Paper Is Smudged/Printed Surface Is Scratched - Canon iX6800 Series Online Manual
Hide thumbs
Also See for iX6800 Series:
- Online manual (495 pages) ,
- Quick installation (4 pages) ,
- Installation manual (4 pages)
Table of Contents
Advertisement
Paper Is Smudged/Printed Surface Is Scratched
Paper Is Smudged
The Edges of Paper Are Smudged Printed Surface Is Smudged
Printed Surface Is Scratched
Did you confirm the paper and print quality settings?
Check1
Print Results Not Satisfactory
Is the appropriate type of paper used? Check the followings:
Check2
• Check to see if the paper you are printing on is suitable for your printing purpose.
Media Types You Can Use
• When performing Borderless Printing, make sure that the paper you are using is suitable for Borderless
Printing.
If the paper you are using is not suitable for Borderless Printing, the print quality may be reduced at the top
and bottom edges of the paper.
Printing Area
Load the paper after correcting its curl.
Check3
When using Photo Paper Plus Semi-gloss, even if the sheet is curled, load one sheet at a time as it is. If you roll
up this paper to flatten, this may cause cracks on the surface of the paper and reduce the print quality.
We recommend putting unused paper back into the package and keeping it on a level surface.
• For Plain Paper
Turn the paper over and reload it to print on the other side.
Leaving the paper loaded on the rear tray for a long time may cause the paper to curl. In this case, load the
paper with the other side facing up. It may resolve the problem.
• For Other Paper
If the curl on the four corners of the paper is more than 0.1 inch / 3 mm (A) in height, the paper may be
smudged or may not be fed properly. In such cases, follow the procedure described below to correct the
paper curl.
391
Advertisement
Table of Contents
