Table of Contents
Advertisement
Option
Advanced
Table 17. System Logs
Option
BIOS Events
Table 18. Advanced configurations
Option
ASPM
System Setup overview
System Setup allows you to:
•
Change the system configuration information after you add, change, or remove any hardware in your
computer.
•
Set or change a user-selectable option such as the user password.
•
Read the current amount of memory or set the type of hard drive installed.
Before you use System Setup, it is recommended that you write down the System Setup screen
information for future reference.
CAUTION: Unless you are an expert computer user, do not change the settings for this program.
Certain changes can cause your computer to work incorrectly.
Accessing System Setup
1.
Turn on (or restart) your computer.
2.
After the white Dell logo appears, press F2 or F12 immediately.
The System Setup page is displayed.
NOTE: If you wait too long and the operating system logo appears, wait until you see the
desktop. Then, shut down or restart your computer and try again.
Description
Allows you to turn on the Verbose mode for advanced debugging. This
option is disabled by default.
Description
Displays the system event log and allows you to:
•
Clear Log
•
Mark all Entries
Description
Allows you to activate the state power management.
•
Auto (Default)
•
Disabled
•
L1 Only
45
Hide quick links:
Advertisement
Table of Contents
