Table of Contents
Advertisement
Steps
1. Place the heat sink on the system board.
2. Tighten the seven captive screws that secure the heat sink to the system board.
NOTE:
Tighten the captive screws in the sequential order mentioned on the heat sink [1 > 2 > 3 > 4> 5 > 6 > 7].
NOTE:
The number of screws varies depending on the configuration ordered.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Power-button board
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
I/O
board.
6. Remove the
display
assembly.
About this task
The following images indicate the location of the power button and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
47
- Quick Links:
- Display Assembly
Hide quick links:
Advertisement
Table of Contents
