Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet. Antes de instalar este produto, leia as Informações sobre Segurança. Antes de instalar este producto lea la información de seguridad. Läs säkerhetsinformationen innan du installerar den här produkten. iv iv L215p Wide Flat Panel Monitor User’s Guide...
The illustration below shows the tile range of the monitor. For more information, see “Positioning your monitor” on page 2-1. Swivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. L215p Wide Flat Panel Monitor User’s Guide Chapter 1.
Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position). Please see the instructions that come with the cable lock to learn how to attach it. L215p Wide Flat Panel Monitor User’s Guide...
Setting up your monitor This section provides information on how to set up your monitor. Connecting and turning on your monitor Note: Be sure to read the Safety Information located in the Monitor Safety, Troubleshooting, power cord. and Warranty Guide before carrying out this procedure. Power off your computer and all attached devices, and unplug the computer power cord.
Page 9
IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used. L215p Wide Flat Panel Monitor User’s Guide...
Page 10
Side view after all cables have been placed. Power on the monitor and the computer. To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions. 10. To optimize your monitor image, press the Automatic Image Setup key. Automatic image setup requires that the monitor is warmed up for at least 15 minutes.
Thank you for purchasing this Lenovo product. Please take a few moments to register your product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing products and services that are important to you, as well as in developing better ways to communicate with you.
Positioning your monitor Position and adjust your computer monitor for comfortable viewing by considering the following items: • Viewing distance: Optimal viewing distances for monitors range from approximately 510mm to 760mm (20 in to 30 in) and can vary depending on ambient light and time of day.
A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work. L215p Wide Flat Panel Monitor User’s Guide...
Adjusting your monitor image This section describes the control features to adjust your monitor image. Using the direct access controls The direct access controls can be used when the On Screen Display (OSD) is not displayed. Table 2-1. Direct access controls Icon Control Description...
Enables DDC/CI by default. Use OSD Exit Key, Press and hold the button for 10 seconds to disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen. L215p Wide Flat Panel Monitor User’s Guide to open the main OSD menu. to move among the icons. Select an icon and press to select that function.
Page 16
Table 2-2. OSD functions OSD Icon on Main Menu Submenu Brightness Brightness/ Contrast Contrast Horizontal Position Image Position Vertical Position Automatic Image Setup Manual Image Properties Color Input video signal Controls and Adjustments Description Adjusts overall brightness Adjusts difference between light and dark areas Moves the image left or right.
Page 17
NOVO VISION Scaling Information Options Menu Language Menu Position factory default Accessibility MUTE L215p Wide Flat Panel Monitor User’s Guide Controls and Adjustments Description Optimize screen for specific tasks • Original AR:same aspect ratio with input signal • Full Screen :expand image to full screen Shows resolution, refresh rate, and product details.
Selecting a supported display mode The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes. The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.
For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day. Table 2-4. Power indicator State Standby/Suspend L215p Wide Flat Panel Monitor User’s Guide Restoring Power Indicator Screen Operation...
Caring for your monitor Be sure to turn off the power before you perform any maintenance on the monitor. Do not: • Apply water or liquid directly to your monitor. • Use solvents or abrasives. • Use flammable cleaning materials to clean your monitor or any other electrical equipment.
Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Table 3-2. Troubleshooting Problem The words "Out...
Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the picture has horizontal disturbances in light picture. When the image no longer looks distorted, save the Clock and Phase adjustments. Press L215p Wide Flat Panel Monitor User’s Guide Possible cause Suggested action The video signal cable...
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.
Service information Product numbers The product number for your monitor is located on the side of the display bezel as The prodcut number for your monitor is located on the rear cover as show below. shown below. Type / Model L215pwA MTM :6325-HC1 Serial Number\序列号\ Date of Manufacture\生产日期\ Hz : 50/60 3.0KV 8.69Kg EU only Q40G22N-608-** Customer responsibilities...
Color Matching Profiles. Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 480 at a refresh rate of 60 Hz.
Telephone technical support Installation and configuration support through the Customer Support Center will be withdrawn or made available for a fee, at Lenovo’s discretion, 90 days after the option has been withdrawn from marketing. Additional support offerings, including step-by-step installation assistance, are available for a nominal fee.
Page 31
Country or Region Telephone Number Hungary +36-1-382-5720 India 1600-44-6666 Alternate Toll Free: +91-80-2678-8940 (English) Indonesia 800-140-3555 +62-21-251-2955 (English, Bahasa, Indonesian) Ireland Up and running support: 01-815-9202 Warranty service and support: 01-881-1444 (English) Italy Up and running support: 02-7031-6101 Warranty service and support: +39-800-820094 (Italian) Japan Desktop:...
Page 32
Spain Sri Lanka Sweden Switzerland Taiwan Thailand Turkey United Kingdom United States Uruguay Venezuela Vietnam L215p Wide Flat Panel Monitor User’s Guide Telephone Number +48-22-878-6999 +351-21-892-7147 (Portuguese) +4-021-224-4015 +7-095-940-2000 (Russian) 1800-3172-888 (English, Bahasa, Melayu) +421-2-4954-1217 +386-1-4796-699 91-714-7983 91-397-6503 (Spanish) +94-11-2448-442 (English)
Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Lenovo logo Microsoft,Windows,and Windows NT are trademarks of Microsoft Corporation in the United States,other countries,or both.