Canon GP-300 Online Manual page 103

Hide thumbs Also See for GP-300:

Table of Contents

6. Check the length of the roll paper and tap OK.

• The length of the roll paper to be displayed can be set in Roll length (change default).

Setting the Default Value of the Amount of Roll Paper Left when Managing by the Barcode

• If the length of the roll paper to be displayed is different from the length of the roll paper actually

used, set the actual length.

7. Select the timing when the warning message appears.

Setting the Default Value of the Amount of Roll Paper Left when Managing by the

When you select Barcodes in Manage remaining roll amount and if you feed roll paper on which no

barcode is printed, such as new roll paper, the screen to enter the roll paper length (remaining amount)

In this screen, the length (remaining amount) of default value appears. If the length is not correct, tap the

screen and enter a correct length.

When you want to change the length (remaining amount) of default value, follow the steps below.

1. Tap paper settings display area on Home screen of operation panel.

• If the Home screen does not appear, press the HOME button.

2. Tap Paper settings.

3. Tap Advanced.

4. Tap Roll length (change default).

5. Specify the length of the roll paper and tap OK.

Troubleshooting

Gp-200 Gp-5300 Gp-5200