Page 1
UPC-GWS01 Gateway System for UPC-GWS01 User’s Manual 1 Last Updated: August 13, 2018...
Page 2
Copyright Notice This document is copyrighted, 2018. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
Page 3
Acknowledgment All other products’ name or trademarks are properties of their respective owners. Microsoft Windows is a registered trademark of Microsoft Corp. Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation Core, Atom are trademarks of Intel Corporation ...
Page 4
Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity UPC-GWS01 WiFi Antenna If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Preface...
Page 5
About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the AAEON.com for the latest version of this document.
Page 6
Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
Page 7
If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device...
Page 8
FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Page 10
China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Main Board/ Daughter Board/ Backplane Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB &...
Specifications System 91 x 67 x 55.2mm (L x W x H) Form Factor Intel® Atom™ x5-Z8350 Processor Intel® Atom™ x5-z8350 Processor (2M CPU Frequency Cache, 1.44 GHz up to 1.92 GHz) CPU with 64 bit architecture; Quad Core Intel®...
Page 14
Display VGA/LCD Controller Intel® HD Graphics Realtek RTL8111G-CG Ethernet HDMI Audio USB 3.0 x 1 Ethernet RJ45 x 1 DB9 x 1 16 GB / 32 GB / 64 GB Onboard eMMC 100 PIN Docking Connector Expansion Slot ...
List of Jumpers and Connectors Please refer to the table below for all of the board’s jumpers that you can configure for your application Label Function Power Jack Input HDMI connector USB 3.0 connector RJ45 Ethernet connector COM port Antenna Chapter 2 –...
Driver Download and Installation Please download the driver from the AAEON website - http://www.aaeon.com/en/p/iot-gateway-upc-gws01. It contains all the drivers and utilities you need to set up your product. Follow the steps below to install the drivers. Step 1 – Install Chipset Drivers Open the Step 1-Chipset folder and select your OS Open the Setup.exe file in the folder Follow the instructions...
Page 21
Step 5 – Install LAN Drivers Open the Step 5-LAN folder and select your OS Open the setup.exe file in the folder Follow the instructions Drivers will be installed automatically Step 6 – Install USB to UART Drivers Open the Step 6-UsbToUart folder and select your OS Open the setup.exe file in the folder Follow the instructions Drivers will be installed automatically...