Canon IMAGEFORMULA DR-2580C Easy Start Manual
Cannon scanner user manual
Hide thumbs
Also See for IMAGEFORMULA DR-2580C:
- Service manual (254 pages) ,
- Startup manual (92 pages) ,
- Brochure & specs (8 pages)
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Easy Start Guide
Thank you for purchasing the Canon imageFORMULA DR-2580C.
This Easy Start Guide describes the procedure for setting up the scanner for use. Follow the
procedures outlined in this Easy Start Guide to set up the scanner. Details on using the
scanner are described in the User's Guide packaged with the scanner. Before you start using
the scanner, make sure to thoroughly read the User's Guide.
Checking the Packing List
When you unpack your scanner, make sure that it contains all of the following accessories.
If any of the items listed below are missing or damaged, contact your local authorized Canon
dealer or service representative.
DR-2580C Scanner
AC Adapter/Power Cord
USB Cable
DR-2580C
Easy Start Guide
User's Guide
Setup Disc
(This Manual)
Retard Roller
Roller Unit
Job Labels
0880281099-L5T1P7-BR01
C A N O N
6 3 9 0
D I X I E
C A N A D A
R D
I N C .
M I S S I S S A U G A
O N
L 5 T
9 Z 9
Quick Reference
Warranty Card
Registration Card
Guide
(U.S.A and Canada only)
(U.S.A and Canada only)
Note
To use the roller unit and retard roller, you need to install them in the scanner.
"Installing the Rollers"
The DR-2580C Setup Disc contains the "DR-2580C Scanner Driver" and
"CapturePerfect 3.0". For details, refer to "About the Setup Disc" on page 16 of
the User's Guide.
The following application software is included on the application software disk
that comes with this product.
[Presto! BizCard Reader SE] Name card management software provided with the
multi-language OCR made by NewSoft Technology Corp.
[OmniPage SE]* Optical character recognition (OCR) software with multiple
language support, made by Nuance Communications Inc.
[PaperPort
®
11]* File management application that makes it easy to store, orga-
nize, and retrieve digital documents, made by Nuance Communications Inc.
* In order to receive support of OmniPage SE and PaperPort
upgrade to a Professional version.
Please see following URL for upgrade.
http://www.nuance.com/partneroffer/canon
Items included in this package are subject to change without notice.
Keep the package and packing materials for storing or transporting the scanner.
After checking the package contents, you need to prepare the
scanner for use. (
STEP2)
Removing the Packing Materials and
Installing the Rollers
Perform the following steps to remove the scanner from the box, remove the orange
tape and protective sheets from the scanner, and install the roller unit and retard roller
in the scanner.
1.
Peel off all the orange tape from the outer casing.
When peeling off the protective tape fastening the document eject tray extension,
hold the document eject tray extension firmly in place with your hand.
Document Eject Tray Extension
PUB. CE-IE-637
©CANON ELECTRONICS INC. 2008
2.
Open the rear cover and remove the protective sheet.
3 .
After pushing both sides of the rear cover closed, open the document feed tray.
4 .
While squeezing the OPEN knob from both sides, open the upper unit.
OPEN Knob
Document Guide
Adapters
5.
Remove the orange protective tape together with the protective sheet.
Application
Software Disc
6.
Check that all the protective tape and protective sheets have been removed,
and then install the roller unit and the retard roller in their designated locations.
Adobe Acrobat
Setup Disc
Roller Unit
Retard Roller
6-1
Follow the steps below to install the roller unit in the upper unit.
1. Flip up the lock lever (1), and slide it to the right (2).
2. Load the roller unit onto the scanner's shaft.
®
11, you need to
3. Slide the protrusion on the roller unit into the groove on the scanner, and then lift the
roller unit into place.
4. Slide (1) and close (2) the lock lever to lock the roller unit.
6-2
Follow the steps below to install the retard roller on the inside of the roller cover.
1. Remove the roller cover.
Trademarks
• Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be trademarks or registered trademarks in other countries.
• Microsoft Windows
®
is a registered trademark of Microsoft USA in the United States and other countries.
PRINTED IN JAPAN
• Other brands and product names used in this manual may be trademarks or registered trademarks of their respective companies.
Rear Cover
Document Feed Tray
Upper Unit
Lock Lever
2.
Flip up the retard roller lock lever (1), and slide it to the right (2)
3. Load the retard roller so that the notch in the roller is aligned with the scanner's shaft.
4. Slide the lock lever to the left so that it fits into the retard roller hole (1), and then
press the lock lever completely down to lock the retard roller (2).
5. Attach the roller cover.
7.
Gently close the upper unit.
Make sure it is closed securely by pushing on both edges until you hear a click.
The scanner is now ready for use.
Next, you need to install the scanner software. (
Installing the Software
Install the software before connecting the scanner to the computer.
Warning
Do not connect the scanner to the computer before installing the software. If
you connect the scanner and turn it ON before you install the software, the
wizard screen on the right will appear. If this wizard is displayed, click the
[Cancel] button to exit the wizard, and turn the scanner OFF.
Wizard Screen (Windows XP)
Be sure to log on with administrator privileges when logging on to Windows.
Close all other applications before installing the software.
1.
Turn ON your computer.
2.
Insert the DR-2580C Setup Disc into the
computer's CD-ROM drive.
The setup wizard automatically starts up when
you insert the CD-ROM into the CD-ROM
drive. If the setup wizard does not start up, run
the setup.exe application on the CD-ROM.
STEP3)
Continued on back side
Advertisement
Related Manuals for Canon IMAGEFORMULA DR-2580C
Summary of Contents for Canon IMAGEFORMULA DR-2580C
-
Page 1: Checking The Packing List
1. Flip up the lock lever (1), and slide it to the right (2). 2. Load the roller unit onto the scanner’s shaft. 3. Slide the protrusion on the roller unit into the groove on the scanner, and then lift the roller unit into place. -
Page 2: Connecting The Scanner To Your Pc
Connect the power cord to the AC adapter (1 1 1 1 1 ). Plug the AC adapter into the connector on the left side of the scanner (2 2 2 2 2 ). Plug the power cord into the power outlet (3 3 3 3 3 ).