Table of Contents
Advertisement
Steps
1. Connect the power and SATA cables to the optical drive while holding the bracket upside down.
2. Hold the bracket upright and align the mounting points with the ones on the chassis.
3. Push the bracket until the assembly is secured onto the chassis.
4. Move the lock handle from the locking mechanism towards the right to lock the bracket in place.
5. Route the optical drive's power and data cables through the routing guide on the bracket.
6. Route the hard-drive power and SATA cables through the routing guide on the lock.
Next steps
1. Install the
2.5/3.5-inch hard-drive
2. Install the
front
bezel.
3. Install the
side
cover.
4. Follow the procedure in
Removing the slim optical-drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
caddy.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
31
Advertisement
Table of Contents
