120e-2E User’s Guide...
Page 130 Refer to Chapter 2 (5. Troubleshooting) of the Maintenance Guide for details on the error messages. If the AC POWER LEDs are off, reinstall the power supply units. If the same error message still appears, contact your service representative. Express5800/R120e-2E User’s Guide...
Page 131 To maintain the cooling effect in the server, install the blank cover in the vacant slot. Install the new power supply unit taking steps 3 to 7 of "Installation", and confirm that the power supply unit is installed normally. Express5800/R120e-2E User’s Guide...
Page 132: Installing Front Bezel
1. Installing Internal Optional Devices 1.23 Installing Front Bezel When installing Front Bezel, engage catches of front bezel with those on mounting ear. After installing Front Bezel, lock it with Bezel Lock Key. Important Be careful not to press POWER Switch. Express5800/R120e-2E User’s Guide...
Page 133: Installation And Connection
• Do not leave more than one device being pulled out from the rack. • Do not provide the wiring for the server to exceed the rating of the power supply. • Do not use in the environment where corrosive gas is generated. Express5800/R120e-2E User’s Guide...
Page 134 If you must install the server close to such equipment, have your maintenance service company separate power cables or install noise filter. • Environment where operation of the server is not guaranteed Express5800/R120e-2E User’s Guide...
Page 135: Installing The Server To The Rack Or Removing It From The Rack
Review airflow in the rack and room and take sufficient measures so that the internal temperature will not exceed the operational temperature during operation. Air enters the server from the front and exits from the rear. Express5800/R120e-2E User’s Guide...
Page 136 Chapter 2 Preparations 2. Installation and Connection Installation This server can be mounted to a rack made by NEC or other companies. Mount the server to a rack in the following procedure. Preparation for mounting • Checking rails • Installing inner and outer rails Important Rail for left side has different shape from that for right side.
Page 137 • Do not attempt to lift the server with a single person. • Do not drop. • Do not leave the server being pulled out. • Do not install with the cover removed. • Do not get your fingers caught. Express5800/R120e-2E User’s Guide...
Page 138 When the server is pushed into the rack and is locked, push the server to the end while pulling the release levers (blue) on both sides of the server. Push the server until its lock on front panel Release lever clicks. Express5800/R120e-2E User’s Guide...
Page 139 • Do not apply pressure on the server from top when it is being pulled out. Doing so cause the server to drop, which is dangerous. • Be careful not to get your finger caught in rails. Express5800/R120e-2E User’s Guide...
Page 140 Push the unlock lever on outer rail to the direction shown by arrow to house the slide rail. Unlock lever Locking mechanism While pressing the lever on outer rail, push the outer rail toward inside of the rack, then remove it. Front View Rear view Express5800/R120e-2E User’s Guide...
Page 141: Connection
• Insert the power plug into the outlet as far as it goes. • Use only the specified power cord • Do not connect or disconnect the interface cable with the power plugged in the outlet. • Use only the specified interface cable Express5800/R120e-2E User’s Guide...
Page 142 Chapter 2 Preparations 2. Installation and Connection Display unit*1 (1) Front View USB device 16x 2.5-inch Drive Model *1 Either one can be connected. USB device 26x 2.5-inch Drive Model USB device 3.5-inch Drive Model Express5800/R120e-2E User’s Guide...
Page 143 *2 Connect the power cord to circuit breaker of up to 15 A. Note If you connect a card to a line, use the card which you have applied for with the certification authority. Tips A leased line cannot be directly connected to the serial port connector. Express5800/R120e-2E User’s Guide...
Page 144 If you connect an external USB DVD-ROM drive to a USB connector at the front of the server, do not connect any other device to the adjacent USB port. See the figure below. 26x 2.5-inch Drive Model, 16x 2.5-inch Drive Model 3.5-inch Drive Model Express5800/R120e-2E User’s Guide...
Page 145: Connecting To A Uninterruptible Power Supply (Ups)
To change the settings, select Server and then AC-LINK in the BIOS setup utility, and change the displayed parameters. Select Power On to perform automatic operations by using the UPS. For details, refer to Chapter 2 (1.2.4 Server) in "Maintenance Guide". Express5800/R120e-2E User’s Guide...
Page 146: Chapter 3 Setup
EXPRESSBUILDER helps you to install Windows and maintain the server. 5. Installing Software Components You can install Windows and bundled software by following the instructions in "Installation Guide (Windows)". 6. Turning off the Server Turn off power when not using the server. Express5800/R120e-2E User’s Guide...
Page 147: Turning On The Server
Press the POWER switch at the front of the server. The POWER LED is turned on green and after a while, the logo appears on the display. Important Do not connect or disconnect USB device while POST is running. Express5800/R120e-2E (16x 2.5-inch Drive Model) POWER switch Express5800/R120e-2E User’s Guide...
Page 148 Chapter 3 Setup 1. Turning on the Server Express5800/R120e-2E (26x 2.5-inch Drive Model) POWER switch Express5800/R120e-2E (3.5-inch Drive Model) POWER switch While the logo is being displayed, the self-diagnostic program (POST) runs and diagnoses the hardware. For details, refer to Chapter 3 (1.1.1 POST sequence).
Page 149: Post
Turn on the server. POST starts running and the initialization message indicating that modules such as the memory and PCI device are being initialized is displayed. Following the initialization message, the NEC logo is displayed. • Keyboard becomes operable after the logo appears. Note •...
Page 150: Post Error Messages
Chapter 3 (1. POST Error Message) in "Maintenance Guide". Important Take notes on the messages displayed before consulting with your maintenance service company. Alarm messages are useful information for maintenance. Express5800/R120e-2E User’s Guide...
Page 151: System Bios Setup
If you press the <F2> key at this time, SETUP runs and displays the Main menu upon completion of POST. (You can also press the <F2> key while the NEC logo appears to display the Main menu.) Express5800/R120e-2E User’s Guide...
Page 152 To exit SETUP without saving parameters, select Save & Exit → Discard Changes and Exit. To restore the default value, select Save & Exit → Load Setup Defaults. Important (The default value might be different from the factory setting.) Express5800/R120e-2E User’s Guide...
Page 153: Description On On-Screen Items And Key Usage
Quit without saving? [Yes] <F1> key Press this key to display help information. If you need help using the SETUP, press this key. Press the <Esc> key to go back to the original screen. Express5800/R120e-2E User’s Guide...
Page 154 (This might be different from the parameters configured before shipment.) Load Setup Defaults? [Yes] <F4> key If you press this key, the following window appears. If you select Yes, the parameter you configured is saved and SETUP closes. Save configuration and exit? [Yes] Express5800/R120e-2E User’s Guide...
Page 155: Cases That Require Configuration
If it is turned off by using → AC-LINK → Last State POWER switch, leave it OFF even when UPS supplies power. Server → Power Control Configuration Keep the power OFF even → AC-LINK → Stay off when UPS supplies power. Express5800/R120e-2E User’s Guide...
Page 156: Expressscope Engine 3
If you press the <F4> key at this time, ROM utility starts upon completion of POST. You can also press the <F4> key while the NEC logo is being displayed to open the Off-line TOOL MENU screen. The keyboard selection screen appears. Select your keyboard type.
Page 157 Connect the LAN cable to the management LAN connector in order to connect to the network. It will be available for use if you access EXPRESSSCOPE Engine 3 via Web browser from PC for management according to the setting. Express5800/R120e-2E User’s Guide...
Page 158: Expressbuilder
To use this feature, choose OS (Windows reinstallation) installation in the menu after boot. Bundled software* Stores various bundled software, such as NEC ESMPRO Agent. Maintenance Diagnoses your server system. To use this feature, choose Tool menu in Boot Selection Menu.
Page 159: Installing Software Components
Chapter 3 Setup 5. Installing Software Components Installing Software Components Continue to install software components such as OS. Refer to the instructions below. • Installation Guide (Windows) Express5800/R120e-2E User’s Guide...
Page 160: Turning Off The Server
Shut down the OS. The server automatically turns off after the OS shuts down. Confirm that POWER LED is OFF. Turn off peripheral devices. Tips Hibernate function of Windows Server cannot be used. Do not set Hibernate at Windows shutdown. Express5800/R120e-2E User’s Guide...
Page 161: Chapter 4 Appendix
NEC Express5800 Series Express5800/R120e-2E Appendix Specifications PCI Configuration Express5800/R120e-2E User’s Guide...
Page 162: Specifications
Environmental requirements Humidity Operating: 20 to 80%, Storage: 20 to 80% (No condensation either when operating or when stored) EXPRESSBUILDER (NEC ESMPRO Manager (Windows), NEC ESMPRO Agent, User's Guide (electronic document) Main accessories included), Getting Started, Notes on Use, one-touch rack rail...
Page 163 Prepare this if required. For the principal uses of a Flash FDD, refer to the notes on Flash FDD in the Maintenance Guide. Minimum configuration is 1x CPU, 1x DIMM, 1x HDD, 1x power supply. Up to two RAID Battery Backup Units can be installed if the server might be used at 40°C. Express5800/R120e-2E User’s Guide...
Page 164 Operating: 20 to 80%, Storage: 20 to 80% Environmental requirements Humidity (No condensation either when operating or when stored) EXPRESSBUILDER (NEC ESMPRO Manager (Windows), NEC ESMPRO Agent, User's Guide (electronic document) Main accessories included), Getting Started, Notes on Use, one-touch rack rail...
Page 165 Prepare this if required. For the principal uses of a Flash FDD, refer to the notes on Flash FDD in the Maintenance Guide. Minimum configuration is 1x CPU, 1x DIMM, 1x HDD, 1x power supply. Up to two RAID Battery Backup Units can be installed if the server might be used at 40°C. Express5800/R120e-2E User’s Guide...
Page 166: Pci Configuration
Onboard VGA controller PCI board installed in slot PCI1C PCI board installed in slot PCI2C Onboard LAN Correspondence between device numbers and function numbers of onboard LAN is as shown below: Device number Function number Onboard LAN (Device#) (Function#) Express5800/R120e-2E User’s Guide...
Page 167 PCI1B: INTB − 20(14h) 44(2Ch) PCI2B: INTD PCI3B: INTC PCI1B: INTC − 21(15h) 45(2Dh) PCI2B: INTB PCI3B: INTB EHCI#2 (USB) PCI1B: INTD 22(16h) 46(2Eh) PCI2B: INTC PCI3B: INTD − EHCI#1 (USB) 23(17h) 47(2Fh) ( ): Hexadecimal notation Express5800/R120e-2E User’s Guide...
Page 168 Indication on Properties page PCI slot Windows Server 2008 Windows Server 2008 R2 Windows Server 2012 PCI1A PCI Slot 1 PCI1B PCI Slot 2 PCI2B PCI Slot 3 PCI3B PCI Slot 4 PCI1C PCI Slot 5 PCI2C PCI Slot 6 Express5800/R120e-2E User’s Guide...

This manual is also suitable for:

N8100-2135f N8100-2136f N8100-2137f N8100-2140f N8100-2141f N8100-2138f ... Show all

NEC Express5800/R120e-2E User Manual

Chapter 1 General Description

Introduction

Accessories

Standard Features

Names and Functions of Parts

Chapter 2 Preparations

Installing Internal Optional Devices

Installation and Connection

Chapter 3 Setup

Turning on the Server

System BIOS Setup

Expressscope Engine 3

Expressbuilder

Installing Software Components

Turning off the Server

Chapter 4 Appendix

Specifications

PCI Configuration

Quick Links

Related Manuals for NEC Express5800/R120e-2E

Summary of Contents for NEC Express5800/R120e-2E

This manual is also suitable for:

Table of Contents