Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
Wear eye
Read the manual
protection.
1. SAFETY
1.1.
GENERAL SAFETY
WARNING! The mower must only be serviced by an authorised agent (except for blade replacement).
WARNING! Petrol is highly flammable and petrol vapour is explosive. DO NOT smoke, expose to naked flames, sparks or heat
while re-fuelling. Comply with all laws regulating handling and storage.
WARNING! DO NOT use in confined spaces, due to exhaust fumes.
7
DO NOT use this product to perform a task for which it has not been designed. Grassed lawns only.
7
DO NOT operate the mower barefoot or wearing open sandles, always wear substantial footwear and long trousers.
7
DO NOT operate the mower whilst tired, ill, under the influence of alcohol or other intoxicating drugs.
7
DO NOT carry the mower by the throttle cable or the recoil pull cord.
7
DO NOT start the mower with blades fully exposed.
7
DO NOT put your hands or feet under the cutter deck
3
Familiarise yourself with the controls and limitations of the mower. This is a portable petrol powered appliance, read the separate engine
manual, learn how to stop the engine quickly.
3
Ensure the mower is in good order and condition before use. If in any doubt mechanically DO NOT use the unit and contact a
service agent.
3
Maintain the mower in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be
dangerous and will invalidate your warranty.
3
Inspect the lawn prior to cutting, removing obstructions including molehills.
3
Keep children and unauthorised persons away from the working area.
3
Wear safety glasses, ear defenders and in dusty conditions a face mask.
3
Mow only in daylight or good artificial light.
3
Avoid mowing when grass is wet, never when raining.
3
Extra care is required when mowing slopes, be sure of your footing.
3
Turn off the mower, wait for the blade to stop before attempting any other mower activities.
2. INTRODUCTION
Self-propelled, sturdy wheeled lawnmower, built for the professional. Powered by a recoil started Briggs & Stratton 500E engine incorporating the
latest engine design technology and providing 'best in class' performance in this category of engines. Heavy-duty steel deck giving rigidity and
strength with 460mm (18") cutting width. Sturdy 250mm rear wheels and 175mm front wheels allow great manoeuvrability. 8 Position, single lever,
central cut adjustment with a range of 25-75mm. Emergency engine safety cut-out lever on an adjustable soft grip handle. Features a three-in-one
system for collection into a 60ltr collector, mulching, side or rear discharge. Fold down handle allows for easy storage and transportation.
3. SPECIFICATION
Model No: ................................................................................. GL112
Drive Type: .................................................................... Self Propelled
Cutting Width: .................................................................. 460mm (18")
Deck Construction: ................................................Mild Steel (painted)
Engine type:.................... Single Cylinder, 4 Stroke, Air Cooled, OHV
Engine Displacement: ................................................................ 140cc
Engine Cut-Out Lever:....................................................................Yes
Engine Power: ............................................................................3.0kW
Sound Pressure: ......................................................................86dB(A)
Sound Pressure Uncertainty: ....................................................3dB(A)
Sound Power: ..........................................................................98dB(A)
Sound Power Uncertainty:.........................................................3dB(A)
Fuel Tank Capacity: ......................................................................0.8ltr
Fuel Type: .................................................................Unleaded 95 Ron
Cutting Level Heights: ........................................................................8
Cutting Height Range: ........................................................ 25 - 75mm
Replacement Blades: .............................................................GL112.B
Weight: ...................................................................................... 33.5kg
Discharge: ....................................................................... Rear or Side
Mulching: ........................................................................................Yes
Rated Engine Speed: .............................................................2600rpm
Replacement Blade: ............................................................. GL112.01
© Jack Sealey Limited
INSTRUCTIONS FOR:
LAWN MOWER 460mm SELF PROPELLED
3 IN 1 PETROL B & S 500E
MODEL No:
Wear ear
protection.
Original Language Version
GL112
Operator present lever
Clutch lever (drive)
9
8
7
5
Throttle
1
2
4
6
fig.1.
GL112
Issue No: 1 -15/04/15
3
Advertisement
Related Manuals for Sealey GL112
Summary of Contents for Sealey GL112
- Page 1 GL112 MODEL No: Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Attach grass box if required (item 6) with the grass box slots. Lift the spring loaded hinged panel and locate slots with tabs, see fig.4. NOTE: The blade must be fitted observing the stamped arrow, fig.6. The retaining bolt has a standard RH thread. WARNING! Never use blades other than the spares supplied by your Sealey Dealer. fig.3.
- Page 3 Symbols and meanings are listed below. These meanings also add emphasis to the safety regulations and safety information given in earlier sections of these instructions. Some warnings in the instructions may appear more than once. Original Language Version © Jack Sealey Limited GL112 Issue No: 1 -15/04/15...
- Page 4 Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500. NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.