Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instructions
1. SAFETY
1.1.
BATTERY SAFETY INSTRUCTIONS (BATTERY NOT INCLUDED)
WARNING! Battery contains Lithium-ion which is dangerous. Handle with care to avoid damage, fire, corrosion or personal injury.
‰
Charge battery prior to its first use. The battery will have been shipped in a low charge state. To reduce the risk of burns or fire:
9
DO NOT attempt to open, disassemble, modify or service the battery pack.
8
DO NOT crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT expose to temperatures above 40°C (104°F).
8
Replace only with the battery pack designated for this product.
9
Use only the charging base provided to charge the tool.
9
Remove the battery if the tool is not to be used for a period of time.
9
Keep the battery terminals and grooves free from wood chips, sawdust or soil.
9
DO NOT allow the battery to become fully discharged.
8
Recharge the battery when you notice the tool has less power.
9
DO NOT recharge a fully charged battery. Overcharging shortens the batteries service life.
8
Charge the battery at a room temperature between 5ºC to 45ºC.
9
Charge the battery if tool has not been used for 6 months.
9
DO NOT attempt recharging the battery by means of an engine generator or a DC power source.
8
WARNING! Dispose of spent batteries correctly as they contain Lithium-ion. DANGER! DO NOT attempt to disassemble the
‰
battery. For safety and environmental reasons DO NOT discard in domestic waste or by burning. ONLY discard or recycle according
to local authority regulations.
WARNING! DO NOT allow a leaking battery to contact your person.
‰
1.2.
GENERAL SAFETY
WARNING! Ensure that Health & Safety, local authority
‰
and general workshop practice regulations are adhered to
when using this equipment.
Familiarise yourself with the applications, limitations and
9
potential hazards peculiar to the tool.
WARNING! Disconnect the battery before changing
‰
accessories, servicing or performing any maintenance.
Maintain the tool in good condition (use an authorised
9
service agent).
Replace or repair damaged parts. Use genuine parts only.
9
Unauthorised parts may be dangerous and will invalidate
the warranty.
Keep the work area clean, uncluttered and ensure that
9
there is adequate lighting.
Keep the tool clean for best and safest performance.
9
Maintain correct balance and footing. Ensure the floor is
9
not slippery and wear non-slip shoes.
Remove ill fitting clothing. Remove ties, watches, rings and
9
other loose jewellery and contain, and/or tie back, long hair.
Keep children and unauthorised persons away from the
9
work area.
DO NOT use the tool for any purpose other than that for
9
which it is designed.
DO NOT operate the tool if any parts are damaged or
8
missing.
DO NOT get the tool wet or use in damp or wet locations or
8
areas where there is condensation.
DO NOT allow untrained persons to operate the tool.
8
DO NOT operate tool when you are tired or under the
8
influence of alcohol, drugs or intoxicating medication.
© Jack Sealey Limited
CORDLESS 20V TELESCOPIC POLE FOR
CP20VPSH/CP20VPHT
CP20VTP
MODEL NO:
CP20VTP
CP20VPSH
CP20VPHT
Original Language Version
(sold separately)
(sold separately)
CP20VTP Issue 1 25/10/21
Advertisement
Related Manuals for Sealey CP20VTP
Summary of Contents for Sealey CP20VTP
- Page 1 CP20VTP MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 WARNING! Before attaching the battery cartridge to the tool, firstly check that the trigger switch returns to the OFF position when ‰ released. WARNING! DO NOT use the tool if it can be started without pressing the lock button. Return the tool to an authorised Sealey ‰ service centre for repair.
- Page 3 Place the harness over your right shoulder only (fig.14). fig.12 fig.13 fig.14 9. MAINTENANCE 9.1. CLEANING 9.1.1. Use a clean cloth to remove dirt, dust, oil, grease etc. DO NOT use solvents. Original Language Version CP20VTP Issue 1 25/10/21 © Jack Sealey Limited...
- Page 4 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.