Table of Contents
Advertisement
Trimming the threads between
characters
If the machine is set to trim the threads between
the characters, the jump stitches between the
characters are reduced and any other necessary
procedures after embroidering are reduced.
However, the embroidering time will increase if
the threads are trimmed between each of the
characters.
a
Touch
so that it changes to
• Each touch of the key turns the setting either on or off.
Threads are not
trimmed.
Combining the separated
character patterns
Two separated lines of character patterns can be
combined. The characters can be aligned to the
specified order. You cannot combine the lines of
character patterns if the text contains a line feed
using the Line Feed function.
a
Touch
.
The following screen is displayed.
.
b
Threads are
trimmed.
c
SELECTING/EDITING/SAVING PATTERNS
Memo
• The selected character is assigned as
Number 1.
Select the group of character patterns that
you want to combine.
• You can select the patterns by touching them on the
screen, or touching
or
to be selected, and then touch
Numbers 1 and 2 are assigned temporarily to the
patterns.
Touch
or
to choose the order of
the 2 patterns.
to check the patterns
.
5
155
Advertisement
Table of Contents
Troubleshooting
