Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
C24-25
Brightness
Contrast
DCR
Display Mode
Scaling Mode
Over Drive
Input Signal: VGA
To use the controls:
1.
Press
to open the main OSD menu.
2.
Use
or
If there is a sub-menu, you can move between options using
select that function. Use
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, press and hold
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
75
to move among the icons. Select an icon and press
or
to make adjustments then press
for 10 seconds to lock the OSD. This will prevent accidental
1980x1080
100
0
or
for 10 seconds to unlock the OSD and allow
to access that function.
, then press
to
to save.
for 10 seconds to
2-4
Chapter 2.