• The product-specific section includes service, reference, and product-specific parts information. Important: This manual is intended only for trained servicers who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. Before servicing a Lenovo product, make sure to read all the information under “Safety information” on page 1 and “Important service information” on page 16.
Safety information Safety information This chapter presents the following safety information that you need to get familiar with before you service a Lenovo ideapad 720S-15IKB/ Lenovo ideapad 720S Touch-15IKB computer: • “General safety” on page 2 • “Electrical safety” on page 3 • “Safety inspection guide” on page 5 • “Handling devices that are sensitive to electrostatic discharge” on page 6 • “Grounding requirements” on page 6 • “Safety notices: multilingual translations” on page 7 • “Laser compliance statement” on page 14...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual General safety Follow these rules below to ensure general safety: • Observe a good housekeeping in the area where the machines are put during and after the maintenance. • When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet. 3. Use a slow lifting force. Never move suddenly or twist when you attempt to lift it. 4. Lift it by standing or pushing up with your leg muscles; this action could avoid the strain from the muscles in your back. Do not attempt to lift any object that weighs more than 16 kg (35 lb) or that you think is too heavy for you.
Safety information Electrical safety Observe the following rules when working on electrical equipments. Important: Use only approved tools and test equipments. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have rubber floor mats near their machines that contain small conductive fibers to decrease electrostatic discharges.
Page 8
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual • Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. • Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury and machine damage. • Do not service the following parts with the power on when they are removed from their normal operating places in a machine: – Power supply units – Pumps – Blowers and fans – Motor generators and similar units. (This practice ensures correct grounding of the units.)
The power cord should be the type specified in the parts list. c. Insulation must not be frayed or worn. 4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 8. Check for worn, frayed, or pinched cables.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electrostatic discharge (ESD). ESD damage can occur when there is a difference in charge between objects. Protect against ESD damage by equalizing the charge so that the machine, the part, the work mat, and the person handling the part are all at the same charge. Notes: 1. Use product-specific ESD procedures when they exceed the requirements noted here.
Safety information Safety notices: multilingual translations The safety notices in this section are provided in English, French, German, Hebrew, Italian, Japanese, and Spanish. Safety notice 1 Before the computer is powered on after FRU replacement, make sure all screws, springs, and other small parts are in place and are not left loose inside the computer.
Page 12
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Safety notice 2 DANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery, recharge it, throw it into fire or water, or short- circuit it.
Page 13
Safety information Safety notice 3 DANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Page 14
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Safety notice 4 DANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water.
Page 15
Safety information Safety notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water at least for 15 minutes. Seek medical care if any symptoms caused by the fluid are present after washing. Si le panneau d’affichage à...
Page 16
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Safety notice 6 DANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
Page 17
Safety information Safety notice 8 DANGER Before removing any FRU, turn off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables. Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension, débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la batterie et déconnectez tous les cordons d’interface.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Laser compliance statement Some models of Lenovo computer are equipped from the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.S. to conform to the requirements of the Department of Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR) Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to...
Page 19
Safety information A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: DANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Strategy for replacing FRUs Before replacing parts: Make sure that all software fixes, drivers, and BIOS downloads are installed before replacing any FRUs listed in this manual. After a system board is replaced, ensure that the latest BIOS is loaded to the system board before completing the service action. To download software fixes, drivers, and BIOS, follow the steps below: 1. Go to http://support.lenovo.com. 2. Enter the serial number or select a product or use Lenovo smart downloading. 3. Select the BIOS/Driver/Applications and download. 4. Follow the directions on the screen and install the necessary software.
Important service information Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs: • If you are instructed to replace an FRU, but the replacement does not solve the problem, reinstall the original FRU before you continue. • Some computers have both a processor board and a system board. If you are instructed to replace either of them, and replacing one of them does not solve the problem, reinstall that board, and then replace the other one. • If an adapter or a device consists of more than one FRU, any of the FRUs may be the cause of the error. Before replacing the adapter or device, remove the FRUs one by one to see if the symptoms change. Replace only the FRU that changed the symptoms. Attention: The setup configuration on the computer you are servicing may have been customized. Running Automatic Configuration may alter the settings. Note the current configuration settings (using the View Configuration option); then, when service has been completed, verify that those settings remain in effect.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers. Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs.
General checkout General checkout This chapter presents the following information: • “What to do first” on page 20 • “Power system checkout” on page 21 Before you go to the checkout, make sure to read the following important notes: Important notes: • Only certified trained personnel can service the computer. • Before replacing any FRU, read the entire page on removing and replacing FRUs. • Carefully remove screws for reuse when replacing FRUs. • Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual What to do first When you do return an FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: 1. Name and phone number of servicer 2. Date of service 3. Date on which the machine failed 4. Date of purchase 5. Procedure index and page number in which the failing FRU was detected 6. Failing FRU name and part number 7. Machine type, model number, and serial number 8. Customer’s name and address Note for warranty: During the warranty period, the customer may be...
• If the computer does not charge during operation, go to “Checking operational charging”. To check the AC adapter, follow the steps below: 1. Unplug the AC adapter cable from the computer. 2. Measure the output voltage at the plug of the AC adapter cable. See the following figure: Voltage (V DC) Note: Output voltage for the AC adapter pin No. 2 may differ from the one you are servicing. 3. If the voltage is not correct, replace the AC adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to “Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB” on page 26. Note: Noise from the AC adapter does not always indicate a defect.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging. If the battery status indicator or icon does not light on, remove the battery pack and let it return to room temperature. Reinstall the battery pack. If the charge indicator or icon is still off, replace the battery pack. If the charge indicator still does not light on, replace the system board. Then reinstall the battery pack. If it is still not charged, go to the next section. Checking the battery pack Battery charging does not start until the Power Meter shows that less than 95% of the total power remains; under this condition the battery pack can charge to...
Related service information This chapter presents the following information: • “Restoring the factory contents by using recovery system” on page 23 • “Passwords” on page 24 • “Power management” on page 25 Restoring the factory contents by using recovery system Restore of factory default The Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB computers come with pre-installed recovery system. In order to save application files and the initial backed up files of the system, the hard disk in a Lenovo computer includes a hidden partition when it is shipped. If you need to restore the system to the point of your first boot up, just enter the recovery system. For details of the Recovery system, see the User Guide for Recovery system . Note: This will delete all the new data on the system partition (C drive), which is not recoverable.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Passwords As many as three passwords may be needed for any Lenovo computer: the power-on password (POP), the hard disk password (HDP), and the administrator password. If any of these passwords has been set, a prompt for it appears on the screen whenever the computer is turned on. The computer does not start until the password is entered.
Related service information Power management Note: Power management modes are not supported for APM operating system. Putting the computer to sleep or shutting it down When you have finished working with your computer, you can put it to sleep or shut it down. Putting your computer to sleep If you will be away from your computer for only a short time, put the computer to sleep. When the computer is in sleep mode, you can quickly wake it to resume use, bypassing the startup process. To put the computer to sleep, do one of the following: • Close the display lid. • Press the Power button. → Sleep. • Open the start menu, and then select Power Attention: Wait until the power indicator light starts blinking (indicating that the computer is in sleep mode) before you move your computer. Moving your computer while the hard disk is spinning can damage the hard disk, causing loss of data.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB This chapter presents the following product-specific service references and product-specific parts information: • “Specifications” on page 26 • “Status indicators” on page 28 • “Fn key combinations/Hotkeys” on page 29 • “FRU replacement notices” on page 30 • “Removing and replacing an FRU” on page 31 • “Locations” on page 59 • “Parts list” on page 61 Specifications...
Page 31
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Table 1. Specifications (continued) Feature Description Audio • 2.5 W speaker × 2 Bluetooth • Combined with wifi card wireless Keyboard • 6 rows Lenovo Keyboard Integrated • HD (720P) camera Battery • Li-ion battery pack, 4 cells, 79 Wh AC adapter • 20 V DC, 90 W Pre-installed • Win 10 (64 bits) operating • Windows next Gen and Windows Mobiles is required system...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Status indicators The system status indicators below show the computer status: Table 2. Status indicators AC power Indicator Symbol Meaning adapter status status The computer is in sleep mode or turned off; the battery has more than 20% charge. Disconnected The battery has between 5% and 20% Solid amber charge. Fast blinking The battery has between 1% and 5% amber charge. The battery is being charged. When Slow blinking battery charge reaches 20%, the amber blinking color changes to white.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Fn key combinations/Hotkeys The following table shows the function of each combination of Fn with a function key. Table 3. Fn key combinations Fn + B: Activates the break function. Fn + P: Activates the pause function. Fn + C: Enables/disables the scroll lock.
Hardware Maintenance Manual FRU replacement notices This section presents notices related to removing and replacing parts. Read this section carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections. • They do not easily come loose, even with shock or vibration. • They are harder to tighten.
Before touching it, establish personal grounding by touching a ground point with one hand or using an electrostatic discharge (ESD) strap (P/N 6405959) to remove potential shock reasons. Notes: • This manual applies to the following models: Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB. • The illustrations used in this manual are for Lenovo ideapad 720S-15IKB unless otherwise stated.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual 1010 Base cover Figure 1. Removal steps of base cover Remove the screws 1 and 2 from the bottom. Step Screw (quantity) Color Torque M2 × 8.5 mm, Phillips head, nylok-coated (4) Silver 1.0~1.5 kgf*cm D cover M2 × 4 mm, Phillips head, nylok-coated (6) Silver 1.0~1.5 kgf*cm D cover Use a plastic prying tool to aid in separation shown by arrows 3, 4 and 5. Remove the base cover 6.
Page 37
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Note: Applying labels to the base cover If you see the following labels on base cover, it needs to be peeled off from the old base cover, and put on the new base cover. Rating label GML label Office label Argentina CNC label Argentina label US/CA/TW WL label US/CA/TW BT label TW Warning label Korea KCC label Indonesia Postel label Indonesia D Side label India BIS label Israel WL/BT label Brazil WL/BT label South Africa WL label For some models, you also need to apply one or two FCC labels. Check the old base cover; if it has one or two FCC labels, find duplicates of them in the label kit and apply them to the new base cover. For the location of each label, refer to the following figures:...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual 1020 Battery pack For access, remove this FRU: • “1010 Base cover” on page 32 DANGER Only use the battery specified in the parts list for your computer. Any other battery could ignite or explode. Figure 2. Removal steps of battery pack Detach the battery pack connector in the direction shown by arrow 1, then remove the screws 2. Remove the battery pack in the direction shown by...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1030 Speaker For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 3. Removal step of speaker Unplug the speaker connector in the direction shown by arrow 1. Release the speaker cable from the cable guides. Remove the two speakers 2. When installing: Make sure that the connector is attached firmly.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual 1040 Solid state disk For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 4. Removal steps of solid state disk Remove the screw 1. Step Screw (quantity) Color Torque M2 × 2 mm, Phillips head, nylok-coated (1) Silver 1.0~1.5 kgf*cm Remove the solid state disk in the direction shown by arrow 2.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1050 DIMM For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 5. Removal steps of DIMM Open the memory cover in the direction shown by arrows 1. Release the two latches on both edges of the socket at the same time in the directions shown by arrows 2, and then unplug the DIMM in the direction shown by arrow 3. When installing: Insert the notched end of the DIMM into the socket. Push the DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed in the slot and is difficult to move. Note: When replacing the memory is completed, you need to restart the computer after the first reboot.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual 1060 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Important: The preinstalled WLAN module may only be replaced with a Lenovo approved module in order to comply with FCC and IC regulations. Refer to “Table 5. Parts list—Overall” on page 63 for Lenovo part numbers for the approved modules. Figure 6. Removal steps of PCI Express Mini Card for wireless LAN Disconnect the two wireless LAN cables (black, white) 1, and then remove the screw 2.
Page 43
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Figure 6. Removal steps of PCI Express Mini Card for wireless LAN (continued) Remove the card in the direction shown by arrow 3. When installing: • In models with a wireless LAN card that has two antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled MAIN, and the white cable (2nd) (AUX) into the jack labeled AUX on the card. • In models with a wireless LAN card that has three antenna connectors, plug the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into the jack labeled 3, and the white cable (2nd) (AUX) into the jack labeled 2 on the card.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual 1070 Fan and heat sink assembly For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 7. Removal steps of fan and heat sink assembly Unplug the connectors in the directions shown by arrows 1. Remove the screws 2 and loosen the screws 3.
Page 45
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Figure 7. Removal steps of fan and heat sink assembly (continued) Attention: Do not handle the heat sink assembly roughly. Improper handling can cause distortion or deformation and imperfect contact with components. When installing: Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, to the and parts shown in the figure above. Either too much or too little grease application can cause a thermal problem...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual 1080 IO board For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1060 PCI Express Mini Card for wireless LAN” on page 38 Figure 8. Removal steps of IO board Peel off the tape on the hinge 1. Detach the connector in the directions shown by arrows 2 and 3. Unplug the connector 4. Remove the screws 5 and 6. Step Screw (quantity) Color Torque M2 x 2.5 mm, Phillips-head, nylok-coated (1) Silver 1.0~1.5 kgf*cm I/O board M2.5 × 4 mm, Phillips head, nylok-coated (3) Silver 1.5~2.0 kgf*cm...
Page 47
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Figure 8. Removal steps of IO board (continued) Open the hinge in the direction shown by arrow 7. Remove the I/O board 8.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual 1090 Audio board For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 9. Removal steps of audio board Detach the audio board connector in the directions shown by arrows 1 and 2. Remove the screw 3. Step Screw (quantity) Color Torque M2 x 2.5 mm, Phillips-head, nylok-coated (1) Silver 1.0~1.5 kgf*cm Audio board When installing: Make sure that the connector is attached firmly. Remove the audio board 4.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1100 Fingerprint module For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 Figure 10. Removal steps of fingerprint module Peel off the tape that secures the fingerprint bracket 1. Detach the fingerprint connector in the directions shown by arrows 2 and 3. Remove the screw 4. Step Screw (quantity) Color Torque M2 x 2 mm, Phillips-head, nylok-coated (1) Black 1.0~1.5 kgf*cm FP Bracket When installing: Make sure that the connector is attached firmly.
Page 50
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Figure 10. Removal steps of fingerprint module (continued) Remove the fingerprint bracket 5 and the fingerprint board 6.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1110 System board Important notices for handling the system board: When handling the system board, bear the following in mind. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
Page 52
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Figure 11. Removal steps of system board (continued) Open the hinge in the direction shown by arrow 6. Remove the system board in the direction shown by arrow 7. Turn over the system board and then detach the I/O board connector in the directions shown by arrows 8 and 9. When installing: Make sure that the connector is attached firmly.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1120 Upper case For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 Speaker” on page 35 • “1060 PCI Express Mini Card for wireless LAN” on page 38 • “1070 Fan and heat sink assembly” on page 40 • “1080 IO board” on page 42 • “1090 Audio board” on page 44 • “1100 Fingerprint module” on page 45 • “1110 System board” on page 47 Figure 12. Removal steps of upper case Remove the DC-in cable 1.
Page 54
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Figure 12. Removal steps of upper case (continued) Rotate the upper case in the direction shown by arrow 2. Then remove the upper case from LCD unit.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1130 LCD unit For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 Speaker” on page 35 • “1060 PCI Express Mini Card for wireless LAN” on page 38 • “1070 Fan and heat sink assembly” on page 40 • “1080 IO board” on page 42 • “1090 Audio board” on page 44 • “1100 Fingerprint module” on page 45 • “1110 System board” on page 47 • “1120 Upper case” on page 49 Figure 13. Removal steps of LCD unit Remove the hinge cover in the direction shown by arrows 1.
Page 56
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Figure 13. Removal steps of LCD unit (continued) Remove the screws 2. Step Screw (quantity) Color Torque M2 × 2.5 mm, Phillips head, nylok-coated (3) Silver 1.0~1.5 kgf*cm Remove the strip cover in the direction shown by arrow 3.
Page 57
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Figure 13. Removal steps of LCD unit (continued) Remove the screws 4. Pull out the two pieces of adhesive tape with tweezers in the direction shown by arrows 5. Step Screw (quantity) Color Torque M2 × 2.5 mm, Phillips head, nylok-coated (2) Silver 1.0~1.5 kgf*cm Use a prying tool to separate the LCD module from the LCD cover in the direction shown by arrows 6.
Page 58
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Figure 13. Removal steps of LCD unit (continued) Lift the LCD module slightly 7. Detach the connector in the direction shown by arrow 8. Then remove the LCD panel. When installing: Make sure that the connector is attached firmly. Turn over the LCD panel. Peel off the adhesive tape. Open the latch on the EDP connector in the direction shown by arrow 9 and unplug the EDP connector j. Then remove the EDP cable.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1140 Connector change board, microphone board and integrated camera For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 Speaker” on page 35 • “1060 PCI Express Mini Card for wireless LAN” on page 38 • “1070 Fan and heat sink assembly” on page 40 • “1080 IO board” on page 42 • “1090 Audio board” on page 44 • “1100 Fingerprint module” on page 45 • “1110 System board” on page 47 • “1120 Upper case” on page 49 • “1130 LCD unit” on page 51 Figure 14. Removal steps of connector change board, microphone board and integrated camera Note: The integrated camera is stuck on the top center of the LCD cover.
Page 60
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Figure 14. Removal steps of connector change board, microphone board and integrated camera (continued) Remove the connector change board 3. Remove the two microphone boards in the direction shown by arrows 4. Detach the connector in the direction shown by arrow 5. Then remove the camera board in the direction shown by arrow 6. When installing: Stick the integrated camera to the top center of the LCD cover...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB 1150 LCD hinges For access, remove these FRUs in order: • “1010 Base cover” on page 32 • “1020 Battery pack” on page 34 • “1030 Speaker” on page 35 • “1060 PCI Express Mini Card for wireless LAN” on page 38 • “1070 Fan and heat sink assembly” on page 40 • “1080 IO board” on page 42 • “1090 Audio board” on page 44 • “1100 Fingerprint module” on page 45 • “1110 System board” on page 47 • “1120 Upper case” on page 49 • “1130 LCD unit” on page 51 • “1140 Connector change board, microphone board and integrated camera” on page 55 Figure 15. Removal steps of LCD hinges Remove the screws 1.
Page 62
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Figure 15. Removal steps of LCD hinges (continued) Release the two hinges in the direction shown by arrows 2.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Bottom and left-side view 1 Speakers 2 Louvers 3 Combo audio jack 4 Power status indicator Note: For the description of each indicator, see “Status indicators” on page 28. 5 Novo button 6 Type-C port 7 Battery status indicator Note: For the description of each indicator, see “Status indicators” on page 28. 8 AC power adapter jack...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Parts list This section presents the following service parts: • “Overall” on page 62 • “LCD FRUs” on page 66 • “Miscellaneous parts” on page 67 • “AC adapters” on page 67 • “Screws” on page 67 • “Power cords” on page 68 Note: Each FRU is available for all types or models, unless specific types or models are specified. Attention: Do not attempt to replace an FRU on your own. If an FRU is damaged, contact a Lenovo authorized servicer or a marketing representative for replacement or repair. Only qualified technicians can inspect or repair this product.
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual LCD FRUs In Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB, there are following type of LCD. • “15.6-in. HD”...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region: Table 10. Parts list—3-pin power cords ideapad ideapad Region 720S Touch- 720S-15IKB 15IKB CCC 3 pin ● ● 145000600 • LINETEK PC323+RVV300/300+LS15 1m Argentina 3 pin ● ● 145000599 • LINETEK LS15+H03VV-F+LP39 1m Switzerland 3 pin ● ● 145000597 • LINETEK LS15+H03VV-F+LP-37 1m Brazil 3 pin ●...
Page 73
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Table 10. Parts list—3-pin power cords (continued) ideapad ideapad Region 720S Touch- 720S-15IKB 15IKB UK 3 pin ● ● 145000561 • Longwell LP-61L+H03VV-F+LS-18 1m India 3 pin ● ● 145000560 • Longwell LP-67+BIS+LS-18 1m Italy 3 pin ● ● 145000559 • Longwell LP-22+H03VV-F+LS-18 1m Korea 3 pin ● ● 145000558 • Longwell LP-486+KTLH03VV-F+LS-5 1m Australia 3 pin ●...
Notices Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the...
Lenovo ideapad 720S-15IKB/Lenovo ideapad 720S Touch-15IKB Hardware Maintenance Manual Trademarks The following terms are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. Lenovo ideapad Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, products, or service names may be trademarks or service marks of others.