Using A Microsd Card - Lenovo ThinkPad X1 Gen 3 User Manual
Hide thumbs
Also See for ThinkPad X1 Gen 3:
- Safety, warranty, and setup manual (15 pages) ,
- Safety, warranty, and setup manual (17 pages) ,
- Setup manual (10 pages)
Table of Contents
Advertisement
To pair your computer with an NFC-enabled smartphone:
Before you start, ensure that the smartphone screen is facing upward.
1. Tap the smartphone on the NFC touchpoint as shown.
2. Slowly move the smartphone in the upright direction within a 10 mm (0.39 inches) distance. Then hold
the smartphone for seconds until you are prompted that the smartphone has been successfully
detected.
Enabling the NFC feature
In case that the NFC feature of your computer is disabled, do the following to enable the NFC feature:
1. Open the Start menu
2. Tap Settings ➙ Network & Internet ➙ Airplane mode.
3. Tap the NFC control to turn it on.
If you still cannot enable the NFC feature, check the NFC setting in the ThinkPad Tablet Setup app by doing
the following:
1. Open the ThinkPad Tablet Setup app. See "ThinkPad Tablet Setup app" on page 43.
2. Tap Security ➙ I/O Port Access.
3. Set the NFC option to On.
Using a microSD card
Your computer has a nano-SIM-card and microSD card slot on the left side of the computer. The slot
supports the following types of Secure Digital (SD) cards:
• Secure Digital eXtended-Capacity (SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
This section provides the basic instructions on installing and removing the microSD card. For more
information about data transfer, refer to the documentation of the microSD card.
Attention:
16
User Guide
.
- Quick Links:
- Table of Contents
- Connectors and Indicators
Hide quick links:
Advertisement
Table of Contents
