hit counter script
Table of Contents

Advertisement

Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
C9200-L C9200L-24T-4X-A
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
First Published: 2018-11-19
Last Modified: 2020-11-17
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
o cerca il tuo prodotto tra le
migliori offerte di Switch
Cisco Catalyst

Advertisement

Table of Contents
loading

Summary of Contents for Cisco C9200L-24T-4X-A

  • Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Cisco Catalyst C9200-L C9200L-24T-4X-A o cerca il tuo prodotto tra le migliori offerte di Switch Cisco Catalyst 9200 Series Switches Hardware Installation Guide First Published: 2018-11-19 Last Modified: 2020-11-17 Americas Headquarters Cisco Systems, Inc.
  • Page 2 © 2018–2020 Cisco Systems, Inc. All rights reserved.
  • Page 3: Table Of Contents

    C H A P T E R 2 Installing the Switch Preparing for Installation Safety Warnings Installation Guidelines Shipping Box Contents Tools and Equipment Verifying Switch Operation Planning a Switch Data Stack Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 4 Power Supply Modules Overview Finding the Power Supply Module Serial Number Installation Guidelines Installing or Replacing an AC Power Supply Module C H A P T E R 5 Installing a Fan Module Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 5 Accessing the CLI Through the Console Port Connecting the RJ-45 Console Port Connecting the USB Console Port Installing the Cisco Microsoft Windows USB Device Driver Installing the Cisco Microsoft Windows 7 USB Driver Uninstalling the Cisco Microsoft Windows USB Driver...
  • Page 6 Contents Console LED System LED MASTER LED STACK LED PoE LED Port LEDs and Modes Beacon LED RJ-45 Console Port LED Fan LED Uplink Port LEDs Introduction Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 7: Product Overview

    Network Configurations, on page 13 Switch Models The Cisco Catalyst 9200 Series switches have four modular (C9200) and eight fixed (C9200L) switch models. The following tables describe all the available Cisco Catalyst 9200 Series switches and the features supported. Table 1: C9200L Switch Models and Descriptions...
  • Page 8 2 power supply slots; 2 field-replaceable fans; supports StackWise-160. C9200-48T Stackable 48x1G ports; 4x1G and 4x10G network modules for uplink ports; 2 power supply slots; 2 field-replaceable fans; supports StackWise-160. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 9: Front Panel Components

    4x10G network modules for uplink ports; 2 power supply slots; 2 field-replaceable fans; supports StackWise-160. Front Panel Components This section describes the front panel components of Cisco Catalyst 9200 Series switches : • 24 or 48 downlink ports of one of the following types: • 10/100/1000 •...
  • Page 10: 10/100/1000 Ports

    • PoE/PoE+ ports: Support for IEEE 802.3af-compliant powered devices (up to 15.4W PoE per port) and support for IEEE 802.3at-compliant powered devices (up to 30W PoE+ per port). • Support for pre-standard Cisco powered devices. • Configurable support for Cisco intelligent power management, including enhanced power negotiation, power reservation, and per-port power policing. See the...
  • Page 11: Multigigabit Ethernet Ports

    RJ-45 console interface speeds. If you use the USB mini-Type B console port, the Cisco Windows USB device driver must be installed on any PC connected to the console port (for operation with Microsoft Windows). Mac OS X or Linux do not require special drivers.
  • Page 12: Usb Type A Port

    The port supports Cisco USB flash drives with capacities from 128 MB to 8 GB. USB devices with port densities of 128 MB, 256 MB, 1 GB, 4 GB, and 8 GB are supported. When combined with stacking, you can upgrade other switches in the stack from an USB key inserted in any switch within the stack.
  • Page 13 Product Overview Uplink Ports Figure 4: Network Module C9200-NM-4G Module slot LEDs The following table lists the optional Cisco Catalyst 9200 Series Switches uplink network modules with 4x1G, 4x10G, 2x25G, and 2x40G slots. Table 3: Supported Network Modules Network Module Description C9200-NM-4G This module has four 1G SFP module slots.
  • Page 14: Rear Panel

    Power supply module StackWise-80 port slots connectors Figure 6: Rear Panel of a C9200 Switch RJ-45 console port Blue Beacon LED Modular fan modules on MGMT (RJ-45 C9200 switches 10/100/1000 management port) Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 15: Rfid Tag

    Connecting to the StackWise Ports, on page Caution Use only approved cables, and connect only to similar Cisco equipment. Equipment might be damaged if connected to nonapproved Cisco cables or equipment. Power Supply Modules The switch has a field replaceable main AC power supply module and a redundant hot-swappable field replaceable AC power supply module.
  • Page 16 740W PWR-C6-600WAC C9200-48PB PWR-C5-1KWAC or 740W 1440W PWR-C6-1KWAC C9200-48PL PWR-C5-600WAC or 370W 740W PWR-C6-600WAC C9200-24PXG PWR-C5-600WAC or 370W 740W PWR-C6-600WAC C9200-48PXG PWR-C5-1KWAC or 740W 1440W PWR-C6-1KWAC C9200L Switches C9200L-24P-4G PWR-C5-600WAC 370W 740W Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 17: Fan Modules

    Power output to switch active. Output has failed. Fan Modules The Cisco Catalyst 9200 Series Switches supports two internal fixed 12-V fan modules and two field-replaceable fan modules (C9200-FAN=). The C9200 models support modular fans whereas the C9200L models provide two internal fixed fans.
  • Page 18: Ethernet Management Port

    Table 6: Ethernet Management Port LED Color Description Green Link up but no activity. Blinking green Link up and activity. Link down. RJ-45 Console Port The RJ-45 console port connection uses the supplied RJ-45-to-DB-9 female cable. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 19: Network Configurations

    See the switch software configuration guide for network configuration concepts and examples of using the switch to create dedicated network segments and interconnecting the segments through Fast Ethernet and Gigabit Ethernet connections. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 20 Product Overview Network Configurations Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 21: Installing The Switch

    Ethernet cables must be shielded when used in a central office environment. Statement 171 Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 22 Installation of the equipment must comply with local and national electrical codes. Statement 1074 Warning To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 inches (7.6 cm). Statement 1076 Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 23: Installation Guidelines

    Some components are optional, depending on your order. Note Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative or reseller for instructions. Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative or reseller for instructions.
  • Page 24: Tools And Equipment

    Before you install the switch in a rack or on a table or shelf, power on the switch and verify that it passes POST. To power on the switch, plug one end of the AC power cord into the switch AC power connector, and plug the other end into an AC power outlet. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 25: Planning A Switch Data Stack

    • Number of switches in the stack. You can create data stacks with up to eight switches in a stack. • Length of the cable. Order the appropriate cable from your Cisco sales representative. The length of the cable depends on your configuration. These are the different sizes available: •...
  • Page 26: Data Stack Cabling Configurations

    This is an example of a recommended configuration that uses the supplied 0.5-meter StackWise cable. In this example, the switches are stacked in a vertical rack or on a table. This configuration provides redundant Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 27: Data Stack Bandwidth And Partitioning Examples

    Figure 11: Example of a Data Stack with Full Bandwidth Connections This figure shows an example of a stack of switches with incomplete StackWise cabling connections. This stack provides only half bandwidth and does not have redundant connections. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 28 If the bottom switch is a member (not active or standby switch), it reloads. Figure 14: Example of a Partitioned Data Stack with a Failover Condition Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 29: Power-On Sequence For Switch Stacks

    For conditions that can cause a stack reelection or to manually elect the active switch, see the stacking software configuration guide Stack Manager and High Availability Configuration Guide for Cisco Catalyst 9200 Series Switches on Cisco.com.
  • Page 30: Mounting The Switch

    Statement 1006 Figure 15: Rack-Mounting Brackets This figure shows the standard 19-inch brackets and other optional mounting brackets. You can order the optional brackets (ACC-KIT-T1=) from your Cisco sales representative. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 31: Attaching The Rack-Mount Brackets

    Use two Phillips flat-head screws to attach the long side of the bracket to each side of the switch for the front- or rear-mounting positions. The following illustration shows a C9200L switch. C9200 switches follow the same method for installing the rack mount bracket. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 32 Attaching the Rack-Mount Brackets Figure 16: Attaching Brackets for 19-inch Racks in a two-post rack front-mount position Figure 17: Attaching Brackets for 19-inch Racks in a two-post rack rear-mount position Number-8 Phillips flat-head screws Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 33: Mounting The Switch In A Rack

    To install the switch on a table or shelf, locate the adhesive strip with the rubber feet in the mounting-kit envelope. Step 2 Attach the four rubber feet to the four circular etches on the bottom of the chassis. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 34: After Switch Installation

    Before connecting the StackWise cables, read the "Planning a Switch Data Stack" section. Always use a Cisco-approved StackWise cable to connect the switches. Procedure Step 1 Remove the dust covers from the StackWise cables and StackWise ports, and store them for future use. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 35 Connect the cable to the StackWise port on the switch rear panel. a) Align the StackWise cable connector with the StackWise adapter in the StackWise port. b) Insert the StackWise cable connector into the StackWise port. Make sure that the Cisco logo is on the top side of the connector.
  • Page 36 (installing and removing it up to 200 times is supported). When you need to remove the StackWise cable from the connector, make sure to fully unscrew the correct screws. When the connectors are not being used, replace the dust covers. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 37: Connecting Devices To The Ethernet Ports

    The 10/100/1000 PoE and PoE+ ports have the same autonegotiation settings and cabling requirements that are described in the 10/100/1000 Ports, on page 4. These ports can provide PoE and PoE+ inline power. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 38 PoE inline power supports devices compliant with the IEEE 802.3af standard, as well as prestandard Cisco IP Phones and Cisco Aironet Access Points. Each port can deliver up to 15.4 W of PoE. PoE+ inline power supports devices compliant with the IEEE 802.3at standard, by delivering up to 30 W of PoE+ power per port to all switch ports.
  • Page 39: Installing A Network Module

    Safety Warnings This section includes the installation cautions and warnings. Translations of the safety warnings are available in the Regulatory Compliance and Safety Information for Cisco Catalyst 9200 Series Switches . Read this section before you install a network module.
  • Page 40: Installing A Network Module

    Note The switch generates logs when you insert or remove a network module with SFP/SFP+ slots. Use only supported network modules and Cisco pluggable transceivers. Each module has an internal serial EEPROM that is encoded with security information. The network module is hot-swappable. If you remove a module, replace it with another network module or a blank module.
  • Page 41 Position the module face up to install it in the module slot. Slide the module into the slot until the screw makes contact with the chassis. Fasten the captive screws to secure the network module in place. Figure 22: Installing the Network Module in the Switch Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 42: Removing A Network Module

    Place the module that you removed in an antistatic bag or other protective environment. Finding the Network Module Serial Number If you contact Cisco Technical Assistance regarding a network module, you need to know its serial number. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 43: Installing And Removing Pluggable Transceiver Modules

    Installing a Cisco Pluggable Transceiver Module Before you begin See the switch release notes on Cisco.com for the list of supported a Cisco pluggable transceiver modules (SFP, SFP, SFP28 and QSFP+ modules). Use only supported modules on the switch. For the latest information...
  • Page 44 If the module has a bale-clasp latch, close it to lock the transceiver module in place. Step 6 Remove the transceiver module dust plugs and save. Step 7 Connect the transceiver module cables. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 45: Removing A Cisco Pluggable Transceiver Module

    Step 5 Grasp the transceiver module and carefully remove it from the slot. Step 6 Place the transceiver module in an antistatic bag or other protective environment. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 46 Installing a Network Module Removing a Cisco Pluggable Transceiver Module Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 47: Installing A Power Supply Unit

    PWR-C6-125WAC 125 W AC power supply module PWR-C6-600WAC 600 W AC power supply module PWR-C6-1KWAC 1000 W AC power supply module PWR-C5-BLANK Blank cover 1. Supported from Cisco IOS XE Gibraltar 16.11.1. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 48 AC power supply module has a power cord for connection to an AC power outlet. The modules use an 18-AWG power cord. The following illustrations show the power supply modules. Figure 26: 1000W AC Power Supply Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 49 AC power cord connector PS OK LED If no power supply is installed in a power supply slot, install a power supply slot cover. Figure 28: Power Supply Slot Cover Release handles Retainer clips Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 50: Finding The Power Supply Module Serial Number

    Finding the Power Supply Module Serial Number If you contact Cisco Technical Assistance regarding a power supply module, you need to know the serial number. See the following illustrations to find the serial number. You can also use the CLI to find out the serial number.
  • Page 51: Installation Guidelines

    Do not reach into a vacant slot or chassis while you install or remove a module. Exposed circuitry could constitute an energy hazard. Statement 206 Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030 Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 52: Installing Or Replacing An Ac Power Supply Module

    Installing a Power Supply Unit Installing or Replacing an AC Power Supply Module Warning If a Cisco external power system is not connected to the switch, install the provided connector cover on the back of the switch. Statement 386 Installing or Replacing an AC Power Supply Module...
  • Page 53 Connect the power cord to the power supply and to an AC power outlet. Turn on the power at the power source. Step 8 Confirm that the power supply AC OK and PS OK LED are green. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 54 Installing a Power Supply Unit Installing or Replacing an AC Power Supply Module Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 55: Installing A Fan Module

    Finding the Fan Module Serial Number, on page 51 Fan Modules Overview Cisco Catalyst 9200 (C9200) Series switches support two field-replaceable fan modules providing N+1 redundancy support. The switch should be able to operate at ambient temperature if one of the fans fails.
  • Page 56: Installation Guidelines

    When the fan is operating, a green LED is on in the top left corner of the fan. Figure 33: Installing a Fan Module Warning Do not reach into a vacant slot when installing or removing a module. Exposed circuitry is an energy hazard. Statement 206 Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 57: Finding The Fan Module Serial Number

    Finding the Fan Module Serial Number Finding the Fan Module Serial Number If you contact Cisco Technical Assistance regarding a fan module, you need to know the fan module serial number. See the following illustration to find the serial number.
  • Page 58 Installing a Fan Module Finding the Fan Module Serial Number Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 59: Configuring The Switch

    Ethernet Interface Global Unique Identifier (GUID). 4. Add a new REG_BINARY DhcpClientIdentifier with Data 77 65 62 75 69 for webui. You need to manually type in the value. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 60 5. Restart the PC for the configuration to take effect. Setting up the DHCP Client Identifier on the client for MAC 1. Go to System Preferences >Network >Advanced >TCP >DHCP Client ID: and enter webui. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 61 (PC/MAC). Step 3 Set up your PC/MAC as a DHCP client, to obtain the IP address of the switch automatically. You should get an IP address within the 192.168.1.x/24 range. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 62 The Day 0 username and password depends on the software version of your switch. For Cisco Catalyst switches running software versions earlier than Cisco IOS XE Fuji 16.9.x, the default username is webui; the default password is the serial number of the switch chassis.
  • Page 63: Creating User Accounts

    Log on using the default username and password provided with the device. These details differ based on the software version of your switch. The default username is cisco; the default password is the serial number of the switch chassis. For Cisco Catalyst switches running software versions earlier than Cisco IOS XE Fuji 16.9.x, the default username is webui;...
  • Page 64 If you did not select Wired Network, in the earlier step, continue to the next screen to verify your configuration on the Day 0 Config Summary screen, and click Finish. To automatically configure your device based on a site profile, click Setup Options, and select Wired Network. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 65: Configuring Your Device Based On A Site Profile

    To ease your configuration tasks and save time, choose a site profile based on where your device may be installed and managed in your network. Based on the site profile you choose, your device is automatically configured according to Cisco best practices. You can easily modify this default configuration, from the corresponding detailed configuration screens.
  • Page 66 VLANs. Downlink Interfaces Downlink ports Downlink ports Downlink ports configured in Access configured in Access configured in Access mode mode mode Port-channel Not configured Port-channel to Port-channel to distribution created distribution created Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 67 Spanning Tree Mode RPVST+ RPVST+ RPVST+ Mode Transparent Mode Transparent Mode Transparent UDLD Enabled Enabled Enabled Error Disable Recovery Recovery mode set to Recovery mode set to Recovery mode set to Auto Auto Auto Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 68 Trunk mode configured in Trunk mode configured in Trunk mode Port-channel Port-channel to core Port-channel to core or Port-channel to core or created access created distribution created Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 69 Recovery mode set to Auto Recovery mode set to Auto Port Channel Load Balance Source Destination IP Source Destination IP Version 2 Version 2 Enabled Enabled VTY Access to Switch Enabled Enabled Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 70: Configuring Switch Wide Settings

    Figure 45: Site Profile - Core Switches Configuring Switch Wide Settings Configuring VLAN Settings Procedure Step 1 In the VLAN Configuration section, you can configure both data and voice VLANs. Type a name for your data VLAN. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 71: Configure Stp Settings

    Step 5 To ensure that your device is configured with the right time, date and timezone, enter the IP address of the NTP server with which you want to synchronize the device time. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 72: Configuring Port Settings

    Choose an option from the Select Switch drop-down list. Step 3 Make selections from the Available list of interfaces based on how you want to enable them and move them to the Enabled list. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 73: Configuring Vty Lines

    VTY lines, users might face issues with connecting to the WebUI. You must change the default value for VTY Line, 0-15 (or 0-4 in some models), to 0-30 to allow up to thirty simultaneous sessions. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 74: Configuring The Switch Using The Cli

    Connecting the RJ-45 Console Port Procedure Step 1 Connect the RJ-45-to-DB-9 adapter cable to the 9-pin serial port on the PC. Connect the other end of the cable to the switch console port. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 75: Connecting The Usb Console Port

    If you are connecting the switch USB console port to a Windows-based PC for the first time, install the USB driver. See Installing the Cisco Microsoft Windows USB Device Driver, on page USB Type A port on the switch provides file system support and is NOT a console port. See USB Note Type A Port section.
  • Page 76: Installing The Cisco Microsoft Windows Usb Device Driver

    Installing the Cisco Microsoft Windows 7 USB Driver Procedure Step 1 Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it. Note You can download the driver file from the Cisco.com site for downloading the switch software.
  • Page 77 Configuring the Switch Uninstalling the Cisco Microsoft Windows 7 USB Driver Step 5 When the InstallShield Wizard Completed window appears, click Finish. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 78 Configuring the Switch Uninstalling the Cisco Microsoft Windows 7 USB Driver Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 79: Technical Specifications

    23°F to 113°F (–5°C to 45°C) up to 5000 feet (1500m) 23°F to 104°F (–5°C to 40ºC) up to 10,000 feet (3000m) Storage temperature –40 to 158°F (–40 to 70°C) Relative humidity 10 to 90% (noncondensing) Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 80 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.9 cm) C9200L-48P-4G C9200L-48P-4G 1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm) 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.9 cm) C9200L-48P-4X C9200L-48P-4X Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 81 11.5 lb (5.2 kg) C9200-24PXG 11.4 lb (5.15 kg) C9200-48PXG 11.9 lb (5.44 kg) C9200L-24T-4G 9.6 lb (4.35 kg) C9200L-24P-4G 10.4 lb (4.71 kg) C9200L-48T-4G 10 lb (4.53 kg) C9200L-48P-4G 10.6 lb (4.8 kg) Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 82 Dimensions (H x D x W) The dimensions shown include the extraction handle and the keying feature. PWR-C5-125WAC 1.58 x 4.0 x 7.6 in. (40.1 X 101.6 X 193 mm) PWR-C5-600WAC PWR-C5-1KWAC PWR-C6-125WAC PWR-C6-600WAC PWR-C6-1KWAC Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 83: Specifications For The Power Supplies And Fans

    Table 21: Fan Module Environmental and Physical Specifications Environmental Ranges Operating temperature 23 to 176°F (–5 to 80°C) Storage temperature –40 to 185°F (–40 to 85°C) up to 15,000 ft (4500 m) Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 84 Physical Specification Dimensions (H x D x W) 1.62 x 1.73 x 4.24 in. (4.11 x 4.39 x 10.76 cm) Weight (for three fans) 0.48 lb (0.21 kg) Operating Specification 20 cfm Airflow Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 85: Switch Leds

    You can use the switch LEDs to monitor switch activity and its performance. Figure 51: Switch Front Panel LEDs Console LED The console LED indicates whether the USB console port or the bluetooth console is enabled. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 86: System Led

    Switch is the stack master or a standalone switch. Fast blinking green Switch is in stack standby mode. Amber An error occurred when the switch was selecting the stack master switch, or another type of stack error occurred. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 87: Stack Led

    Stack member 1 LED blinks green to show that this is switch 1 in the stack. Stack member 2 LED blinks green to show that this is switch 2 in the stack. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 88: Poe Led

    Active The active switch status. STACK Stack member status Stack member status. StackWise port status The StackWise port status. See STACK LED, on page The PoE+ port status. The PoE+ port status. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 89 The switch is the active switch. Amber Error during active switch election. Blinking green Switch is a standby member of a data stack and assumes active responsibilities if the current active switch fails. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 90: Beacon Led

    The blue beacon on the front panel is a button labeled UID, and on the back panel it is a LED labeled BEACON. Color/State Description Solid blue The operator has indicated that the system needs attention. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 91: Rj-45 Console Port Led

    LED. • For QSFP+ ports, a 40G labeling nomenclature is used, where 40G = 40 Gigabit. The The G label appears to the left of the uplink port LED. Cisco Catalyst 9200 Series Switches Hardware Installation Guide...
  • Page 92 Link is off due to a fault or because it has exceeded a limit set in the switch software. Link faults occur when non-compliant cabling is connected to an SFP/SFP+ Caution port. Use only standard-compliant cabling to connect to Cisco SFP/SFP+ ports. You must remove from the network any cable or device that causes a link fault. Amber Link for the SFP/SFP+/SFP28/QSFP+ has been disabled.
  • Page 93 Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html.

Table of Contents