Table of Contents
Advertisement
Quick Links
DANGER
To avoid shock hazard:
• Do not remove the covers.
• Do not operate this product unless the stand is attached.
• Do not connect or disconnect this product during an electrical storm.
• The power cord plug must be connected to a properly wired and grounded power outlet.
• Any equipment to which this product will be attached must also be connected to properlywired and
grounded power outlets.
• To isolate the monitor from the electrical supply, you must remove the plug from the power outlet.
The power outlet should be easily accessible.
Handling:
• Your color monitor is heavy, so handle it with care. IBM recommends that this monitor is moved or
lifted by two people.
DANGER
Pour éviter les risques d'électrocution :
• Ne retirez pas les capots du moniteur.
• N'utilisez pas ce produit si le socle n'est pas fixé.
• Ne connectez, ni ne déconnectez ce produit pendant un orage.
• Le câble d'alimentation doit être connecté à une prise électrique correctement mise à la terre et en
bon état de marche.
• Tout équipement auquel ce produit est relié doit être également connecté à une prise correctement
mise à la terre et en bon état de marche.
• Pour isoler le moniteur de la source d'alimentation électrique, vous devez le débrancher de la prise
électrique. Cette prise doit être facile d'accès.
Manutention :
• Votre moniteur couleurs est lourd et doit donc être manipulé avec soin. IBM vous conseille de le
déplacer ou de le porter à deux.
GEFAHRENHINWEIS
Um die Gefahr eines elektrischen Schlags zu vermeiden, folgendes beachten:
• Unter keinen Umständen die Abdeckungen abnehmen.
• Das Produkt nicht in Betrieb nehmen, wenn der Sockel nicht montiert ist.
• Das Gerät nicht während eines Gewitters an eine Steckdose anschließen oder von ihr trennen.
• Das Netzkabel ist an eine ordnungsgemäß verdrahtete und geerdete Steckdose anzuschließen.
• Jedes Gerät, mit dem dieses Produkt verbunden wird, muß ebenfalls an eine ordnungsgemäß
verdrahtete und geerdete Steckdose angeschlossen werden.
• Um den Monitor von der Stromversorgung zu trennen, muß der Stecker aus der Steckdose
gezogen werden. Die Steckdose sollte leicht zugänglich sein.
Handhabungshinweis:
• Ihr Farbbildschirm ist schwer. Sie sollten daher beim Transport vorsichtig vorgehen. IBM empfiehlt
Ihnen, den Bildschirm zu zweit anzuheben bzw. zu tragen.
Advertisement
Table of Contents
Related Manuals for Lenovo T545
Summary of Contents for Lenovo T545
- Page 1 DANGER To avoid shock hazard: • Do not remove the covers. • Do not operate this product unless the stand is attached. • Do not connect or disconnect this product during an electrical storm. • The power cord plug must be connected to a properly wired and grounded power outlet. •...
- Page 2 GEVAAR Ga als volgt te werk om het gevaar van een elektrische schok te voorkomen: • Verwijder in geen enkel geval de kap. • Stel dit produkt alleen in werking als de voet is bevestigd. • Sluit dit apparaat niet aan op, of verbreek de aansluiting van dit apparaat niet van een contactdoos tijdens onweer.
- Page 3 PERIGO Para evitar o perigo de choques eléctricos: • Não retire as coberturas. • Não utilize este produto antes de montar a base. • Não ligue nem desligue este produto durante uma tempestade eléctrica. • O cabo de alimentação deve ser ligado a uma tomada eléctrica devidamente ligada à terra. •...
- Page 4 ARNING - LIVSFARA För att undvika risk för elektriska stötar måste du tänka på följande: • Ta inte bort några skyddskåpor. • Använd inte den här produkten innan du har satt fast stativet. • Anslut inte produkten till ett eluttag under åskväder. Koppla inte heller ur produkten från ett eluttag under åskväder.
- Page 5 • Bu cihaz7 elektriksel f7 rt7 na s7 ras7 nda prize takmay7 n7 z veya prizden ç7 karmay7n7 z. • Elektrik kablosunun fit i, elektrik ve toprak ba5 lant7 lar7 usulüne uygun olarak yap7 lm7t bir prize tak7 lmal7 d7 r. •...
- Page 10 위험 전기 충격을 피하려면, • 제품의 덮개를 제거하지 마십시오. • 스탠드가 부착되어 있지 않으면 이 제품을 작동시키지 마십시오. • 뇌우를 동반할 때는 제품을 연결하거나 분리하지 마십시오. • 전원 코드를 올바르게 배선 및 접지된 콘센트에 연결해야 합니다. • 이 제품에 연결할 모든 장비는 올바르게 배선 및 접지된 콘센트에 연결되어 있어야합니다.
- Page 11 3These user’s setup instructions cover typical user environments. The on-screen messages may differ depending on the level of your hardware and software. In some cases you may need to vary the setup procedures. For more information, refer to your computer or operating system manuals or consult your system administrator or dealer.
- Page 12 First Edition (May / 2001) This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or program(s) at any time.
-
Page 13: Table Of Contents
Setup...2 Hardware Requirements ...2 Handling Instructions ...2 Workplace preparation ...2 Working Practices ...3 Connecting your Monitor...4 Switching on your Monitor...4 Adjusting the Monitor Position ...5 Caring for your Monitor ...5 Configuring your Monitor ...6 Setup Diskette for Microsoft Windows95 or Microsoft Windows98...6 Setup Diskette for Microsoft Windows 2000 ...7 Auto Setup ...8 Auto Setup ...8... -
Page 14: Setup
Setup Hardware Requirements This monitor requires a computer with a suitable on-board sub-system or Video Adapter card that can support XGA 1024 x 768, SVGA 800 x 600, or VGA 640 x 480 at 60Hz. Handling Instructions Handling Instructions Do not support the monitor 1. -
Page 15: Workplace Preparation
Workplace Preparation Height This section gives advice on what you should The monitor should be positioned so that the top of the screen is slightly consider before you set up below your eye level when you sit at your workstation. your monitor. -
Page 16: Connecting Your Monitor
Connecting your Monitor 1. Turn off your computer and all attached devices. 2. Connect the monitor signal cable to the Video output of your computer Be sure to read the ‘Safety Information’ at the front of this User Guide before carrying out this procedure. -
Page 17: Adjusting The Monitor Position
Adjusting the Monitor Position Viewing Angle You can tilt the screen backward and forward as shown below(figure A). Rotate You can rotate the screen leftward and rightward as shown below(figure A). Height You can adjust height of the screen(figure B). Before adjusting your monitor for the first time, remove the locking clip on rear of the stand. -
Page 18: Configuring Your Monitor
Configuring your Monitor Setup Diskette for Microsoft®Windows®95 or Microsoft®Windows®98 This section must be To use the Plug and Play feature in Windows 95 or Windows 98, files completed before should be loaded from the IBM Monitor Installation diskette. continuing with the Microsoft Windows95 or 1. -
Page 19: Setup Diskette For Microsoft Windows 2000
Setup Diskette for Microsoft®Windows®2000 Professional This section must be To use the Plug and Play feature in Windows 2000, files should be loaded completed before from the IBM Monitor Installation diskette. continuing with the 1. Turn off the computer and all attached devices. Microsoft Windows2000 Auto Setup on page 8. -
Page 20: Auto Setup
Auto Setup Auto Setup When you first use your monitor you must perform Auto Setup. This procedure Before carrying out this sets up your monitor to process the video signals from your computer without section, it is very important image discoloration or smearing. After you perform Auto Setup, the settings are that The Setup Diskette for Windows 95 or Windows 98 stored and used each time you turn on the monitor. -
Page 21: Auto Setup For Dos
Auto Setup for DOS 1. Turn on the monitor first; then the computer. If the monitor is in standby mode (STANDBY ON), it If the message CHECK SIGNAL CABLE is displayed, or if nothing is may automatically turn off while you are waiting for it to warm displayed check: up. -
Page 22: Auto Setup For Microsoft Windows3.1, Microsoft Windows95, Microsoft Windows98, Microsoft Windows Nt Or Microsoft Windows2000
Auto Setup for Microsoft®Windows®3.1, Windows®95 or Microsoft®Windows®2000 1. Turn on the monitor first; then the computer. If the monitor is in standby mode (STANDBY ON), it may automatically turn off while you are waiting for it to warm up. 2. Wait approximately 15 minutes, until the monitor warms up. 3. - Page 23 10. Press the ESC key to return to Windows. You have completed the monitor setup for Windows. If you use other operat- ing systems, perform the appropriate AUTO SETUP for those systems, also: see Auto Setup for DOS on page 9.
-
Page 24: Manual Setup
Manual Setup Normally, you can complete the setup procedure using A if your screen image is still distorted after you perform A setup diskette does not run on your system, perform M If the monitor is in standby 1. Have your monitor turned on for about 15 minutes, until the monitor mode (STANDBY ON), it might automatically turn off while you are waiting for it to... -
Page 25: Adjusting Your Lcd Monitor
User controls User control features Icon The image is already optimized for many display modes, however the user controls can be used to adjust the image to your liking. The settings are saved after adjustment and when exiting the OSD and will be effective thereafter. - Page 26 CONTROLS LOCK / UNLOCK This feature allows you to secure the current control settings, while allowing the user to adjust Brightness, Contrast and initiate Auto Setup, so that they cannot be inadvertently changed. Push and hold the enter button[ ] for 10 seconds;...
-
Page 27: On-Screen Display (Osd) Controls
On-screen display (OSD) controls The settings adjustable with the user controls are viewed through the On - The LCD monitor needs Screen Display (OSD). Press the enter button [ time to become thermally menu. stable the first time you turn it on each day. - Page 28 OSD Icon COLOR OSD Position Description If manual is selected, the user will go to the manual adjustment screen. Select the Color Mode you find most comfortable and then fine tune the colors using the User Color Mode menu, if necessary. Changes the position of the OSD on the screen.
- Page 29 Description OSD Icon Reset should return all available functions (apart from language which should not change unless adjusted via the LANGUAGE menu) fo their factory RESET presets. Moves the screen left and right . It is not availible when the digital input H-POSITION Moves the screen up and down.
-
Page 30: Further Information
Further Information Display modes The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes. The image size, position and shape may change when the display mode changes. -
Page 31: Power Management
Power Management To benefit from power management, the monitor must be used in If your computer has conjunction with a computer that implements the Video Electronics previously been used with Standards Association (VESA) Display Power Management Signalling a CRT monitor and is currently (DPMS) Standard. -
Page 32: Troubleshooting
Troubleshooting If you have a problem setting up or using your monitor, you may be able to solve it yourself. Before calling your retailer or IBM, try the suggested actions that are appropriate to your problem. Sreen is blank and power indicator is off. - Page 33 Problem Sreen is blank and power indicator is flashing green every 0.5 second Sreen is blank and power indicator is flashing green every 0.5 or 1 second Image appears to be smeared For image problems, you may want to run ETUP again before consulting to this section.
-
Page 34: Further Help
Further Help Machine Name – T545H Color Monitor Warranty Period – Three (3) Years See the IBM Statement of Limited Warranty included in this publication for IBM’s warranty terms and conditions. The IBM Machine Warranty worldwide Web site at http://www-1.ibm.com/servers/support/machine_warranties/ provides a worldwide overview of IBM’s Limited Warranty for IBM Machines, a Glossary of IBM definitions, Frequently Asked Questions (FAQs) and Support by Product (Machine) with links to If possible, stay by your... - Page 35 Lift the bottom of the cable cover (A) and pull it off. 3. Lay the monitor facedown on a cushion and remove the four screws holding the hinge mechanism on the monitor. Lift off the hinge and base assembly(B). 4. If you are installing an arm or wall-mounting device, follow the directions included with the device.
-
Page 36: Specifications
Specifications DVI-I Connector (Digital/Analog) The DVI - I (Digital Visual Interface - integrated) port supports analog and digital signal inputs and also improves quality of the displayed image by eliminating poor video at the monitor source. Signal(DVI-I) T. M. D. S. Data2- T. - Page 37 Specifications This color monitor (Type-model 9493-Axx) uses a 15.1-inch TFT LCD. Dimensions Weight Stand Range Image Power consumption figures are for the monitor and the power supply combined. Power Input Power Consumption Video Input Sync Input Communications Supported Display Modes Environment 401.3 mm Width:...
- Page 38 Display Mode Ranges Refresh Rate / Addressabillty Range ( + / - 3%) 640 x 350 67.9 ~ 72.1 Hz 720 x 400 67.9 ~ 72.1 Hz 640 x 480 58.2 ~ 61.8 Hz 640 x 480 64.0 ~ 68.0 Hz 640 x 480 72.8 ~ 77.3 Hz 800 x 600...
-
Page 39: Warranty
Statement of Limited Warranty Part 1 - General Terms This Statement of Limited Warranty includes Part 1 - General Terms and Part 2 - Country-unique Terms. The terms of Part 2 replace or modify those of Part 1. The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. - Page 40 3. where applicable, before service is provided: a. follow the problem determination, problem analysis, and service request procedures that IBM or your reseller provides; b. secure all programs, data, and funds contained in a Machine; c. provide IBM or your reseller with sufficient, free, and safe access to your facilities to permit them to fulfill their obligations; and d.
- Page 41 CAMBODIA, LAOS, AND VIETNAM Governing Law: The following replaces “laws of the country in which you acquired the Machine” in the first sentence: laws of the State of New York. The following is added to this Section: Disputes and differences arising out of or in connection with this Agreement shall be finally settled by arbitration which shall be held in Singapore in accordance with the rules of the International Chamber of Commerce (ICC).
- Page 42 If you purchased an IBM Personal Computer Machine in Albania, Armenia, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan, Kirghizia, Federal Republic of Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service for that Machine in any of those countries from either (1) an IBM reseller approved to perform warranty service or (2) from IBM.
- Page 43 2. the amount of any other actual direct damages, up to 125 percent of the charges (if recurring, the 12 months’ charges apply) for the Machine that is the subject of the claim or which otherwise gives rise to the claim. Applicability of suppliers and resellers (unchanged).
- Page 44 Environmental Labelling of Personal Computers Congratulations! You have just purchased a TCO’95 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and to the further development of environmentally-adapted electronic products.
- Page 45 The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level, in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, along with physical and visual ergonomics and good usability.
- Page 46 Cadmium is present in rechargeable batteries and in the color-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium. The color-generating layers of display screens must not contain any cadmium.
- Page 47 Environmental Labelling of Personal Computers Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
- Page 48 Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric and magnetic fields, energy consumption and electrical and fire safety. The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things.
- Page 49 Environmental Flame retardants Flame retardants are present in printed circuit boards, cables, wires, requirements casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
-
Page 50: Service Information
Service Information The following parts are for use by IBM service, or IBM authorised dealers, to support the customer warranty. Parts are for service use only. P/NO Description 22P7473 FRU Monitor 22P7474 FRU Monitor 22P7475 FRU Video Interface Cable 22P7476 FRU Video Interface Cable... - Page 51 Compliances Federal Communications Commission (FCC) Statement IBM T545H color monitor Tested To Comply With FCC Standard FOR HOME OR OFFICE USE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 52 For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding-type attachment plug. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. IBM power cords for a specific country or region are usually available only in that country or region.
- Page 53 14F0032 UK, United Arab Emirate (Dubai), China (Hong (BS 1363/A) Kong S.A.R.), Singapore, Malaysia, Ireland, Cyprus, Bahrain, Jordan, Kuwait, Oman, Quatar, Yemen, Gambia, Malta, Botswana, Seychelles, Nigeria, Ghana, Kenya, Liberia, Malawi, Sierra Leone, Sudan, Tanzania, Zambia, Zimbabwe 13F9996 Denmark (DK2-5a) Italy, Chile 14F0068 (CEI 23-16)
- Page 54 Congratulations! You have just purchased a TCO99 approved and labeled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labeled computers? In many countries, environmental labeling has become an established method for encouraging the adaptation of goods and services to the environment.
- Page 55 products with regards to their eventual recycling and disposal. By proper selection of these materials and substances, the impact on the environment can be minimized. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments.
- Page 56 European Union (EU) Statement This product is in conformity with the protection requirements of the EU Council Directive 89/366/ECC on the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM can not accept responsibility for any failure to satisfy the protection requirements resulting from a non- recommended modification of the product, including the fitting of non-IBM option cards.
- Page 57 Dieses Gerat ist berechtigt in Ubereinstimmungmit dem Deutschen EMVG das EG-Konformitatszeichen - CE - zu fuhren. Verantwortlich fur die Konformitatserklarung nach Paragraph 5 des EMVG ist die: IBM Deutschland Informationssysteme GmbH, 70548 Stuttgart. Informationen in Hinsicht EMVG Paragraph 3 Abs. (2) 2: Das Gerat erfullt die Schutzanforderungen nach EN 50082-1 und EN 55022 Klasse B.
- Page 58 IBM non accetta responsabilità alcuna per la mancata conformità alle normative di protezione dovuta a modifiche non consi gliate al prodotto, compresa l’installazione di schede e componenti di marca diversa da IBM. Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le le apparecchiature di informatica Classe B ai sensi del CISPR 22 / Norma Europea EN 55022.
- Page 59 VCCI Class B Notice (Japan Only) This equipment complies with the limits for a Class B digital device (devices used in or adjacent to a residential environment) and conforms to the standards for information technology equipment that are set by the Voluntary Control Council for Interference for preventing radio frequency interference in residential areas.